This commit fixes incorrect brace placement as reported by the
checkpatch.pl tool.
Signed-off-by: Johan Meiring <johanmeiring@xxxxxxxxx>
---
drivers/staging/cxt1e1/musycc.c | 314 +++++++++++----------------------------
1 file changed, 90 insertions(+), 224 deletions(-)
diff --git a/drivers/staging/cxt1e1/musycc.c b/drivers/staging/cxt1e1/musycc.c
index 5feac8a..42e1ca4 100644
--- a/drivers/staging/cxt1e1/musycc.c
+++ b/drivers/staging/cxt1e1/musycc.c
@@ -83,18 +83,13 @@ musycc_dump_rxbuffer_ring (mch_t * ch, int lockit)
int n;
if (lockit)
- {
spin_lock_irqsave (&ch->ch_rxlock, flags);
- }
if (ch->rxd_num == 0)
- {
pr_info(" ZERO receive buffers allocated for this channel.");
- } else
- {
+ else {
FLUSH_MEM_READ ();
m = &ch->mdr[ch->rxix_irq_srv];
- for (n = ch->rxd_num; n; n--)
- {
+ for (n = ch->rxd_num; n; n--) {
status = le32_to_cpu (m->status);
{
pr_info("%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
@@ -138,9 +133,7 @@ musycc_dump_rxbuffer_ring (mch_t * ch, int lockit)
pr_info("\n");
if (lockit)
- {
spin_unlock_irqrestore (&ch->ch_rxlock, flags);
- }
return 0;
}
#endif
@@ -155,18 +148,13 @@ musycc_dump_txbuffer_ring (mch_t * ch, int lockit)
int n;
if (lockit)
- {
spin_lock_irqsave (&ch->ch_txlock, flags);
- }
if (ch->txd_num == 0)
- {
pr_info(" ZERO transmit buffers allocated for this channel.");
- } else
- {
+ else {
FLUSH_MEM_READ ();
m = ch->txd_irq_srv;
- for (n = ch->txd_num; n; n--)
- {
+ for (n = ch->txd_num; n; n--) {
status = le32_to_cpu (m->status);
{
pr_info("%c%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
@@ -185,8 +173,7 @@ musycc_dump_txbuffer_ring (mch_t * ch, int lockit)
u_int32_t *dp;
int len = status & LENGTH_MASK;
- if (m->data)
- {
+ if (m->data) {
dp = (u_int32_t *) OS_phystov ((void *) (le32_to_cpu (m->data)));
if (len >= 0x10)
pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
@@ -206,9 +193,7 @@ musycc_dump_txbuffer_ring (mch_t * ch, int lockit)
pr_info("\n");
if (lockit)
- {
spin_unlock_irqrestore (&ch->ch_txlock, flags);
- }
return 0;
}
#endif
@@ -225,9 +210,7 @@ musycc_dump_ring (ci_t * ci, unsigned int chan)
mch_t *ch;
if (chan >= MAX_CHANS_USED)
- {
return SBE_DRVR_FAIL; /* E2BIG */
- }
{
int bh;
@@ -241,8 +224,7 @@ musycc_dump_ring (ci_t * ci, unsigned int chan)
max_intcnt = 0; /* reset counter */
}
- if (!(ch = sd_find_chan (dummy, chan)))
- {
+ if (!(ch = sd_find_chan (dummy, chan))) {
pr_info(">> musycc_dump_ring: channel %d not up.\n", chan);
return ENOENT;
}
@@ -299,9 +281,7 @@ musycc_init_mdt (mpi_t * pi)
cfg = CFG_CH_FLAG_7E << IDLE_CODE;
for (i = 0; i < 32; addr++, i++)
- {
pci_write_32 (addr, cfg);
- }
}
@@ -314,18 +294,15 @@ musycc_update_tx_thp (mch_t * ch)
unsigned long flags;
spin_lock_irqsave (&ch->ch_txlock, flags);
- while (1)
- {
+ while (1) {
md = ch->txd_irq_srv;
FLUSH_MEM_READ ();
- if (!md->data)
- {
+ if (!md->data) {
/* No MDs with buffers to process */
spin_unlock_irqrestore (&ch->ch_txlock, flags);
return;
}
- if ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED)
- {
+ if ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED) {
/* this is the MD to restart TX with */
break;
}
@@ -341,8 +318,7 @@ musycc_update_tx_thp (mch_t * ch)
ch->up->regram->thp[ch->gchan] = cpu_to_le32 (OS_vtophys (md));
FLUSH_MEM_WRITE ();
- if (ch->tx_full)
- {
+ if (ch->tx_full) {
ch->tx_full = 0;
ch->txd_required = 0;
sd_enable_xmit (ch->user); /* re-enable to catch flow controlled
@@ -388,16 +364,14 @@ musycc_wq_chan_restart (void *arg) /* channel private structure */
/** check for RX restart request **/
/**********************************/
- if ((ch->ch_start_rx) && (ch->status & RX_ENABLED))
- {
+ if ((ch->ch_start_rx) && (ch->status & RX_ENABLED)) {
ch->ch_start_rx = 0;
#if defined(RLD_TRANS_DEBUG) || defined(RLD_RXACT_DEBUG)
{
static int hereb4 = 7;
- if (hereb4) /* RLD DEBUG */
- {
+ if (hereb4) { /* RLD DEBUG */
hereb4--;
#ifdef RLD_TRANS_DEBUG
md = &ch->mdr[ch->rxix_irq_srv];
@@ -420,8 +394,7 @@ musycc_wq_chan_restart (void *arg) /* channel private structure */
/** check for TX restart request **/
/**********************************/
- if ((ch->ch_start_tx) && (ch->status & TX_ENABLED))
- {
+ if ((ch->ch_start_tx) && (ch->status & TX_ENABLED)) {
/* find next unprocessed message, then set TX thp to it */
musycc_update_tx_thp (ch);
@@ -429,16 +402,14 @@ musycc_wq_chan_restart (void *arg) /* channel private structure */
spin_lock_irqsave (&ch->ch_txlock, flags);
#endif
md = ch->txd_irq_srv;
- if (!md)
- {
+ if (!md) {
#ifdef RLD_TRANS_DEBUG
pr_info("-- musycc_wq_chan_restart[%d]: WARNING, starting NULL md\n", ch->channum);
#endif
#if 0
spin_unlock_irqrestore (&ch->ch_txlock, flags);
#endif
- } else if (md->data && ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED))
- {
+ } else if (md->data && ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED)) {
ch->ch_start_tx = 0;
#if 0
spin_unlock_irqrestore (&ch->ch_txlock, flags); /* allow interrupts for service request */
@@ -450,8 +421,7 @@ musycc_wq_chan_restart (void *arg) /* channel private structure */
musycc_serv_req (pi, SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION | ch->gchan);
}
#ifdef RLD_RESTART_DEBUG
- else
- {
+ else {
/* retain request to start until retried and we have data to xmit */
pr_info("-- musycc_wq_chan_restart[%d]: DELAYED due to md %p sts %x data %x, start_tx %x\n",
ch->channum, md,
@@ -523,8 +493,7 @@ musycc_serv_req (mpi_t * pi, u_int32_t req)
SD_SEM_TAKE (&pi->sr_sem_busy, "serv"); /* only 1 thru here, per
* group */
- if (pi->sr_last == req)
- {
+ if (pi->sr_last == req) {
#ifdef RLD_TRANS_DEBUG
pr_info(">> same SR, Port %d Req %x\n", pi->portnum, req);
#endif
@@ -539,8 +508,7 @@ musycc_serv_req (mpi_t * pi, u_int32_t req)
r = (pi->sr_last & ~SR_GCHANNEL_MASK);
if ((r == (SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION)) ||
- (r == (SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION)))
- {
+ (r == (SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION))) {
#ifdef RLD_TRANS_DEBUG
pr_info(">> same CHAN ACT SR, Port %d Req %x => issue SR_NOOP CMD\n", pi->portnum, req);
#endif
@@ -548,8 +516,7 @@ musycc_serv_req (mpi_t * pi, u_int32_t req)
musycc_serv_req (pi, SR_NOOP);
SD_SEM_TAKE (&pi->sr_sem_busy, "serv"); /* relock & continue w/
* original req */
- } else if (req == SR_NOOP)
- {
+ } else if (req == SR_NOOP) {
/* no need to issue back-to-back SR_NOOP commands at this time */
#ifdef RLD_TRANS_DEBUG
pr_info(">> same Port SR_NOOP skipped, Port %d\n", pi->portnum);
@@ -576,8 +543,7 @@ rewrite:
* timing imposition */
- if ((r != req) && (req != SR_CHIP_RESET) && (++rcnt <= MUSYCC_SR_RETRY_CNT))
- {
+ if ((r != req) && (req != SR_CHIP_RESET) && (++rcnt <= MUSYCC_SR_RETRY_CNT)) {
if (cxt1e1_log_level >= LOG_MONITOR)
pr_info("%s: %d - reissue srv req/last %x/%x (hdw reads %x), Chan %d.\n",
pi->up->devname, rcnt, req, pi->sr_last, r,
@@ -586,15 +552,13 @@ rewrite:
* (reason not yet researched) */
goto rewrite;
}
- if (rcnt > MUSYCC_SR_RETRY_CNT)
- {
+ if (rcnt > MUSYCC_SR_RETRY_CNT) {
pr_warning("%s: failed service request (#%d)= %x, group %d.\n",
pi->up->devname, MUSYCC_SR_RETRY_CNT, req, pi->portnum);
SD_SEM_GIVE (&pi->sr_sem_busy); /* allow any next request */
return;
}
- if (req == SR_CHIP_RESET)
- {
+ if (req == SR_CHIP_RESET) {
/*
* PORT NOTE: the CHIP_RESET command is NOT ack'd by the MUSYCC, thus
* the upcoming delay is used. Though the MUSYCC documentation
@@ -603,8 +567,7 @@ rewrite:
* suggesting this 'lack of ACK' workaround. Thus the use of uwait.
*/
OS_uwait (100000, "icard"); /* 100ms */
- } else
- {
+ } else {
FLUSH_MEM_READ ();
SD_SEM_TAKE (&pi->sr_sem_wait, "sakack"); /* sleep until SACK
* interrupt occurs */
@@ -620,8 +583,7 @@ musycc_update_timeslots (mpi_t * pi)
int i, ch;
char e1mode = IS_FRAME_ANY_E1 (pi->p.port_mode);
- for (i = 0; i < 32; i++)
- {
+ for (i = 0; i < 32; i++) {
int usedby = 0, last = 0, ts, j, bits[8];
u_int8_t lastval = 0;
@@ -629,18 +591,13 @@ musycc_update_timeslots (mpi_t * pi)
if (((i == 0) && e1mode) || /* disable if E1 mode */
((i == 16) && ((pi->p.port_mode == CFG_FRAME_E1CRC_CAS) || (pi->p.port_mode == CFG_FRAME_E1CRC_CAS_AMI)))
|| ((i > 23) && (!e1mode))) /* disable if T1 mode */
- {
pi->tsm[i] = 0xff; /* make tslot unavailable for this mode */
- } else
- {
+ else
pi->tsm[i] = 0x00; /* make tslot available for assignment */
- }
for (j = 0; j < 8; j++)
bits[j] = -1;
- for (ch = 0; ch < MUSYCC_NCHANS; ch++)
- {
- if ((pi->chan[ch]->state == UP) && (pi->chan[ch]->p.bitmask[i]))
- {
+ for (ch = 0; ch < MUSYCC_NCHANS; ch++) {
+ if ((pi->chan[ch]->state == UP) && (pi->chan[ch]->p.bitmask[i])) {
usedby++;
last = ch;
lastval = pi->chan[ch]->p.bitmask[i];
@@ -656,16 +613,14 @@ musycc_update_timeslots (mpi_t * pi)
ts = (4 << 5) | last;
else if ((usedby == 1) && (lastval == 0x7f))
ts = (5 << 5) | last;
- else
- {
+ else {
int idx;
if (bits[0] < 0)
ts = (6 << 5) | (idx = last);
else
ts = (7 << 5) | (idx = bits[0]);
- for (j = 1; j < 8; j++)
- {
+ for (j = 1; j < 8; j++) {
pi->regram->rscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
pi->regram->tscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
}
@@ -699,8 +654,7 @@ musycc_update_timeslots (mpi_t * pi)
#ifdef SBE_WAN256T3_ENABLE
hmask = (0x1f << hyperdummy) & 0x1f;
#endif
- for (i = 0; i < 128; i++)
- {
+ for (i = 0; i < 128; i++) {
gchan = ((pi->portnum * MUSYCC_NCHANS) + (i & hmask)) % MUSYCC_NCHANS;
ch = pi->chan[gchan];
if (ch->p.mode_56k)
@@ -727,8 +681,7 @@ musycc_chan_proto (int proto)
{
int reg;
- switch (proto)
- {
+ switch (proto) {
case CFG_CH_PROTO_TRANS: /* 0 */
reg = MUSYCC_CCD_TRANS;
break;
@@ -807,12 +760,9 @@ musycc_init (ci_t * ci)
* closest boundary */
for (i = 0; i < INT_QUEUE_SIZE; i++)
- {
ci->iqd_p[i] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY);
- }
- for (i = 0; i < ci->max_port; i++)
- {
+ for (i = 0; i < ci->max_port; i++) {
mpi_t *pi = &ci->port[i];
/*
@@ -823,10 +773,8 @@ musycc_init (ci_t * ci)
#define GROUP_BOUNDARY 0x800
regaddr = OS_kmalloc (sizeof (struct musycc_groupr) + GROUP_BOUNDARY);
- if (regaddr == 0)
- {
- for (gchan = 0; gchan < i; gchan++)
- {
+ if (regaddr == 0) {
+ for (gchan = 0; gchan < i; gchan++) {
pi = &ci->port[gchan];
OS_kfree (pi->reg);
pi->reg = 0;
@@ -864,14 +812,12 @@ musycc_init (ci_t * ci)
/* sanity check settable parameters */
- if (cxt1e1_max_mru > 0xffe)
- {
+ if (cxt1e1_max_mru > 0xffe) {
pr_warning("Maximum allowed MRU exceeded, resetting %d to %d.\n",
cxt1e1_max_mru, 0xffe);
cxt1e1_max_mru = 0xffe;
}
- if (cxt1e1_max_mtu > 0xffe)
- {
+ if (cxt1e1_max_mtu > 0xffe) {
pr_warning("Maximum allowed MTU exceeded, resetting %d to %d.\n",
cxt1e1_max_mtu, 0xffe);
cxt1e1_max_mtu = 0xffe;
@@ -900,8 +846,7 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
volatile u_int32_t status;
ch = pi->chan[gchan];
- if (ch == 0 || ch->state != UP)
- {
+ if (ch == 0 || ch->state != UP) {
if (cxt1e1_log_level >= LOG_ERROR)
pr_info("%s: intr: xmit EOM on uninitialized channel %d\n",
pi->up->devname, gchan);
@@ -917,8 +862,7 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
spin_lock_irqsave (&ch->ch_txlock, flags);
#endif
#endif
- do
- {
+ do {
FLUSH_MEM_READ ();
md = ch->txd_irq_srv;
status = le32_to_cpu (md->status);
@@ -927,8 +871,7 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
* Note: Per MUSYCC Ref 6.4.9, the host does not poll a host-owned
* Transmit Buffer Descriptor during Transparent Mode.
*/
- if (status & MUSYCC_TX_OWNED)
- {
+ if (status & MUSYCC_TX_OWNED) {
int readCount, loopCount;
/***********************************************************/
@@ -941,8 +884,7 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
/***********************************************************/
readCount = 0;
- while (status & MUSYCC_TX_OWNED)
- {
+ while (status & MUSYCC_TX_OWNED) {
for (loopCount = 0; loopCount < 0x30; loopCount++)
OS_uwait_dummy (); /* use call to avoid optimization
* removal of dummy delay */
@@ -951,10 +893,8 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
if (readCount++ > 40)
break; /* don't wait any longer */
}
- if (status & MUSYCC_TX_OWNED)
- {
- if (cxt1e1_log_level >= LOG_MONITOR)
- {
+ if (status & MUSYCC_TX_OWNED) {
+ if (cxt1e1_log_level >= LOG_MONITOR) {
pr_info("%s: Port %d Chan %2d - unexpected TX msg ownership intr (md %p sts %x)\n",
pi->up->devname, pi->portnum, ch->channum,
md, status);
@@ -965,8 +905,7 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
musycc_dump_txbuffer_ring (ch, 0);
}
break; /* Not our mdesc, done */
- } else
- {
+ } else {
if (cxt1e1_log_level >= LOG_MONITOR)
pr_info("%s: Port %d Chan %2d - recovered TX msg ownership [%d] (md %p sts %x)\n",
pi->up->devname, pi->portnum, ch->channum, readCount, md, status);
@@ -975,8 +914,7 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
ch->txd_irq_srv = md->snext;
md->data = 0;
- if (md->mem_token != 0)
- {
+ if (md->mem_token != 0) {
/* upcount channel */
atomic_sub (OS_mem_token_tlen (md->mem_token), &ch->tx_pending);
/* upcount card */
@@ -991,8 +929,7 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
{
int hdlcnum = (pi->portnum * 32 + gchan);
- if (hdlcnum >= 228)
- {
+ if (hdlcnum >= 228) {
if (nciProcess_TX_complete)
(*nciProcess_TX_complete) (hdlcnum,
getuserbychan (gchan));
@@ -1012,16 +949,14 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
++ch->txd_free;
FLUSH_MEM_WRITE ();
- if ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && (status & EOBIRQ_ENABLE))
- {
+ if ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && (status & EOBIRQ_ENABLE)) {
if (cxt1e1_log_level >= LOG_MONITOR)
pr_info("%s: Mode (%x) incorrect EOB status (%x)\n",
pi->up->devname, ch->p.chan_mode, status);
if ((status & EOMIRQ_ENABLE) == 0)
break;
}
- }
- while ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && ((status & EOMIRQ_ENABLE) == 0));
+ } while ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && ((status & EOMIRQ_ENABLE) == 0));
/*
* NOTE: (The above 'while' is coupled w/ previous 'do', way above.) Each
* Transparent data buffer has the EOB bit, and NOT the EOM bit, set and
@@ -1034,15 +969,13 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
* Smooth flow control hysterisis by maintaining task stoppage until half
* the available write buffers are available.
*/
- if (ch->tx_full && (ch->txd_free >= (ch->txd_num / 2)))
- {
+ if (ch->tx_full && (ch->txd_free >= (ch->txd_num / 2))) {
/*
* Then, only releave task stoppage if we actually have enough
* buffers to service the last requested packet. It may require MORE
* than half the available!
*/
- if (ch->txd_free >= ch->txd_required)
- {
+ if (ch->txd_free >= ch->txd_required) {
#ifdef RLD_TXFULL_DEBUG
if (cxt1e1_log_level >= LOG_MONITOR2)
@@ -1057,8 +990,7 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan)
}
}
#ifdef RLD_TXFULL_DEBUG
- else if (ch->tx_full)
- {
+ else if (ch->tx_full) {
if (cxt1e1_log_level >= LOG_MONITOR2)
pr_info("tx_eom[%d]: bypass TX enable though room available? (txd_free %d txd_num/2 %d)\n",
ch->channum,
@@ -1087,8 +1019,7 @@ musycc_bh_rx_eom (mpi_t * pi, int gchan)
u_int32_t error;
ch = pi->chan[gchan];
- if (ch == 0 || ch->state != UP)
- {
+ if (ch == 0 || ch->state != UP) {
if (cxt1e1_log_level > LOG_ERROR)
pr_info("%s: intr: receive EOM on uninitialized channel %d\n",
pi->up->devname, gchan);
@@ -1097,8 +1028,7 @@ musycc_bh_rx_eom (mpi_t * pi, int gchan)
if (ch->mdr == 0)
return; /* can this happen ? */
- for (;;)
- {
+ for (;;) {
FLUSH_MEM_READ ();
md = &ch->mdr[ch->rxix_irq_srv];
status = le32_to_cpu (md->status);
@@ -1106,8 +1036,7 @@ musycc_bh_rx_eom (mpi_t * pi, int gchan)
break; /* Not our mdesc, done */
m = md->mem_token;
error = (status >> 16) & 0xf;
- if (error == 0)
- {
+ if (error == 0) {
#ifdef CONFIG_SBE_WAN256T3_NCOMM
int hdlcnum = (pi->portnum * 32 + gchan);
@@ -1115,16 +1044,14 @@ musycc_bh_rx_eom (mpi_t * pi, int gchan)
* if the packet number belongs to NCOMM, then send it to the TMS
* driver
*/
- if (hdlcnum >= 228)
- {
+ if (hdlcnum >= 228) {
if (nciProcess_RX_packet)
(*nciProcess_RX_packet) (hdlcnum, status & 0x3fff, m, ch->user);
} else
#endif /*** CONFIG_SBE_WAN256T3_NCOMM ***/
{
- if ((m2 = OS_mem_token_alloc (cxt1e1_max_mru)))
- {
+ if ((m2 = OS_mem_token_alloc (cxt1e1_max_mru))) {
/* substitute the mbuf+cluster */
md->mem_token = m2;
md->data = cpu_to_le32 (OS_vtophys (OS_mem_token_data (m2)));
@@ -1134,26 +1061,18 @@ musycc_bh_rx_eom (mpi_t * pi, int gchan)
ch->s.rx_packets++;
ch->s.rx_bytes += status & LENGTH_MASK;
} else
- {
ch->s.rx_dropped++;
- }
}
} else if (error == ERR_FCS)
- {
ch->s.rx_crc_errors++;
- } else if (error == ERR_ALIGN)
- {
+ else if (error == ERR_ALIGN)
ch->s.rx_missed_errors++;
- } else if (error == ERR_ABT)
- {
+ else if (error == ERR_ABT)
ch->s.rx_missed_errors++;
- } else if (error == ERR_LNG)
- {
+ else if (error == ERR_LNG)
ch->s.rx_length_errors++;
- } else if (error == ERR_SHT)
- {
+ else if (error == ERR_SHT)
ch->s.rx_length_errors++;
- }
FLUSH_MEM_WRITE ();
status = cxt1e1_max_mru;
if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
@@ -1180,16 +1099,13 @@ musycc_intr_th_handler (void *devp)
* might be shared, just return.
*/
if (ci->state == C_INIT)
- {
return IRQ_NONE;
- }
/*
* Marked as hardware available. Don't service interrupts, just clear the
* event.
*/
- if (ci->state == C_IDLE)
- {
+ if (ci->state == C_IDLE) {
status = pci_read_32 ((u_int32_t *) &ci->reg->isd);
/* clear the interrupt but process nothing else */
@@ -1218,10 +1134,8 @@ musycc_intr_th_handler (void *devp)
/* incorrect ISD's are encountered. */
/*********************************************************/
- if (nextInt != INTRPTS_NEXTINT (ci->intlog.this_status_new))
- {
- if (cxt1e1_log_level >= LOG_MONITOR)
- {
+ if (nextInt != INTRPTS_NEXTINT (ci->intlog.this_status_new)) {
+ if (cxt1e1_log_level >= LOG_MONITOR) {
pr_info("%s: note - updated ISD from %08x to %08x\n",
ci->devname, status,
(status & (~INTRPTS_NEXTINT_M)) | ci->intlog.this_status_new);
@@ -1243,9 +1157,8 @@ musycc_intr_th_handler (void *devp)
/**********************************************/
if (intCnt == INT_QUEUE_SIZE)
- {
currInt = ((intCnt - 1) + nextInt) & (INT_QUEUE_SIZE - 1);
- } else
+ else
/************************************************/
/* Interrupt Write Location Issues */
/* ------------------------------- */
@@ -1263,10 +1176,8 @@ musycc_intr_th_handler (void *devp)
/************************************************/
if (intCnt)
- {
currInt = (intCnt + nextInt) & (INT_QUEUE_SIZE - 1);
- } else
- {
+ else {
/*
* NOTE: Servicing an interrupt whose ISD contains a count of ZERO
* can be indicative of a Shared Interrupt chain. Our driver can be
@@ -1289,9 +1200,7 @@ musycc_intr_th_handler (void *devp)
ci->intlog.this_status_new = currInt;
if ((cxt1e1_log_level >= LOG_WARN) && (status & INTRPTS_INTFULL_M))
- {
pr_info("%s: Interrupt queue full condition occurred\n", ci->devname);
- }
if (cxt1e1_log_level >= LOG_DEBUG)
pr_info("%s: interrupts pending, isd @ 0x%p: %x curr %d cnt %d NEXT %d\n",
ci->devname, &ci->reg->isd,
@@ -1336,8 +1245,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
* Hardware not available, potential interrupt hang. But since interrupt
* might be shared, just return.
*/
- if ((drvr_state != SBE_DRVR_AVAILABLE) || (ci->state == C_INIT))
- {
+ if ((drvr_state != SBE_DRVR_AVAILABLE) || (ci->state == C_INIT)) {
#if defined(SBE_ISR_IMMEDIATE)
return 0L;
#else
@@ -1345,8 +1253,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
#endif
}
#if defined(SBE_ISR_TASKLET) || defined(SBE_ISR_IMMEDIATE)
- if (drvr_state != SBE_DRVR_AVAILABLE)
- {
+ if (drvr_state != SBE_DRVR_AVAILABLE) {
#if defined(SBE_ISR_TASKLET)
return;
#elif defined(SBE_ISR_IMMEDIATE)
@@ -1365,8 +1272,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
max_bh = max (bh, max_bh);
}
atomic_set (&ci->bh_pending, 0);/* if here, no longer pending */
- while ((headx = ci->iqp_headx) != (tailx = ci->iqp_tailx))
- {
+ while ((headx = ci->iqp_headx) != (tailx = ci->iqp_tailx)) {
intCnt = (tailx >= headx) ? (tailx - headx) : (tailx - headx + INT_QUEUE_SIZE);
currInt = le32_to_cpu (ci->iqd_p[headx]);
@@ -1385,8 +1291,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
if ((currInt == badInt) || (currInt == badInt2))
ci->intlog.drvr_int_failure++;
- while ((currInt == badInt) || (currInt == badInt2))
- {
+ while ((currInt == badInt) || (currInt == badInt2)) {
for (loopCount = 0; loopCount < 0x30; loopCount++)
OS_uwait_dummy (); /* use call to avoid optimization removal
* of dummy delay */
@@ -1396,9 +1301,8 @@ musycc_intr_bh_tasklet (ci_t * ci)
break;
}
- if ((currInt == badInt) || (currInt == badInt2)) /* catch failure of Bug
+ if ((currInt == badInt) || (currInt == badInt2)) { /* catch failure of Bug
* Fix checking */
- {
if (cxt1e1_log_level >= LOG_WARN)
pr_info("%s: Illegal Interrupt Detected @ 0x%p, mod %d.)\n",
ci->devname, &ci->iqd_p[headx], headx);
@@ -1414,12 +1318,9 @@ musycc_intr_bh_tasklet (ci_t * ci)
*/
if (currInt == badInt)
- {
ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY2);
- } else
- {
+ else
ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY);
- }
ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */
FLUSH_MEM_WRITE ();
FLUSH_MEM_READ ();
@@ -1434,8 +1335,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY);
FLUSH_MEM_WRITE ();
- if (cxt1e1_log_level >= LOG_DEBUG)
- {
+ if (cxt1e1_log_level >= LOG_DEBUG) {
if (err != 0)
pr_info(" %08x -> err: %2d,", currInt, err);
@@ -1445,11 +1345,9 @@ musycc_intr_bh_tasklet (ci_t * ci)
pi = &ci->port[group]; /* notice that here we assume 1-1 group -
* port mapping */
ch = pi->chan[gchan];
- switch (event)
- {
+ switch (event) {
case EVE_SACK: /* Service Request Acknowledge */
- if (cxt1e1_log_level >= LOG_DEBUG)
- {
+ if (cxt1e1_log_level >= LOG_DEBUG) {
volatile u_int32_t r;
r = pci_read_32 ((u_int32_t *) &pi->reg->srd);
@@ -1463,12 +1361,9 @@ musycc_intr_bh_tasklet (ci_t * ci)
case EVE_EOM: /* End Of Message */
case EVE_EOB: /* End Of Buffer (Transparent mode) */
if (tx)
- {
musycc_bh_tx_eom (pi, gchan);
- } else
- {
+ else
musycc_bh_rx_eom (pi, gchan);
- }
#if 0
break;
#else
@@ -1480,9 +1375,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
#endif
case EVE_NONE:
if (err == ERR_SHT)
- {
ch->s.rx_length_errors++;
- }
break;
default:
if (cxt1e1_log_level >= LOG_WARN)
@@ -1498,8 +1391,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
* bit-level processing.
*/
- switch (err)
- {
+ switch (err) {
case ERR_ONR:
/*
* Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors], this
@@ -1508,8 +1400,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
* Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], this error
* requires Receive channel reactivation.
*/
- if (tx)
- {
+ if (tx) {
/*
* TX ONR Error only occurs when channel is configured for
@@ -1532,9 +1423,8 @@ musycc_intr_bh_tasklet (ci_t * ci)
pr_info("%s: TX buffer underflow [ONR] on channel %d, mode %x QStopped %x free %d\n",
ci->devname, ch->channum, ch->p.chan_mode, sd_queue_stopped (ch->user), ch->txd_free);
#ifdef RLD_DEBUG
- if (ch->p.chan_mode == 2) /* problem = ONR on HDLC
+ if (ch->p.chan_mode == 2) { /* problem = ONR on HDLC
* mode */
- {
pr_info("++ Failed Last %x Next %x QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
(u_int32_t) ch->txd_irq_srv, (u_int32_t) ch->txd_usr_add,
sd_queue_stopped (ch->user),
@@ -1544,8 +1434,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
#endif
}
}
- } else /* RX buffer overrun */
- {
+ } else { /* RX buffer overrun */
/*
* Per MUSYCC manual, Section 6.4.8.4 [Receive Errors],
* channel recovery for this RX ONR error IS required. It is
@@ -1556,8 +1445,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
ch->s.rx_over_errors++;
ch->ch_start_rx = CH_START_RX_ONR;
- if (cxt1e1_log_level >= LOG_WARN)
- {
+ if (cxt1e1_log_level >= LOG_WARN) {
pr_info("%s: RX buffer overflow [ONR] on channel %d, mode %x\n",
ci->devname, ch->channum, ch->p.chan_mode);
//musycc_dump_rxbuffer_ring (ch, 0); /* RLD DEBUG */
@@ -1566,8 +1454,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
musycc_chan_restart (ch);
break;
case ERR_BUF:
- if (tx)
- {
+ if (tx) {
ch->s.tx_fifo_errors++;
ch->ch_start_tx = CH_START_TX_BUF;
/*
@@ -1577,8 +1464,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
if (cxt1e1_log_level >= LOG_MONITOR)
pr_info("%s: TX buffer underrun [BUFF] on channel %d, mode %x\n",
ci->devname, ch->channum, ch->p.chan_mode);
- } else /* RX buffer overrun */
- {
+ } else { /* RX buffer overrun */
ch->s.rx_over_errors++;
/*
* Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], HDLC
@@ -1610,16 +1496,13 @@ musycc_intr_bh_tasklet (ci_t * ci)
/* Check for interrupt lost condition */
if ((currInt & INTRPT_ILOST_M) && (cxt1e1_log_level >= LOG_ERROR))
- {
pr_info("%s: Interrupt queue overflow - ILOST asserted\n",
ci->devname);
- }
ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */
FLUSH_MEM_WRITE ();
FLUSH_MEM_READ ();
} /* while */
- if ((cxt1e1_log_level >= LOG_MONITOR2) && (ci->iqp_headx != ci->iqp_tailx))
- {
+ if ((cxt1e1_log_level >= LOG_MONITOR2) && (ci->iqp_headx != ci->iqp_tailx)) {
int bh;
bh = atomic_read (&CI->bh_pending);
@@ -1690,16 +1573,12 @@ musycc_chan_down (ci_t * dummy, int channum)
pi->regram->rmp[gchan] = 0;
FLUSH_MEM_WRITE ();
for (i = 0; i < ch->txd_num; i++)
- {
if (ch->mdt[i].mem_token != 0)
OS_mem_token_free (ch->mdt[i].mem_token);
- }
for (i = 0; i < ch->rxd_num; i++)
- {
if (ch->mdr[i].mem_token != 0)
OS_mem_token_free (ch->mdr[i].mem_token);
- }
OS_kfree (ch->mdr);
ch->mdr = 0;
@@ -1787,16 +1666,14 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token)
m2 = mem_token;
txd_need_cnt = 0;
for (len = OS_mem_token_tlen (m2); len > 0;
- m2 = (void *) OS_mem_token_next (m2))
- {
+ m2 = (void *) OS_mem_token_next (m2)) {
if (!OS_mem_token_len (m2))
continue;
txd_need_cnt++;
len -= OS_mem_token_len (m2);
}
- if (txd_need_cnt == 0)
- {
+ if (txd_need_cnt == 0) {
if (cxt1e1_log_level >= LOG_MONITOR2)
pr_info("%s channel %d: no TX data in User buffer\n", ci->devname, channum);
OS_mem_token_free (mem_token);
@@ -1805,14 +1682,11 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token)
/*************************************************/
/** Are there sufficient descriptors available? **/
/*************************************************/
- if (txd_need_cnt > ch->txd_num) /* never enough descriptors for this
- * large a buffer */
- {
+ if (txd_need_cnt > ch->txd_num) { /* never enough descriptors for this
+ * large a buffer */
if (cxt1e1_log_level >= LOG_DEBUG)
- {
pr_info("start_xmit: discarding buffer, insufficient descriptor cnt %d, need %d.\n",
ch->txd_num, txd_need_cnt + 1);
- }
ch->s.tx_dropped++;
OS_mem_token_free (mem_token);
return 0;
@@ -1823,13 +1697,10 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token)
/************************************************************/
/** flow control the line if not enough descriptors remain **/
/************************************************************/
- if (txd_need_cnt > ch->txd_free)
- {
+ if (txd_need_cnt > ch->txd_free) {
if (cxt1e1_log_level >= LOG_MONITOR2)
- {
pr_info("start_xmit[%d]: EBUSY - need more descriptors, have %d of %d need %d\n",
channum, ch->txd_free, ch->txd_num, txd_need_cnt);
- }
ch->tx_full = 1;
ch->txd_required = txd_need_cnt;
sd_disable_xmit (ch->user);
@@ -1844,8 +1715,7 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token)
m2 = mem_token;
md = ch->txd_usr_add; /* get current available descriptor */
- for (len = OS_mem_token_tlen (m2); len > 0; m2 = OS_mem_token_next (m2))
- {
+ for (len = OS_mem_token_tlen (m2); len > 0; m2 = OS_mem_token_next (m2)) {
int u = OS_mem_token_len (m2);
if (!u)
@@ -1861,8 +1731,7 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token)
if (len) /* not last chunk */
u |= EOBIRQ_ENABLE;
- else if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
- {
+ else if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) {
/*
* Per MUSYCC Ref 6.4.9 for Transparent Mode, the host must
* always clear EOMIRQ_ENABLE in every Transmit Buffer Descriptor
@@ -1875,8 +1744,7 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token)
/* last chunk in hdlc mode */
u |= (ch->p.idlecode << IDLE_CODE);
- if (ch->p.pad_fill_count)
- {
+ if (ch->p.pad_fill_count) {
#if 0
/* NOOP NOTE: u_int8_t cannot be > 0xFF */
/* sanitize pad_fill_count for maximums allowed by hardware */
@@ -1919,9 +1787,7 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token)
* transmission.
*/
if (ch->ch_start_tx)
- {
musycc_chan_restart (ch);
- }
#ifdef SBE_WAN256T3_ENABLE
wan256t3_led (ci, LED_TX, LEDV_G);
#endif
--
1.7.10.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
