This patch fixes all white space issues in Ioctl.h as reported by checkpatch.pl. Signed-off-by: Kevin McKinney <klmckinney1@xxxxxxxxx> --- drivers/staging/bcm/Ioctl.h | 290 ++++++++++++++++--------------------------- 1 file changed, 106 insertions(+), 184 deletions(-) diff --git a/drivers/staging/bcm/Ioctl.h b/drivers/staging/bcm/Ioctl.h index f859cf1..8d89c34 100644 --- a/drivers/staging/bcm/Ioctl.h +++ b/drivers/staging/bcm/Ioctl.h @@ -3,233 +3,161 @@ typedef struct rdmbuffer { - ULONG Register; - ULONG Length; -}__attribute__((packed)) RDM_BUFFER, *PRDM_BUFFER; - + ULONG Register; + ULONG Length; +} __attribute__((packed)) RDM_BUFFER, *PRDM_BUFFER; typedef struct wrmbuffer { - ULONG Register; - ULONG Length; - UCHAR Data[4]; -}__attribute__((packed)) WRM_BUFFER, *PWRM_BUFFER; - + ULONG Register; + ULONG Length; + UCHAR Data[4]; +} __attribute__((packed)) WRM_BUFFER, *PWRM_BUFFER; typedef struct ioctlbuffer { void __user *InputBuffer; - ULONG InputLength; + ULONG InputLength; void __user *OutputBuffer; - ULONG OutputLength; -}__attribute__((packed)) IOCTL_BUFFER, *PIOCTL_BUFFER; + ULONG OutputLength; +} __attribute__((packed)) IOCTL_BUFFER, *PIOCTL_BUFFER; typedef struct stGPIOInfo { - UINT uiGpioNumber ; /* valid numbers 0-15 */ + UINT uiGpioNumber; /* valid numbers 0-15 */ UINT uiGpioValue; /* 1 set ; 0 not set */ -}__attribute__((packed))GPIO_INFO,*PGPIO_INFO; +} __attribute__((packed))GPIO_INFO, *PGPIO_INFO; + typedef struct stUserThreadReq { //0->Inactivate LED thread. //1->Activate the LED thread UINT ThreadState; -}__attribute__((packed))USER_THREAD_REQ,*PUSER_THREAD_REQ; +} __attribute__((packed))USER_THREAD_REQ, *PUSER_THREAD_REQ; #define LED_THREAD_ACTIVATION_REQ 1 - ////********** ioctl codes ***********//// -#define BCM_IOCTL 'k' - +#define BCM_IOCTL 'k' //1.Control code for CONTROL MESSAGES - -#define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801,int) - +#define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801, int) //2.Control code to write a particular value to a particular register -#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int) // - +#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int) // //3. -#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int) // - +#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int) // //4.Control code to write x number of bytes to common memory //starting from address y -#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)// - +#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)// //5.Control code to write x number of bytes to common memory //starting from address y -#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)// - +#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)// //6.Control code for CONTROL MESSAGES -#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)// - +#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)// //7.Control code for FIRMWARE DOWNLOAD -#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)// - -#define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int) - +#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)// +#define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int) //9.Control code for TRANSFER MODE SWITCHING -#define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int) +#define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int) //10.Control code for LINK UP -#define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int) - +#define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int) //11.Control code for RSSI Level Request -#define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int) +#define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int) //12.Control code for IDLE MODE CONTROL -#define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int) +#define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int) //13.Control code for SS/BS info -#define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int) - +#define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int) #define IOCTL_GET_STATISTICS_POINTER _IOW(BCM_IOCTL, 0x80E, int) - -#define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int) - -#define IOCTL_INIT_PARAM_REQ _IOW(BCM_IOCTL, 0x810, int) - -#define IOCTL_MAC_ADDR_REQ _IOW(BCM_IOCTL, 0x811, int) - -#define IOCTL_MAC_ADDR_RESP _IOWR(BCM_IOCTL, 0x812, int) - -#define IOCTL_CLASSIFICATION_RULE _IOW(BCM_IOCTL, 0x813, char) - +#define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int) +#define IOCTL_INIT_PARAM_REQ _IOW(BCM_IOCTL, 0x810, int) +#define IOCTL_MAC_ADDR_REQ _IOW(BCM_IOCTL, 0x811, int) +#define IOCTL_MAC_ADDR_RESP _IOWR(BCM_IOCTL, 0x812, int) +#define IOCTL_CLASSIFICATION_RULE _IOW(BCM_IOCTL, 0x813, char) #define IOCTL_CLOSE_NOTIFICATION _IO(BCM_IOCTL, 0x814) - -#define IOCTL_LINK_UP _IO(BCM_IOCTL, 0x815) - -#define IOCTL_LINK_DOWN _IO(BCM_IOCTL, 0x816, IOCTL_BUFFER) - -#define IOCTL_CHIP_RESET _IO(BCM_IOCTL, 0x816) - +#define IOCTL_LINK_UP _IO(BCM_IOCTL, 0x815) +#define IOCTL_LINK_DOWN _IO(BCM_IOCTL, 0x816, IOCTL_BUFFER) +#define IOCTL_CHIP_RESET _IO(BCM_IOCTL, 0x816) #define IOCTL_CINR_LEVEL_REQ _IOW(BCM_IOCTL, 0x817, char) - -#define IOCTL_WTM_CONTROL_REQ _IOW(BCM_IOCTL, 0x817,char) - +#define IOCTL_WTM_CONTROL_REQ _IOW(BCM_IOCTL, 0x817, char) #define IOCTL_BE_BUCKET_SIZE _IOW(BCM_IOCTL, 0x818, unsigned long) - #define IOCTL_RTPS_BUCKET_SIZE _IOW(BCM_IOCTL, 0x819, unsigned long) - -#define IOCTL_QOS_THRESHOLD _IOW(BCM_IOCTL, 0x820, unsigned long) - -#define IOCTL_DUMP_PACKET_INFO _IO(BCM_IOCTL, 0x821) - -#define IOCTL_GET_PACK_INFO _IOR(BCM_IOCTL, 0x823, int) - +#define IOCTL_QOS_THRESHOLD _IOW(BCM_IOCTL, 0x820, unsigned long) +#define IOCTL_DUMP_PACKET_INFO _IO(BCM_IOCTL, 0x821) +#define IOCTL_GET_PACK_INFO _IOR(BCM_IOCTL, 0x823, int) #define IOCTL_BCM_GET_DRIVER_VERSION _IOR(BCM_IOCTL, 0x829, int) - -#define IOCTL_BCM_GET_CURRENT_STATUS _IOW(BCM_IOCTL, 0x828, int) - -#define IOCTL_BCM_GPIO_SET_REQUEST _IOW(BCM_IOCTL, 0x82A, int) - -#define IOCTL_BCM_GPIO_STATUS_REQUEST _IOW(BCM_IOCTL, 0x82b, int) - -#define IOCTL_BCM_GET_DSX_INDICATION _IOR(BCM_IOCTL, 0x854, int) - -#define IOCTL_BCM_BUFFER_DOWNLOAD_START _IOW(BCM_IOCTL, 0x855, int) - -#define IOCTL_BCM_BUFFER_DOWNLOAD _IOW(BCM_IOCTL, 0x856, int) - -#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP _IOW(BCM_IOCTL, 0x857, int) - -#define IOCTL_BCM_REGISTER_WRITE_PRIVATE _IOW(BCM_IOCTL, 0x826, char) - +#define IOCTL_BCM_GET_CURRENT_STATUS _IOW(BCM_IOCTL, 0x828, int) +#define IOCTL_BCM_GPIO_SET_REQUEST _IOW(BCM_IOCTL, 0x82A, int) +#define IOCTL_BCM_GPIO_STATUS_REQUEST _IOW(BCM_IOCTL, 0x82b, int) +#define IOCTL_BCM_GET_DSX_INDICATION _IOR(BCM_IOCTL, 0x854, int) +#define IOCTL_BCM_BUFFER_DOWNLOAD_START _IOW(BCM_IOCTL, 0x855, int) +#define IOCTL_BCM_BUFFER_DOWNLOAD _IOW(BCM_IOCTL, 0x856, int) +#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP _IOW(BCM_IOCTL, 0x857, int) +#define IOCTL_BCM_REGISTER_WRITE_PRIVATE _IOW(BCM_IOCTL, 0x826, char) #define IOCTL_BCM_REGISTER_READ_PRIVATE _IOW(BCM_IOCTL, 0x827, char) - -#define IOCTL_BCM_SET_DEBUG _IOW(BCM_IOCTL, 0x824, IOCTL_BUFFER) - -#define IOCTL_BCM_EEPROM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x858, int) - -#define IOCTL_BCM_EEPROM_REGISTER_READ _IOR(BCM_IOCTL, 0x859, int) - +#define IOCTL_BCM_SET_DEBUG _IOW(BCM_IOCTL, 0x824, IOCTL_BUFFER) +#define IOCTL_BCM_EEPROM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x858, int) +#define IOCTL_BCM_EEPROM_REGISTER_READ _IOR(BCM_IOCTL, 0x859, int) #define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE _IOR(BCM_IOCTL, 0x860, int) - -#define IOCTL_BCM_SET_MAC_TRACING _IOW(BCM_IOCTL, 0x82c, int) - -#define IOCTL_BCM_GET_HOST_MIBS _IOW(BCM_IOCTL, 0x853, int) - -#define IOCTL_BCM_NVM_READ _IOR(BCM_IOCTL, 0x861, int) - -#define IOCTL_BCM_NVM_WRITE _IOW(BCM_IOCTL, 0x862, int) - -#define IOCTL_BCM_GET_NVM_SIZE _IOR(BCM_IOCTL, 0x863, int) - -#define IOCTL_BCM_CAL_INIT _IOR(BCM_IOCTL, 0x864, int) - -#define IOCTL_BCM_BULK_WRM _IOW(BCM_IOCTL, 0x90B, int) - -#define IOCTL_BCM_FLASH2X_SECTION_READ _IOR(BCM_IOCTL, 0x865, int) - +#define IOCTL_BCM_SET_MAC_TRACING _IOW(BCM_IOCTL, 0x82c, int) +#define IOCTL_BCM_GET_HOST_MIBS _IOW(BCM_IOCTL, 0x853, int) +#define IOCTL_BCM_NVM_READ _IOR(BCM_IOCTL, 0x861, int) +#define IOCTL_BCM_NVM_WRITE _IOW(BCM_IOCTL, 0x862, int) +#define IOCTL_BCM_GET_NVM_SIZE _IOR(BCM_IOCTL, 0x863, int) +#define IOCTL_BCM_CAL_INIT _IOR(BCM_IOCTL, 0x864, int) +#define IOCTL_BCM_BULK_WRM _IOW(BCM_IOCTL, 0x90B, int) +#define IOCTL_BCM_FLASH2X_SECTION_READ _IOR(BCM_IOCTL, 0x865, int) #define IOCTL_BCM_FLASH2X_SECTION_WRITE _IOW(BCM_IOCTL, 0x866, int) - -#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL,0x867, int) - -#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL,0x868, int) - -#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL,0x869) - -#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870,int) - -#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int) - -#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int) - -#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int) - -#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int) - -#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO _IOR(BCM_IOCTL, 0x877, int) - -#define IOCTL_BCM_TIME_SINCE_NET_ENTRY _IOR(BCM_IOCTL, 0x876, int) - -#define BCM_LED_THREAD_STATE_CHANGE_REQ _IOW(BCM_IOCTL, 0x878, int) - +#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL, 0x867, int) +#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL, 0x868, int) +#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL, 0x869) +#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870, int) +#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int) +#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int) +#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int) +#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int) +#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO _IOR(BCM_IOCTL, 0x877, int) +#define IOCTL_BCM_TIME_SINCE_NET_ENTRY _IOR(BCM_IOCTL, 0x876, int) +#define BCM_LED_THREAD_STATE_CHANGE_REQ _IOW(BCM_IOCTL, 0x878, int) #define IOCTL_BCM_GPIO_MULTI_REQUEST _IOW(BCM_IOCTL, 0x82D, IOCTL_BUFFER) -#define IOCTL_BCM_GPIO_MODE_REQUEST _IOW(BCM_IOCTL, 0x82E, IOCTL_BUFFER) - - +#define IOCTL_BCM_GPIO_MODE_REQUEST _IOW(BCM_IOCTL, 0x82E, IOCTL_BUFFER) typedef enum _BCM_INTERFACE_TYPE { - BCM_MII, - BCM_CARDBUS, - BCM_USB, - BCM_SDIO, - BCM_PCMCIA -}BCM_INTERFACE_TYPE; + BCM_MII, + BCM_CARDBUS, + BCM_USB, + BCM_SDIO, + BCM_PCMCIA +} BCM_INTERFACE_TYPE; typedef struct _DEVICE_DRIVER_INFO { - NVM_TYPE u32NVMType; - UINT MaxRDMBufferSize; - BCM_INTERFACE_TYPE u32InterfaceType; - UINT u32DSDStartOffset; - UINT u32RxAlignmentCorrection; - UINT u32Reserved[10]; + NVM_TYPE u32NVMType; + UINT MaxRDMBufferSize; + BCM_INTERFACE_TYPE u32InterfaceType; + UINT u32DSDStartOffset; + UINT u32RxAlignmentCorrection; + UINT u32Reserved[10]; } DEVICE_DRIVER_INFO; typedef struct _NVM_READWRITE { - void __user *pBuffer; // Data to be written from|read to. Memory should be allocated by the caller. - uint32_t uiOffset; // offset at which data should be written to or read from. - - uint32_t uiNumBytes; + uint32_t uiNumBytes; // No. of bytes to be written or read. - - bool bVerify; + bool bVerify; // Applicable only for write. If set verification of written data will be done. +} NVM_READWRITE, *PNVM_READWRITE; -} NVM_READWRITE,*PNVM_READWRITE; typedef struct bulkwrmbuffer { - ULONG Register; - ULONG SwapEndian; - ULONG Values[1]; - -}BULKWRM_BUFFER,*PBULKWRM_BUFFER; + ULONG Register; + ULONG SwapEndian; + ULONG Values[1]; +} BULKWRM_BUFFER, *PBULKWRM_BUFFER; /***********Structure used for FlashMap2.x *******************************/ @@ -257,21 +185,19 @@ typedef enum _FLASH2X_SECTION_VAL ISO_IMAGE2_PART2, ISO_IMAGE2_PART3, TOTAL_SECTIONS -}FLASH2X_SECTION_VAL; +} FLASH2X_SECTION_VAL; /* * Structure used for READ/WRITE Flash Map2.x */ typedef struct _FLASH2X_READWRITE { - FLASH2X_SECTION_VAL Section; //which section has to be read/written B_UINT32 offset; //Offset within Section. B_UINT32 numOfBytes; //NOB from the offset B_UINT32 bVerify; void __user *pDataBuff; //Buffer for reading/writing - -}FLASH2X_READWRITE, *PFLASH2X_READWRITE; +} FLASH2X_READWRITE, *PFLASH2X_READWRITE; /* * This structure is used for coping one section to other. * there are two ways to copy one section to other. @@ -283,18 +209,14 @@ typedef struct _FLASH2X_COPY_SECTION { //Src Section from which Data has to be copied to DstSection FLASH2X_SECTION_VAL SrcSection; - //Destination Section from where Data has to be coppied. FLASH2X_SECTION_VAL DstSection; - //Offset within Section. if NOB =0 it will be ignored and data will be coped from offset 0. B_UINT32 offset; - //NOB from the offset. if NOB = 0 complete src section will be copied to Destination section. B_UINT32 numOfBytes; } FLASH2X_COPY_SECTION, *PFLASH2X_COPY_SECTION; - typedef enum _SECTION_TYPE { ISO = 0, @@ -329,32 +251,32 @@ typedef struct _FLASH2X_BITMAP UCHAR Reserved0; UCHAR Reserved1; UCHAR Reserved2; -}FLASH2X_BITMAP, *PFLASH2X_BITMAP; +} FLASH2X_BITMAP, *PFLASH2X_BITMAP; //for net entry time check typedef struct _ST_TIME_ELAPSED_ { ULONG64 ul64TimeElapsedSinceNetEntry; - UINT32 uiReserved[4]; //By chance if required for future proofing -}ST_TIME_ELAPSED,*PST_TIME_ELAPSED; + UINT32 uiReserved[4]; //By chance if required for future proofing +} ST_TIME_ELAPSED, *PST_TIME_ELAPSED; enum { - WIMAX_IDX=0, /*To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/ - HOST_IDX, /*To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/ - MAX_IDX + WIMAX_IDX = 0, /*To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/ + HOST_IDX, /*To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/ + MAX_IDX }; + typedef struct stGPIOMultiInfo { - UINT uiGPIOCommand; /* 1 for set and 0 for get*/ - UINT uiGPIOMask; /* set the correspondig bit to 1 to access GPIO*/ - UINT uiGPIOValue; /* 0 or 1; value to be set when command is 1.*/ -}__attribute__((packed))GPIO_MULTI_INFO , *PGPIO_MULTI_INFO; + UINT uiGPIOCommand; /* 1 for set and 0 for get*/ + UINT uiGPIOMask; /* set the correspondig bit to 1 to access GPIO*/ + UINT uiGPIOValue; /* 0 or 1; value to be set when command is 1.*/ +} __attribute__((packed))GPIO_MULTI_INFO, *PGPIO_MULTI_INFO; typedef struct stGPIOMultiMode { - UINT uiGPIOMode; /* 1 for OUT mode, 0 for IN mode*/ - UINT uiGPIOMask; /* GPIO mask to set mode*/ -}__attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE; - + UINT uiGPIOMode; /* 1 for OUT mode, 0 for IN mode*/ + UINT uiGPIOMask; /* GPIO mask to set mode*/ +} __attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE; #endif -- 1.7.9.5 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel