This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing through devpriv->s_EeParameters.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/addi_apci_1516.c | 33 ++++++-------------------
1 file changed, 8 insertions(+), 25 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi_apci_1516.c b/drivers/staging/comedi/drivers/addi_apci_1516.c
index f4ccfc6..1bb059f 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1516.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1516.c
@@ -87,21 +87,6 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
dev->iobase = pci_resource_start(pcidev, 1);
devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2);
- /* Initialize parameters that can be overridden in EEPROM */
- devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
- devpriv->s_EeParameters.i_NbrAoChannel = this_board->i_NbrAoChannel;
- devpriv->s_EeParameters.i_AiMaxdata = this_board->i_AiMaxdata;
- devpriv->s_EeParameters.i_AoMaxdata = this_board->i_AoMaxdata;
- devpriv->s_EeParameters.i_NbrDiChannel = this_board->i_NbrDiChannel;
- devpriv->s_EeParameters.i_NbrDoChannel = this_board->i_NbrDoChannel;
- devpriv->s_EeParameters.i_DoMaxdata = this_board->i_DoMaxdata;
- devpriv->s_EeParameters.i_Dma = this_board->i_Dma;
- devpriv->s_EeParameters.i_Timer = this_board->i_Timer;
- devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
- this_board->ui_MinAcquisitiontimeNs;
- devpriv->s_EeParameters.ui_MinDelaytimeNs =
- this_board->ui_MinDelaytimeNs;
-
n_subdevices = 7;
ret = comedi_alloc_subdevices(dev, n_subdevices);
if (ret)
@@ -117,13 +102,12 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
/* Allocate and Initialise DI Subdevice Structures */
s = &dev->subdevices[2];
- if (devpriv->s_EeParameters.i_NbrDiChannel) {
+ if (this_board->i_NbrDiChannel) {
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
- s->n_chan = devpriv->s_EeParameters.i_NbrDiChannel;
+ s->n_chan = this_board->i_NbrDiChannel;
s->maxdata = 1;
- s->len_chanlist =
- devpriv->s_EeParameters.i_NbrDiChannel;
+ s->len_chanlist = this_board->i_NbrDiChannel;
s->range_table = &range_digital;
s->io_bits = 0; /* all bits input */
s->insn_bits = apci1516_di_insn_bits;
@@ -132,14 +116,13 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
}
/* Allocate and Initialise DO Subdevice Structures */
s = &dev->subdevices[3];
- if (devpriv->s_EeParameters.i_NbrDoChannel) {
+ if (this_board->i_NbrDoChannel) {
s->type = COMEDI_SUBD_DO;
s->subdev_flags =
SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
- s->n_chan = devpriv->s_EeParameters.i_NbrDoChannel;
- s->maxdata = devpriv->s_EeParameters.i_DoMaxdata;
- s->len_chanlist =
- devpriv->s_EeParameters.i_NbrDoChannel;
+ s->n_chan = this_board->i_NbrDoChannel;
+ s->maxdata = 1;
+ s->len_chanlist = this_board->i_NbrDoChannel;
s->range_table = &range_digital;
s->io_bits = 0xf; /* all bits output */
s->insn_bits = apci1516_do_insn_bits;
@@ -149,7 +132,7 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
/* Allocate and Initialise Timer Subdevice Structures */
s = &dev->subdevices[4];
- if (devpriv->s_EeParameters.i_Timer) {
+ if (this_board->i_Timer) {
s->type = COMEDI_SUBD_TIMER;
s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
s->n_chan = 1;
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
