Hi Laurent,
Em Wed, 28 Nov 2012 14:00:14 +0100
Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> escreveu:
> Hi Mauro,
>
> Please see below.
>
> On Wednesday 28 November 2012 09:22:13 Mauro Carvalho Chehab wrote:
> > Hi Prabhakar,
> >
> > Em Wed, 28 Nov 2012 16:12:09 +0530
> >
> > Prabhakar Lad <prabhakar.csengg@xxxxxxxxx> escreveu:
> > > +Introduction
> > > +============
> > > +
> > > + This file documents the Texas Instruments Davinci Video processing Front
> > > + End (VPFE) driver located under drivers/media/platform/davinci. The
> > > + original driver exists for Davinci VPFE, which is now being changed to
> > > + Media Controller Framework.
> >
> > Hmm... please correct me if I'm wrong, but are you wanting to replace an
> > existing driver at drivers/media/platform/davinci, by another one at
> > staging that has lots of known issues, as pointed at your TODO????
> >
> > If so, please don't do that. Replacing a driver by some other one is
> > generally a very bad idea, especially in this case, where the new driver
> > has clearly several issues, the main one being to define its own proprietary
> > and undocumented API:
> >
> > > +As of now since the interface will undergo few changes all the include
> > > +files are present in staging itself, to build for dm365 follow below
> > > +steps,
> > > +
> > > +- copy vpfe.h from drivers/staging/media/davinci_vpfe/ to
> > > + include/media/davinci/ folder for building the uImage.
> > > +- copy davinci_vpfe_user.h from drivers/staging/media/davinci_vpfe/ to
> > > + include/uapi/linux/davinci_vpfe.h, and add a entry in Kbuild (required
> > > + for building application).
> > > +- copy dm365_ipipeif_user.h from drivers/staging/media/davinci_vpfe/ to
> > > + include/uapi/linux/dm365_ipipeif.h and a entry in Kbuild (required
> > > + for building application).
> >
> > Among other things, with those ugly and very likely mandatory API calls:
> >
> > >+/*
> > >+ * Private IOCTL
> > >+ * VIDIOC_VPFE_IPIPEIF_S_CONFIG: Set IPIEIF configuration
> > >+ * VIDIOC_VPFE_IPIPEIF_G_CONFIG: Get IPIEIF configuration
> > >+ */
> > >+#define VIDIOC_VPFE_IPIPEIF_S_CONFIG \
> > >+ _IOWR('I', BASE_VIDIOC_PRIVATE + 1, struct ipipeif_params)
> > >+#define VIDIOC_VPFE_IPIPEIF_G_CONFIG \
> > >+ _IOWR('I', BASE_VIDIOC_PRIVATE + 2, struct ipipeif_params)
> > >+
> > >+#endif
> >
> > I remember we rejected already drivers like that with obscure "S_CONFIG"
> > private ioctl that were suspect to send a big initialization undocumented
> > blob to the driver, as only the vendor's application would be able to use
> > such driver.
>
> That's correct, and that's why the driver is going to staging. From there it
> will be incrementally fixed and then moved to drivers/media/, or dropped if
> not maintained.
>
> > So, instead, of submitting it to staging, you should be sending incremental
> > patches for the existing driver, adding newer functionality there, and
> > using the proper V4L2 API, with makes life easier for reviewers and
> > application developers.
>
> I agree that it would be the best thing to do, but I don't think it's going to
> happen. We need to decide between two options.
>
> - Push back now and insist in incremental patches for the existing driver, and
> get nothing back as TI will very likely give up completely.
> - Accept the driver in staging, get it fixed incrementally, and finally move
> it to drivers/media/
>
> There's a political side to this issue, we need to decide whether we want to
> insist vendors getting everything right before any code reaches mainline, in
> which case I believe we will lose some of them in the process, including major
> vendors such as TI, or if we can make the mainline learning curve and
> experience a bit more smooth by accepting such code in staging.
>
> I would vote for the second option, with a very clear rule that getting the
> driver in staging is only one step in the journey: if the development effort
> stops there, the driver *will* be removed.
What concerns most is that we'll be adding yet-another-driver for the same
hardware, but using a different API set (Media controller + subdevs, instead
of pure V4L2).
It should be noticed that even basic stuff seems to be missing at the driver,
like proper locks[1].
[1] I'm basing my comments only at this patchset's TODO list - I didn't
reviewed the code, but it this is one of the listed items: "Check proper
serialisation (through mutexes and spinlocks)"
As no regressions are accepted, on non-staging drivers, the switch from the
already working, stable one to the new one, when this driver reaches the
required quality, will be a very hard task, as one would need to check the
exact behavior of the existing driver, and check if the new driver will
behave the same, in order to warrant that no regressions will be introduced.
This doesn't sound something easy to do, especially if the implementation
decisions taken on the second driver aren't based on the same way as the
existing driver.
The risk is that this driver would never be merged upstream, due to those
conflicts, or that we'll take several years to solve it, before being
able to warrant that userspace binaries developed for the first driver
will work as-is with the new one.
Regards,
Mauro
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
