Trivial Whitespace changes only. No checkpatch errors exist in et131x
after this change.
Signed-off-by: Mark Einon <mark.einon@xxxxxxxxx>
---
drivers/staging/et131x/et131x.c | 45 +++++++++++++++++++++++----------------
1 file changed, 27 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index a7c115d..faec182 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1870,8 +1870,10 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter)
}
/* Now's the best time to initialize FBR contents */
- fbr_entry = (struct fbr_desc *) rx_local->fbr[id]->ring_virtaddr;
- for (entry = 0; entry < rx_local->fbr[id]->num_entries; entry++) {
+ fbr_entry =
+ (struct fbr_desc *) rx_local->fbr[id]->ring_virtaddr;
+ for (entry = 0;
+ entry < rx_local->fbr[id]->num_entries; entry++) {
fbr_entry->addr_hi = rx_local->fbr[id]->bus_high[entry];
fbr_entry->addr_lo = rx_local->fbr[id]->bus_low[entry];
fbr_entry->word2 = entry;
@@ -1881,8 +1883,10 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter)
/* Set the address and parameters of Free buffer ring 1 and 0
* into the 1310's registers
*/
- writel(upper_32_bits(rx_local->fbr[id]->ring_physaddr), base_hi);
- writel(lower_32_bits(rx_local->fbr[id]->ring_physaddr), base_lo);
+ writel(upper_32_bits(rx_local->fbr[id]->ring_physaddr),
+ base_hi);
+ writel(lower_32_bits(rx_local->fbr[id]->ring_physaddr),
+ base_lo);
writel(rx_local->fbr[id]->num_entries - 1, num_des);
writel(ET_DMA10_WRAP, full_offset);
@@ -2286,7 +2290,8 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
for (id = 0; id < NUM_FBRS; id++) {
/* Allocate an area of memory for Free Buffer Ring */
- bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[id]->num_entries);
+ bufsize =
+ (sizeof(struct fbr_desc) * rx_ring->fbr[id]->num_entries);
rx_ring->fbr[id]->ring_virtaddr =
dma_alloc_coherent(&adapter->pdev->dev,
bufsize,
@@ -2302,7 +2307,8 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
for (id = 0; id < NUM_FBRS; id++) {
fbr_chunksize = (FBR_CHUNKS * rx_ring->fbr[id]->buffsize);
- for (i = 0; i < (rx_ring->fbr[id]->num_entries / FBR_CHUNKS); i++) {
+ for (i = 0;
+ i < (rx_ring->fbr[id]->num_entries / FBR_CHUNKS); i++) {
dma_addr_t fbr_tmp_physaddr;
rx_ring->fbr[id]->mem_virtaddrs[i] = dma_alloc_coherent(
@@ -2424,7 +2430,8 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
index < (rx_ring->fbr[id]->num_entries / FBR_CHUNKS);
index++) {
if (rx_ring->fbr[id]->mem_virtaddrs[index]) {
- bufsize = rx_ring->fbr[id]->buffsize * FBR_CHUNKS;
+ bufsize =
+ rx_ring->fbr[id]->buffsize * FBR_CHUNKS;
dma_free_coherent(&adapter->pdev->dev,
bufsize,
@@ -2558,7 +2565,8 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd)
else
offset = &rx_dma->fbr1_full_offset;
- next = (struct fbr_desc *) (rx_local->fbr[ring_index]->ring_virtaddr) +
+ next = (struct fbr_desc *)
+ (rx_local->fbr[ring_index]->ring_virtaddr) +
INDEX10(rx_local->fbr[ring_index]->local_full);
/* Handle the Free Buffer Ring advancement here. Write
@@ -2569,9 +2577,10 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd)
next->addr_lo = rx_local->fbr[ring_index]->bus_low[buff_index];
next->word2 = buff_index;
- writel(bump_free_buff_ring(&rx_local->fbr[ring_index]->local_full,
- rx_local->fbr[ring_index]->num_entries - 1),
- offset);
+ writel(bump_free_buff_ring(
+ &rx_local->fbr[ring_index]->local_full,
+ rx_local->fbr[ring_index]->num_entries - 1),
+ offset);
spin_unlock_irqrestore(&adapter->fbr_lock, flags);
} else {
@@ -2980,19 +2989,19 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb)
} else {
desc[frag].len_vlan = skb_headlen(skb) / 2;
dma_addr = dma_map_single(&adapter->pdev->dev,
- skb->data,
- (skb_headlen(skb) / 2),
- DMA_TO_DEVICE);
+ skb->data,
+ (skb_headlen(skb) / 2),
+ DMA_TO_DEVICE);
desc[frag].addr_lo = lower_32_bits(dma_addr);
desc[frag].addr_hi = upper_32_bits(dma_addr);
frag++;
desc[frag].len_vlan = skb_headlen(skb) / 2;
dma_addr = dma_map_single(&adapter->pdev->dev,
- skb->data +
- (skb_headlen(skb) / 2),
- (skb_headlen(skb) / 2),
- DMA_TO_DEVICE);
+ skb->data +
+ (skb_headlen(skb) / 2),
+ (skb_headlen(skb) / 2),
+ DMA_TO_DEVICE);
desc[frag].addr_lo = lower_32_bits(dma_addr);
desc[frag].addr_hi = upper_32_bits(dma_addr);
frag++;
--
1.7.9.5
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
