This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing through devpriv->s_EeParameters.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/addi_apci_2032.c | 28 +++++--------------------
1 file changed, 5 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c
index 57c5925..9b0c402 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2032.c
@@ -88,23 +88,6 @@ static int apci2032_auto_attach(struct comedi_device *dev,
return ret;
dev->iobase = pci_resource_start(pcidev, 1);
- /* Initialize parameters that can be overridden in EEPROM */
- devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
- devpriv->s_EeParameters.i_NbrAoChannel = this_board->i_NbrAoChannel;
- devpriv->s_EeParameters.i_AiMaxdata = this_board->i_AiMaxdata;
- devpriv->s_EeParameters.i_AoMaxdata = this_board->i_AoMaxdata;
- devpriv->s_EeParameters.i_NbrDiChannel = this_board->i_NbrDiChannel;
- devpriv->s_EeParameters.i_NbrDoChannel = this_board->i_NbrDoChannel;
- devpriv->s_EeParameters.i_DoMaxdata = this_board->i_DoMaxdata;
- devpriv->s_EeParameters.i_Dma = this_board->i_Dma;
- devpriv->s_EeParameters.i_Timer = this_board->i_Timer;
- devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
- this_board->ui_MinAcquisitiontimeNs;
- devpriv->s_EeParameters.ui_MinDelaytimeNs =
- this_board->ui_MinDelaytimeNs;
-
- /* ## */
-
if (pcidev->irq > 0) {
ret = request_irq(pcidev->irq, v_ADDI_Interrupt, IRQF_SHARED,
dev->board_name, dev);
@@ -131,14 +114,13 @@ static int apci2032_auto_attach(struct comedi_device *dev,
/* Allocate and Initialise DO Subdevice Structures */
s = &dev->subdevices[3];
- if (devpriv->s_EeParameters.i_NbrDoChannel) {
+ if (this_board->i_NbrDoChannel) {
s->type = COMEDI_SUBD_DO;
s->subdev_flags =
SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
- s->n_chan = devpriv->s_EeParameters.i_NbrDoChannel;
- s->maxdata = devpriv->s_EeParameters.i_DoMaxdata;
- s->len_chanlist =
- devpriv->s_EeParameters.i_NbrDoChannel;
+ s->n_chan = this_board->i_NbrDoChannel;
+ s->maxdata = this_board->i_DoMaxdata;
+ s->len_chanlist = this_board->i_NbrDoChannel;
s->range_table = &range_digital;
s->io_bits = 0xf; /* all bits output */
@@ -153,7 +135,7 @@ static int apci2032_auto_attach(struct comedi_device *dev,
/* Allocate and Initialise Timer Subdevice Structures */
s = &dev->subdevices[4];
- if (devpriv->s_EeParameters.i_Timer) {
+ if (this_board->i_Timer) {
s->type = COMEDI_SUBD_TIMER;
s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
s->n_chan = 1;
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
