[PATCH 01/14 v2] Staging: bcm: Fix all white space issues in nvm.h

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch fixes all white space issues in
nvm.h as reported by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@xxxxxxxxx>
---
 drivers/staging/bcm/nvm.h |  424 ++++++++++++++++++---------------------------
 1 file changed, 169 insertions(+), 255 deletions(-)

diff --git a/drivers/staging/bcm/nvm.h b/drivers/staging/bcm/nvm.h
index 651b5a4..fd03582 100644
--- a/drivers/staging/bcm/nvm.h
+++ b/drivers/staging/bcm/nvm.h
@@ -10,15 +10,14 @@
 //
 //
 // Revision History:
-//	 Who 		When		What
-//	 --------	--------	----------------------------------------------
-//	 Name		Date		Created/reviewed/modified
+//	Who		When		What
+//	--------	--------	----------------------------------------------
+//	Name		Date		Created/reviewed/modified
 //
 // Notes:
 //
 ****************************************************************************************/
 
-
 #ifndef _NVM_H_
 #define _NVM_H_
 
@@ -26,169 +25,121 @@ typedef struct _FLASH_SECTOR_INFO
 {
 	UINT uiSectorSig;
 	UINT uiSectorSize;
-
-}FLASH_SECTOR_INFO,*PFLASH_SECTOR_INFO;
+} FLASH_SECTOR_INFO, *PFLASH_SECTOR_INFO;
 
 typedef struct _FLASH_CS_INFO
 {
 	B_UINT32 MagicNumber;
-// let the magic number be 0xBECE-F1A5 - F1A5 for "flas-h"
-
-	B_UINT32 FlashLayoutVersion ;
-
-    // ISO Image/Format/BuildTool versioning
-    B_UINT32 ISOImageVersion;
-
-    // SCSI/Flash BootLoader versioning
-    B_UINT32 SCSIFirmwareVersion;
-
-
+	// let the magic number be 0xBECE-F1A5 - F1A5 for "flas-h"
+	B_UINT32 FlashLayoutVersion;
+	// ISO Image/Format/BuildTool versioning
+	B_UINT32 ISOImageVersion;
+	// SCSI/Flash BootLoader versioning
+	B_UINT32 SCSIFirmwareVersion;
 	B_UINT32 OffsetFromZeroForPart1ISOImage;
-// typically 0
-
+	// typically 0
 	B_UINT32 OffsetFromZeroForScsiFirmware;
-//typically at 12MB
-
-	B_UINT32 SizeOfScsiFirmware ;
-//size of the firmware - depends on binary size
-
+	//typically at 12MB
+	B_UINT32 SizeOfScsiFirmware;
+	//size of the firmware - depends on binary size
 	B_UINT32 OffsetFromZeroForPart2ISOImage;
-// typically at first Word Aligned offset 12MB +                 sizeOfScsiFirmware.
-
+	// typically at first Word Aligned offset 12MB +                 sizeOfScsiFirmware.
 	B_UINT32 OffsetFromZeroForCalibrationStart;
-// typically at 15MB
-
+	// typically at 15MB
 	B_UINT32 OffsetFromZeroForCalibrationEnd;
-
-// VSA0 offsets
+	// VSA0 offsets
 	B_UINT32 OffsetFromZeroForVSAStart;
 	B_UINT32 OffsetFromZeroForVSAEnd;
-
-// Control Section offsets
+	// Control Section offsets
 	B_UINT32 OffsetFromZeroForControlSectionStart;
 	B_UINT32 OffsetFromZeroForControlSectionData;
-
-// NO Data Activity timeout to switch from MSC to NW Mode
+	// NO Data Activity timeout to switch from MSC to NW Mode
 	B_UINT32 CDLessInactivityTimeout;
-
-// New ISO Image Signature
+	// New ISO Image Signature
 	B_UINT32 NewImageSignature;
-
-// Signature to validate the sector size.
+	// Signature to validate the sector size.
 	B_UINT32 FlashSectorSizeSig;
-
-// Sector Size
+	// Sector Size
 	B_UINT32 FlashSectorSize;
-
-// Write Size Support
+	// Write Size Support
 	B_UINT32 FlashWriteSupportSize;
-
-// Total Flash Size
+	// Total Flash Size
 	B_UINT32 TotalFlashSize;
-
-// Flash Base Address for offset specified
+	// Flash Base Address for offset specified
 	B_UINT32 FlashBaseAddr;
-
-// Flash Part Max Size
+	// Flash Part Max Size
 	B_UINT32 FlashPartMaxSize;
-
-// Is CDLess or Flash Bootloader
+	// Is CDLess or Flash Bootloader
 	B_UINT32 IsCDLessDeviceBootSig;
-
-// MSC Timeout after reset to switch from MSC to NW Mode
+	// MSC Timeout after reset to switch from MSC to NW Mode
 	B_UINT32 MassStorageTimeout;
+} FLASH_CS_INFO, *PFLASH_CS_INFO;
 
-
-}FLASH_CS_INFO,*PFLASH_CS_INFO;
-
-#define FLASH2X_TOTAL_SIZE (64*1024*1024)
-#define DEFAULT_SECTOR_SIZE                     (64*1024)
+#define FLASH2X_TOTAL_SIZE	(64 * 1024 * 1024)
+#define DEFAULT_SECTOR_SIZE	(64 * 1024)
 
 typedef struct _FLASH_2X_CS_INFO
 {
-
 	// magic number as 0xBECE-F1A5 - F1A5 for "flas-h"
 	B_UINT32 MagicNumber;
-
-	B_UINT32 FlashLayoutVersion ;
-
-    // ISO Image/Format/BuildTool versioning
-    B_UINT32 ISOImageVersion;
-
-    // SCSI/Flash BootLoader versioning
-    B_UINT32 SCSIFirmwareVersion;
-
+	B_UINT32 FlashLayoutVersion;
+	// ISO Image/Format/BuildTool versioning
+	B_UINT32 ISOImageVersion;
+	// SCSI/Flash BootLoader versioning
+	B_UINT32 SCSIFirmwareVersion;
 	// ISO Image1 Part1/SCSI Firmware/Flash Bootloader Start offset, size
 	B_UINT32 OffsetFromZeroForPart1ISOImage;
 	B_UINT32 OffsetFromZeroForScsiFirmware;
-	B_UINT32 SizeOfScsiFirmware ;
-
+	B_UINT32 SizeOfScsiFirmware;
 	// ISO Image1 Part2 start offset
 	B_UINT32 OffsetFromZeroForPart2ISOImage;
-
-
 	// DSD0 offset
 	B_UINT32 OffsetFromZeroForDSDStart;
 	B_UINT32 OffsetFromZeroForDSDEnd;
-
 	// VSA0 offset
 	B_UINT32 OffsetFromZeroForVSAStart;
 	B_UINT32 OffsetFromZeroForVSAEnd;
-
 	// Control Section offset
 	B_UINT32 OffsetFromZeroForControlSectionStart;
 	B_UINT32 OffsetFromZeroForControlSectionData;
-
 	// NO Data Activity timeout to switch from MSC to NW Mode
 	B_UINT32 CDLessInactivityTimeout;
-
 	// New ISO Image Signature
 	B_UINT32 NewImageSignature;
-
 	B_UINT32 FlashSectorSizeSig;			// Sector Size Signature
 	B_UINT32 FlashSectorSize;			// Sector Size
-	B_UINT32 FlashWriteSupportSize; 	// Write Size Support
-
+	B_UINT32 FlashWriteSupportSize;			// Write Size Support
 	B_UINT32 TotalFlashSize;			// Total Flash Size
-
 	// Flash Base Address for offset specified
 	B_UINT32 FlashBaseAddr;
 	B_UINT32 FlashPartMaxSize;			// Flash Part Max Size
-
 	// Is CDLess or Flash Bootloader
 	B_UINT32 IsCDLessDeviceBootSig;
-
 	// MSC Timeout after reset to switch from MSC to NW Mode
 	B_UINT32 MassStorageTimeout;
-
 	/* Flash Map 2.0 Field */
-	B_UINT32 OffsetISOImage1Part1Start; 	// ISO Image1 Part1 offset
+	B_UINT32 OffsetISOImage1Part1Start;	// ISO Image1 Part1 offset
 	B_UINT32 OffsetISOImage1Part1End;
-	B_UINT32 OffsetISOImage1Part2Start; 	// ISO Image1 Part2 offset
+	B_UINT32 OffsetISOImage1Part2Start;	// ISO Image1 Part2 offset
 	B_UINT32 OffsetISOImage1Part2End;
-	B_UINT32 OffsetISOImage1Part3Start; 	// ISO Image1 Part3 offset
+	B_UINT32 OffsetISOImage1Part3Start;	// ISO Image1 Part3 offset
 	B_UINT32 OffsetISOImage1Part3End;
-
-	B_UINT32 OffsetISOImage2Part1Start; 	// ISO Image2 Part1 offset
+	B_UINT32 OffsetISOImage2Part1Start;	// ISO Image2 Part1 offset
 	B_UINT32 OffsetISOImage2Part1End;
-	B_UINT32 OffsetISOImage2Part2Start; 	// ISO Image2 Part2 offset
+	B_UINT32 OffsetISOImage2Part2Start;	// ISO Image2 Part2 offset
 	B_UINT32 OffsetISOImage2Part2End;
-	B_UINT32 OffsetISOImage2Part3Start; 	// ISO Image2 Part3 offset
+	B_UINT32 OffsetISOImage2Part3Start;	// ISO Image2 Part3 offset
 	B_UINT32 OffsetISOImage2Part3End;
-
-
 	// DSD Header offset from start of DSD
 	B_UINT32 OffsetFromDSDStartForDSDHeader;
 	B_UINT32 OffsetFromZeroForDSD1Start;	// DSD 1 offset
 	B_UINT32 OffsetFromZeroForDSD1End;
 	B_UINT32 OffsetFromZeroForDSD2Start;	// DSD 2 offset
 	B_UINT32 OffsetFromZeroForDSD2End;
-
 	B_UINT32 OffsetFromZeroForVSA1Start;	// VSA 1 offset
 	B_UINT32 OffsetFromZeroForVSA1End;
 	B_UINT32 OffsetFromZeroForVSA2Start;	// VSA 2 offset
 	B_UINT32 OffsetFromZeroForVSA2End;
-
 	/*
 *	 ACCESS_BITS_PER_SECTOR	2
 *	ACCESS_RW			0
@@ -196,11 +147,9 @@ typedef struct _FLASH_2X_CS_INFO
 *	ACCESS_RESVD			2
 *	ACCESS_RESVD			3
 *	*/
-	B_UINT32 SectorAccessBitMap[FLASH2X_TOTAL_SIZE/(DEFAULT_SECTOR_SIZE *16)];
-
+	B_UINT32 SectorAccessBitMap[FLASH2X_TOTAL_SIZE / (DEFAULT_SECTOR_SIZE * 16)];
 // All expansions to the control data structure should add here
-
-}FLASH2X_CS_INFO,*PFLASH2X_CS_INFO;
+} FLASH2X_CS_INFO, *PFLASH2X_CS_INFO;
 
 typedef struct _VENDOR_SECTION_INFO
 {
@@ -208,14 +157,12 @@ typedef struct _VENDOR_SECTION_INFO
 	B_UINT32 OffsetFromZeroForSectionEnd;
 	B_UINT32 AccessFlags;
 	B_UINT32 Reserved[16];
-
 } VENDOR_SECTION_INFO, *PVENDOR_SECTION_INFO;
 
 typedef struct _FLASH2X_VENDORSPECIFIC_INFO
 {
 	VENDOR_SECTION_INFO VendorSection[TOTAL_SECTIONS];
 	B_UINT32 Reserved[16];
-
 } FLASH2X_VENDORSPECIFIC_INFO, *PFLASH2X_VENDORSPECIFIC_INFO;
 
 typedef struct _DSD_HEADER
@@ -226,8 +173,7 @@ typedef struct _DSD_HEADER
 	//We should not consider right now. Reading reserve is worthless.
 	B_UINT32 Reserved[252]; // Resvd for DSD Header
 	B_UINT32 DSDImageMagicNumber;
-
-}DSD_HEADER, *PDSD_HEADER;
+} DSD_HEADER, *PDSD_HEADER;
 
 typedef struct _ISO_HEADER
 {
@@ -237,173 +183,141 @@ typedef struct _ISO_HEADER
 	B_UINT32 ISOImagePriority;
 	//We should not consider right now. Reading reserve is worthless.
 	B_UINT32 Reserved[60]; //Resvd for ISO Header extension
-
-}ISO_HEADER, *PISO_HEADER;
-
-#define EEPROM_BEGIN_CIS (0)
-#define EEPROM_BEGIN_NON_CIS (0x200)
-#define EEPROM_END (0x2000)
-
-#define INIT_PARAMS_SIGNATURE (0x95a7a597)
-
-#define MAX_INIT_PARAMS_LENGTH (2048)
-
-
-#define MAC_ADDRESS_OFFSET 0x200
-
-
-#define INIT_PARAMS_1_SIGNATURE_ADDRESS  EEPROM_BEGIN_NON_CIS
-#define INIT_PARAMS_1_DATA_ADDRESS (INIT_PARAMS_1_SIGNATURE_ADDRESS+16)
-#define INIT_PARAMS_1_MACADDRESS_ADDRESS (MAC_ADDRESS_OFFSET)
-#define INIT_PARAMS_1_LENGTH_ADDRESS   (INIT_PARAMS_1_SIGNATURE_ADDRESS+4)
-
-#define INIT_PARAMS_2_SIGNATURE_ADDRESS  (EEPROM_BEGIN_NON_CIS+2048+16)
-#define INIT_PARAMS_2_DATA_ADDRESS (INIT_PARAMS_2_SIGNATURE_ADDRESS+16)
-#define INIT_PARAMS_2_MACADDRESS_ADDRESS (INIT_PARAMS_2_SIGNATURE_ADDRESS+8)
-#define INIT_PARAMS_2_LENGTH_ADDRESS   (INIT_PARAMS_2_SIGNATURE_ADDRESS+4)
-
-#define EEPROM_SPI_DEV_CONFIG_REG				 0x0F003000
-#define EEPROM_SPI_Q_STATUS1_REG                 0x0F003004
-#define EEPROM_SPI_Q_STATUS1_MASK_REG            0x0F00300C
-
-#define EEPROM_SPI_Q_STATUS_REG                  0x0F003008
-#define EEPROM_CMDQ_SPI_REG                      0x0F003018
-#define EEPROM_WRITE_DATAQ_REG					 0x0F00301C
-#define EEPROM_READ_DATAQ_REG					 0x0F003020
-#define SPI_FLUSH_REG 							 0x0F00304C
-
-#define EEPROM_WRITE_ENABLE						 0x06000000
-#define EEPROM_READ_STATUS_REGISTER				 0x05000000
-#define EEPROM_16_BYTE_PAGE_WRITE				 0xFA000000
-#define EEPROM_WRITE_QUEUE_EMPTY				 0x00001000
-#define EEPROM_WRITE_QUEUE_AVAIL				 0x00002000
-#define EEPROM_WRITE_QUEUE_FULL					 0x00004000
-#define EEPROM_16_BYTE_PAGE_READ				 0xFB000000
-#define EEPROM_4_BYTE_PAGE_READ					 0x3B000000
-
-#define EEPROM_CMD_QUEUE_FLUSH					 0x00000001
-#define EEPROM_WRITE_QUEUE_FLUSH				 0x00000002
-#define EEPROM_READ_QUEUE_FLUSH					 0x00000004
-#define EEPROM_ETH_QUEUE_FLUSH					 0x00000008
-#define EEPROM_ALL_QUEUE_FLUSH					 0x0000000f
-#define EEPROM_READ_ENABLE						 0x06000000
-#define EEPROM_16_BYTE_PAGE_WRITE				 0xFA000000
-#define EEPROM_READ_DATA_FULL				 	 0x00000010
-#define EEPROM_READ_DATA_AVAIL				 	 0x00000020
-#define EEPROM_READ_QUEUE_EMPTY				 	 0x00000002
-#define EEPROM_CMD_QUEUE_EMPTY				 	 0x00000100
-#define EEPROM_CMD_QUEUE_AVAIL				 	 0x00000200
-#define EEPROM_CMD_QUEUE_FULL					 0x00000400
+} ISO_HEADER, *PISO_HEADER;
+
+#define EEPROM_BEGIN_CIS	(0)
+#define EEPROM_BEGIN_NON_CIS	(0x200)
+#define EEPROM_END		(0x2000)
+#define INIT_PARAMS_SIGNATURE	(0x95a7a597)
+#define MAX_INIT_PARAMS_LENGTH	(2048)
+#define MAC_ADDRESS_OFFSET	0x200
+
+#define INIT_PARAMS_1_SIGNATURE_ADDRESS		EEPROM_BEGIN_NON_CIS
+#define INIT_PARAMS_1_DATA_ADDRESS		(INIT_PARAMS_1_SIGNATURE_ADDRESS+16)
+#define INIT_PARAMS_1_MACADDRESS_ADDRESS	(MAC_ADDRESS_OFFSET)
+#define INIT_PARAMS_1_LENGTH_ADDRESS		(INIT_PARAMS_1_SIGNATURE_ADDRESS+4)
+
+#define INIT_PARAMS_2_SIGNATURE_ADDRESS		(EEPROM_BEGIN_NON_CIS + 2048 + 16)
+#define INIT_PARAMS_2_DATA_ADDRESS		(INIT_PARAMS_2_SIGNATURE_ADDRESS + 16)
+#define INIT_PARAMS_2_MACADDRESS_ADDRESS	(INIT_PARAMS_2_SIGNATURE_ADDRESS + 8)
+#define INIT_PARAMS_2_LENGTH_ADDRESS		(INIT_PARAMS_2_SIGNATURE_ADDRESS + 4)
+
+#define EEPROM_SPI_DEV_CONFIG_REG		0x0F003000
+#define EEPROM_SPI_Q_STATUS1_REG		0x0F003004
+#define EEPROM_SPI_Q_STATUS1_MASK_REG		0x0F00300C
+
+#define EEPROM_SPI_Q_STATUS_REG			0x0F003008
+#define EEPROM_CMDQ_SPI_REG			0x0F003018
+#define EEPROM_WRITE_DATAQ_REG			0x0F00301C
+#define EEPROM_READ_DATAQ_REG			0x0F003020
+#define SPI_FLUSH_REG				0x0F00304C
+
+#define EEPROM_WRITE_ENABLE			0x06000000
+#define EEPROM_READ_STATUS_REGISTER		0x05000000
+#define EEPROM_16_BYTE_PAGE_WRITE		0xFA000000
+#define EEPROM_WRITE_QUEUE_EMPTY		0x00001000
+#define EEPROM_WRITE_QUEUE_AVAIL		0x00002000
+#define EEPROM_WRITE_QUEUE_FULL			0x00004000
+#define EEPROM_16_BYTE_PAGE_READ		0xFB000000
+#define EEPROM_4_BYTE_PAGE_READ			0x3B000000
+
+#define EEPROM_CMD_QUEUE_FLUSH			0x00000001
+#define EEPROM_WRITE_QUEUE_FLUSH		0x00000002
+#define EEPROM_READ_QUEUE_FLUSH			0x00000004
+#define EEPROM_ETH_QUEUE_FLUSH			0x00000008
+#define EEPROM_ALL_QUEUE_FLUSH			0x0000000f
+#define EEPROM_READ_ENABLE			0x06000000
+#define EEPROM_16_BYTE_PAGE_WRITE		0xFA000000
+#define EEPROM_READ_DATA_FULL			0x00000010
+#define EEPROM_READ_DATA_AVAIL			0x00000020
+#define EEPROM_READ_QUEUE_EMPTY			0x00000002
+#define EEPROM_CMD_QUEUE_EMPTY			0x00000100
+#define EEPROM_CMD_QUEUE_AVAIL			0x00000200
+#define EEPROM_CMD_QUEUE_FULL			0x00000400
 
 /* Most EEPROM status register bit 0 indicates if the EEPROM is busy
  * with a write if set 1. See the details of the EEPROM Status Register
  * in the EEPROM data sheet. */
-#define EEPROM_STATUS_REG_WRITE_BUSY			 0x00000001
+#define EEPROM_STATUS_REG_WRITE_BUSY		0x00000001
 
 // We will have 1 mSec for every RETRIES_PER_DELAY count and have a max attempts of MAX_EEPROM_RETRIES
 // This will give us 80 mSec minimum of delay = 80mSecs
-#define MAX_EEPROM_RETRIES						 80
-#define RETRIES_PER_DELAY                        64
-
-
-#define MAX_RW_SIZE                              0x10
-#define MAX_READ_SIZE							 0x10
-#define MAX_SECTOR_SIZE                         (512*1024)
-#define MIN_SECTOR_SIZE                         (1024)
-#define FLASH_SECTOR_SIZE_OFFSET                 0xEFFFC
-#define FLASH_SECTOR_SIZE_SIG_OFFSET             0xEFFF8
-#define FLASH_SECTOR_SIZE_SIG                    0xCAFEBABE
-#define FLASH_CS_INFO_START_ADDR                 0xFF0000
-#define FLASH_CONTROL_STRUCT_SIGNATURE           0xBECEF1A5
-#define SCSI_FIRMWARE_MAJOR_VERSION				 0x1
-#define SCSI_FIRMWARE_MINOR_VERSION              0x5
-#define BYTE_WRITE_SUPPORT                       0x1
-
-#define FLASH_AUTO_INIT_BASE_ADDR                0xF00000
-
-
-
-
-#define FLASH_CONTIGIOUS_START_ADDR_AFTER_INIT   0x1C000000
-#define FLASH_CONTIGIOUS_START_ADDR_BEFORE_INIT  0x1F000000
-
-#define FLASH_CONTIGIOUS_START_ADDR_BCS350       0x08000000
-#define FLASH_CONTIGIOUS_END_ADDR_BCS350         0x08FFFFFF
-
-
-
-#define FLASH_SIZE_ADDR                          0xFFFFEC
-
-#define FLASH_SPI_CMDQ_REG						 0xAF003040
-#define FLASH_SPI_WRITEQ_REG					 0xAF003044
-#define FLASH_SPI_READQ_REG						 0xAF003048
-#define FLASH_CONFIG_REG                         0xAF003050
-#define FLASH_GPIO_CONFIG_REG					 0xAF000030
-
-#define FLASH_CMD_WRITE_ENABLE					 0x06
-#define FLASH_CMD_READ_ENABLE					 0x03
-#define FLASH_CMD_RESET_WRITE_ENABLE			 0x04
-#define FLASH_CMD_STATUS_REG_READ				 0x05
-#define FLASH_CMD_STATUS_REG_WRITE				 0x01
-#define FLASH_CMD_READ_ID                        0x9F
-
-#define PAD_SELECT_REGISTER                      0xAF000410
-
-#define FLASH_PART_SST25VF080B                   0xBF258E
-
-#define EEPROM_CAL_DATA_INTERNAL_LOC             0xbFB00008
-
-#define EEPROM_CALPARAM_START                    0x200
-#define EEPROM_SIZE_OFFSET                       524
+#define MAX_EEPROM_RETRIES			80
+#define RETRIES_PER_DELAY			64
+#define MAX_RW_SIZE				0x10
+#define MAX_READ_SIZE				0x10
+#define MAX_SECTOR_SIZE				(512 * 1024)
+#define MIN_SECTOR_SIZE				(1024)
+#define FLASH_SECTOR_SIZE_OFFSET		0xEFFFC
+#define FLASH_SECTOR_SIZE_SIG_OFFSET		0xEFFF8
+#define FLASH_SECTOR_SIZE_SIG			0xCAFEBABE
+#define FLASH_CS_INFO_START_ADDR		0xFF0000
+#define FLASH_CONTROL_STRUCT_SIGNATURE		0xBECEF1A5
+#define SCSI_FIRMWARE_MAJOR_VERSION		0x1
+#define SCSI_FIRMWARE_MINOR_VERSION		0x5
+#define BYTE_WRITE_SUPPORT			0x1
+#define FLASH_AUTO_INIT_BASE_ADDR		0xF00000
+#define FLASH_CONTIGIOUS_START_ADDR_AFTER_INIT	0x1C000000
+#define FLASH_CONTIGIOUS_START_ADDR_BEFORE_INIT	0x1F000000
+#define FLASH_CONTIGIOUS_START_ADDR_BCS350	0x08000000
+#define FLASH_CONTIGIOUS_END_ADDR_BCS350	0x08FFFFFF
+#define FLASH_SIZE_ADDR				0xFFFFEC
+#define FLASH_SPI_CMDQ_REG			0xAF003040
+#define FLASH_SPI_WRITEQ_REG			0xAF003044
+#define FLASH_SPI_READQ_REG			0xAF003048
+#define FLASH_CONFIG_REG			0xAF003050
+#define FLASH_GPIO_CONFIG_REG			0xAF000030
+#define FLASH_CMD_WRITE_ENABLE			0x06
+#define FLASH_CMD_READ_ENABLE			0x03
+#define FLASH_CMD_RESET_WRITE_ENABLE		0x04
+#define FLASH_CMD_STATUS_REG_READ		0x05
+#define FLASH_CMD_STATUS_REG_WRITE		0x01
+#define FLASH_CMD_READ_ID			0x9F
+#define PAD_SELECT_REGISTER			0xAF000410
+#define FLASH_PART_SST25VF080B			0xBF258E
+#define EEPROM_CAL_DATA_INTERNAL_LOC		0xbFB00008
+#define EEPROM_CALPARAM_START			0x200
+#define EEPROM_SIZE_OFFSET			524
 
 //As Read/Write time vaires from 1.5 to 3.0 ms.
 //so After Ignoring the rdm/wrm time(that is dependent on many factor like interface etc.),
 //here time calculated meets the worst case delay, 3.0 ms
-#define MAX_FLASH_RETRIES						 4
-#define FLASH_PER_RETRIES_DELAY			         16
-
-
-#define EEPROM_MAX_CAL_AREA_SIZE                 0xF0000
-
-
-
-#define BECM                                     ntohl(0x4245434d)
-
-#define FLASH_2X_MAJOR_NUMBER 0x2
-#define DSD_IMAGE_MAGIC_NUMBER 0xBECE0D5D
-#define ISO_IMAGE_MAGIC_NUMBER 0xBECE0150
-#define NON_CDLESS_DEVICE_BOOT_SIG 0xBECEB007
-#define MINOR_VERSION(x) ((x >>16) & 0xFFFF)
+#define MAX_FLASH_RETRIES		4
+#define FLASH_PER_RETRIES_DELAY		16
+#define EEPROM_MAX_CAL_AREA_SIZE	0xF0000
+#define BECM				ntohl(0x4245434d)
+#define FLASH_2X_MAJOR_NUMBER		0x2
+#define DSD_IMAGE_MAGIC_NUMBER		0xBECE0D5D
+#define ISO_IMAGE_MAGIC_NUMBER		0xBECE0150
+#define NON_CDLESS_DEVICE_BOOT_SIG	0xBECEB007
+
+#define MINOR_VERSION(x) ((x >> 16) & 0xFFFF)
 #define MAJOR_VERSION(x) (x & 0xFFFF)
-#define CORRUPTED_PATTERN 0x0
-#define UNINIT_PTR_IN_CS 0xBBBBDDDD
-
-#define VENDOR_PTR_IN_CS 0xAAAACCCC
-
-
-#define FLASH2X_SECTION_PRESENT 1<<0
-#define FLASH2X_SECTION_VALID 1<<1
-#define FLASH2X_SECTION_RO 1<<2
-#define FLASH2X_SECTION_ACT 1<<3
-#define SECTOR_IS_NOT_WRITABLE STATUS_FAILURE
-#define INVALID_OFFSET STATUS_FAILURE
-#define INVALID_SECTION STATUS_FAILURE
-#define SECTOR_1K 1024
-#define SECTOR_64K (64 *SECTOR_1K)
-#define SECTOR_128K (2 * SECTOR_64K)
-#define SECTOR_256k (2 * SECTOR_128K)
-#define SECTOR_512K (2 * SECTOR_256k)
-#define FLASH_PART_SIZE (16 * 1024 * 1024)
-#define RESET_CHIP_SELECT -1
-#define CHIP_SELECT_BIT12   12
-
-#define SECTOR_READWRITE_PERMISSION 0
-#define SECTOR_READONLY 1
-#define SIGNATURE_SIZE  4
-#define DEFAULT_BUFF_SIZE 0x10000
-
 
-#define FIELD_OFFSET_IN_HEADER(HeaderPointer,Field) ((PUCHAR)&((HeaderPointer)(NULL))->Field - (PUCHAR)(NULL))
+#define CORRUPTED_PATTERN		0x0
+#define UNINIT_PTR_IN_CS		0xBBBBDDDD
+#define VENDOR_PTR_IN_CS		0xAAAACCCC
+#define FLASH2X_SECTION_PRESENT		1 << 0
+#define FLASH2X_SECTION_VALID		1 << 1
+#define FLASH2X_SECTION_RO		1 << 2
+#define FLASH2X_SECTION_ACT		1 << 3
+#define SECTOR_IS_NOT_WRITABLE		STATUS_FAILURE
+#define INVALID_OFFSET			STATUS_FAILURE
+#define INVALID_SECTION			STATUS_FAILURE
+#define SECTOR_1K			1024
+#define SECTOR_64K			(64 * SECTOR_1K)
+#define SECTOR_128K			(2 * SECTOR_64K)
+#define SECTOR_256k			(2 * SECTOR_128K)
+#define SECTOR_512K			(2 * SECTOR_256k)
+#define FLASH_PART_SIZE			(16 * 1024 * 1024)
+#define RESET_CHIP_SELECT		-1
+#define CHIP_SELECT_BIT12		12
+#define SECTOR_READWRITE_PERMISSION	0
+#define SECTOR_READONLY			1
+#define SIGNATURE_SIZE			4
+#define DEFAULT_BUFF_SIZE		0x10000
+
+#define FIELD_OFFSET_IN_HEADER(HeaderPointer, Field) ((PUCHAR)&((HeaderPointer)(NULL))->Field - (PUCHAR)(NULL))
 
 #endif
 
-- 
1.7.9.5

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux