This patch fixes all white space issues in
led_control.h as reported by checkpatch.pl.
Signed-off-by: Kevin McKinney <klmckinney1@xxxxxxxxx>
---
drivers/staging/bcm/led_control.h | 95 ++++++++++++++++---------------------
1 file changed, 41 insertions(+), 54 deletions(-)
diff --git a/drivers/staging/bcm/led_control.h b/drivers/staging/bcm/led_control.h
index ed8fbc0..1f6c11d 100644
--- a/drivers/staging/bcm/led_control.h
+++ b/drivers/staging/bcm/led_control.h
@@ -2,70 +2,60 @@
#define _LED_CONTROL_H
/*************************TYPE DEF**********************/
-#define NUM_OF_LEDS 4
-
+#define NUM_OF_LEDS 4
#define DSD_START_OFFSET 0x0200
#define EEPROM_VERSION_OFFSET 0x020E
#define EEPROM_HW_PARAM_POINTER_ADDRESS 0x0218
#define EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5 0x0220
#define GPIO_SECTION_START_OFFSET 0x03
-
-#define COMPATIBILITY_SECTION_LENGTH 42
-#define COMPATIBILITY_SECTION_LENGTH_MAP5 84
-
-
-#define EEPROM_MAP5_MAJORVERSION 5
-#define EEPROM_MAP5_MINORVERSION 0
-
-
+#define COMPATIBILITY_SECTION_LENGTH 42
+#define COMPATIBILITY_SECTION_LENGTH_MAP5 84
+#define EEPROM_MAP5_MAJORVERSION 5
+#define EEPROM_MAP5_MINORVERSION 0
#define MAX_NUM_OF_BLINKS 10
#define NUM_OF_GPIO_PINS 16
-
#define DISABLE_GPIO_NUM 0xFF
#define EVENT_SIGNALED 1
-
#define MAX_FILE_NAME_BUFFER_SIZE 100
-#define TURN_ON_LED(GPIO, index) do { \
- UINT gpio_val = GPIO; \
- (Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
- wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)) : \
- wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
- } while (0);
+#define TURN_ON_LED(GPIO, index) do { \
+ UINT gpio_val = GPIO; \
+ (Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
+ wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)) : \
+ wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
+ } while (0);
-#define TURN_OFF_LED(GPIO, index) do { \
- UINT gpio_val = GPIO; \
- (Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
- wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)) : \
- wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)); \
- } while (0);
+#define TURN_OFF_LED(GPIO, index) do { \
+ UINT gpio_val = GPIO; \
+ (Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
+ wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)) : \
+ wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)); \
+ } while (0);
#define B_ULONG32 unsigned long
/*******************************************************/
-
-
-typedef enum _LEDColors{
- RED_LED = 1,
- BLUE_LED = 2,
- YELLOW_LED = 3,
- GREEN_LED = 4
+typedef enum _LEDColors {
+ RED_LED = 1,
+ BLUE_LED = 2,
+ YELLOW_LED = 3,
+ GREEN_LED = 4
} LEDColors; /*Enumerated values of different LED types*/
typedef enum LedEvents {
- SHUTDOWN_EXIT = 0x00,
- DRIVER_INIT = 0x1,
- FW_DOWNLOAD = 0x2,
- FW_DOWNLOAD_DONE = 0x4,
- NO_NETWORK_ENTRY = 0x8,
- NORMAL_OPERATION = 0x10,
- LOWPOWER_MODE_ENTER = 0x20,
- IDLEMODE_CONTINUE = 0x40,
- IDLEMODE_EXIT = 0x80,
- LED_THREAD_INACTIVE = 0x100, /* Makes the LED thread Inactivce. It wil be equivallent to putting the thread on hold. */
- LED_THREAD_ACTIVE = 0x200, /* Makes the LED Thread Active back. */
- DRIVER_HALT = 0xff
-} LedEventInfo_t; /* Enumerated values of different driver states */
+ SHUTDOWN_EXIT = 0x00,
+ DRIVER_INIT = 0x1,
+ FW_DOWNLOAD = 0x2,
+ FW_DOWNLOAD_DONE = 0x4,
+ NO_NETWORK_ENTRY = 0x8,
+ NORMAL_OPERATION = 0x10,
+ LOWPOWER_MODE_ENTER = 0x20,
+ IDLEMODE_CONTINUE = 0x40,
+ IDLEMODE_EXIT = 0x80,
+ LED_THREAD_INACTIVE = 0x100, /* Makes the LED thread Inactivce. It wil be equivallent to putting the thread on hold. */
+ LED_THREAD_ACTIVE = 0x200, /* Makes the LED Thread Active back. */
+ DRIVER_HALT = 0xff
+} LedEventInfo_t; /* Enumerated values of different driver states */
/*
* Structure which stores the information of different LED types
@@ -79,24 +69,21 @@ typedef struct LedStateInfo_t {
UCHAR BitPolarity; /* To represent whether H/W is normal polarity or reverse polarity */
} LEDStateInfo, *pLEDStateInfo;
-
typedef struct _LED_INFO_STRUCT {
LEDStateInfo LEDState[NUM_OF_LEDS];
BOOLEAN bIdleMode_tx_from_host; /* Variable to notify whether driver came out from idlemode due to Host or target*/
- BOOLEAN bIdle_led_off;
- wait_queue_head_t notify_led_event;
+ BOOLEAN bIdle_led_off;
+ wait_queue_head_t notify_led_event;
wait_queue_head_t idleModeSyncEvent;
- struct task_struct *led_cntrl_threadid;
- int led_thread_running;
- BOOLEAN bLedInitDone;
+ struct task_struct *led_cntrl_threadid;
+ int led_thread_running;
+ BOOLEAN bLedInitDone;
} LED_INFO_STRUCT, *PLED_INFO_STRUCT;
+
/* LED Thread state. */
#define BCM_LED_THREAD_DISABLED 0 /* LED Thread is not running. */
#define BCM_LED_THREAD_RUNNING_ACTIVELY 1 /* LED thread is running. */
#define BCM_LED_THREAD_RUNNING_INACTIVELY 2 /*LED thread has been put on hold*/
-
-
#endif
-
--
1.7.9.5
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
