This patch replace "B_UINT32" with "u32" in
target_params.h
Signed-off-by: Kevin McKinney <klmckinney1@xxxxxxxxx>
---
drivers/staging/bcm/target_params.h | 72 +++++++++++++++++------------------
1 file changed, 36 insertions(+), 36 deletions(-)
diff --git a/drivers/staging/bcm/target_params.h b/drivers/staging/bcm/target_params.h
index 86069ce..e416dac 100644
--- a/drivers/staging/bcm/target_params.h
+++ b/drivers/staging/bcm/target_params.h
@@ -2,56 +2,56 @@
#define TARGET_PARAMS_H
typedef struct _TARGET_PARAMS {
- B_UINT32 m_u32CfgVersion;
- B_UINT32 m_u32CenterFrequency;
- B_UINT32 m_u32BandAScan;
- B_UINT32 m_u32BandBScan;
- B_UINT32 m_u32BandCScan;
- B_UINT32 m_u32ErtpsOptions;
- B_UINT32 m_u32PHSEnable;
- B_UINT32 m_u32HoEnable;
- B_UINT32 m_u32HoReserved1;
- B_UINT32 m_u32HoReserved2;
- B_UINT32 m_u32MimoEnable;
- B_UINT32 m_u32SecurityEnable;
- B_UINT32 m_u32PowerSavingModesEnable; /* bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable */
+ u32 m_u32CfgVersion;
+ u32 m_u32CenterFrequency;
+ u32 m_u32BandAScan;
+ u32 m_u32BandBScan;
+ u32 m_u32BandCScan;
+ u32 m_u32ErtpsOptions;
+ u32 m_u32PHSEnable;
+ u32 m_u32HoEnable;
+ u32 m_u32HoReserved1;
+ u32 m_u32HoReserved2;
+ u32 m_u32MimoEnable;
+ u32 m_u32SecurityEnable;
+ u32 m_u32PowerSavingModesEnable; /* bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable */
/* PowerSaving Mode Options:
* bit 0 = 1: CPE mode - to keep pcmcia if alive;
* bit 1 = 1: CINR reporting in Idlemode Msg
* bit 2 = 1: Default PSC Enable in sleepmode
*/
- B_UINT32 m_u32PowerSavingModeOptions;
- B_UINT32 m_u32ArqEnable;
+ u32 m_u32PowerSavingModeOptions;
+ u32 m_u32ArqEnable;
/* From Version #3, the HARQ section renamed as general */
- B_UINT32 m_u32HarqEnable;
- B_UINT32 m_u32EEPROMFlag;
+ u32 m_u32HarqEnable;
+ u32 m_u32EEPROMFlag;
/* BINARY TYPE - 4th MSByte: Interface Type - 3rd MSByte: Vendor Type - 2nd MSByte
* Unused - LSByte
*/
- B_UINT32 m_u32Customize;
- B_UINT32 m_u32ConfigBW; /* In Hz */
- B_UINT32 m_u32ShutDownInitThresholdTimer;
- B_UINT32 m_u32RadioParameter;
- B_UINT32 m_u32PhyParameter1;
- B_UINT32 m_u32PhyParameter2;
- B_UINT32 m_u32PhyParameter3;
- B_UINT32 m_u32TestOptions; /* in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17 test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack */
- B_UINT32 m_u32MaxMACDataperDLFrame;
- B_UINT32 m_u32MaxMACDataperULFrame;
- B_UINT32 m_u32Corr2MacFlags;
- B_UINT32 HostDrvrConfig1;
- B_UINT32 HostDrvrConfig2;
- B_UINT32 HostDrvrConfig3;
- B_UINT32 HostDrvrConfig4;
- B_UINT32 HostDrvrConfig5;
- B_UINT32 HostDrvrConfig6;
- B_UINT32 m_u32SegmentedPUSCenable;
+ u32 m_u32Customize;
+ u32 m_u32ConfigBW; /* In Hz */
+ u32 m_u32ShutDownInitThresholdTimer;
+ u32 m_u32RadioParameter;
+ u32 m_u32PhyParameter1;
+ u32 m_u32PhyParameter2;
+ u32 m_u32PhyParameter3;
+ u32 m_u32TestOptions; /* in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17 test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack */
+ u32 m_u32MaxMACDataperDLFrame;
+ u32 m_u32MaxMACDataperULFrame;
+ u32 m_u32Corr2MacFlags;
+ u32 HostDrvrConfig1;
+ u32 HostDrvrConfig2;
+ u32 HostDrvrConfig3;
+ u32 HostDrvrConfig4;
+ u32 HostDrvrConfig5;
+ u32 HostDrvrConfig6;
+ u32 m_u32SegmentedPUSCenable;
/* removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
* BAMC Related Parameters
* Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 – Enable Band AMC signaling.
* bit 16-31 Band AMC Data configuration: Bit 16 = 1 – Band AMC 2x3 support.
*/
- B_UINT32 m_u32BandAMCEnable;
+ u32 m_u32BandAMCEnable;
} stTargetParams, TARGET_PARAMS, *PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;
#endif
--
1.7.9.5
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
