Reading the eeprom on the boards supported by this driver is not
necessary. All the information required is in the boardinfo.
Remove the eeprom support code since it's not really interesting
or useful.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/addi_apci_1516.c | 46 +------------------------
1 file changed, 1 insertion(+), 45 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi_apci_1516.c b/drivers/staging/comedi/drivers/addi_apci_1516.c
index 0c45a5b..2be6c85 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1516.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1516.c
@@ -8,7 +8,6 @@
#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */
#endif
-#include "addi-data/addi_eeprom.c"
#include "addi-data/hwdrv_apci1516.c"
static const struct addi_board apci1516_boardtypes[] = {
@@ -61,23 +60,6 @@ static const struct addi_board apci1516_boardtypes[] = {
},
};
-static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
-{
- const struct addi_board *this_board = comedi_board(dev);
- struct addi_private *devpriv = dev->private;
- unsigned short w_Address = CR_CHAN(insn->chanspec);
- unsigned short w_Data;
-
- w_Data = addi_eeprom_readw(devpriv->i_IobaseAmcc,
- this_board->pc_EepromChip, 2 * w_Address);
- data[0] = w_Data;
-
- return insn->n;
-}
-
static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
@@ -120,7 +102,6 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
struct addi_private *devpriv;
struct comedi_subdevice *s;
int ret, n_subdevices;
- unsigned int dw_Dummy;
this_board = addi_find_boardinfo(dev, pcidev);
if (!this_board)
@@ -181,23 +162,6 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
dev->irq = pcidev->irq;
}
- /* Read eepeom and fill addi_board Structure */
-
- if (this_board->i_PCIEeprom) {
- if (!(strcmp(this_board->pc_EepromChip, "S5920"))) {
- /* Set 3 wait stait */
- if (!(strcmp(dev->board_name, "apci035"))) {
- outl(0x80808082, devpriv->i_IobaseAmcc + 0x60);
- } else {
- outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
- }
- /* Enable the interrupt for the controller */
- dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
- outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
- }
- addi_eeprom_read_info(dev, pci_resource_start(pcidev, 0));
- }
-
n_subdevices = 7;
ret = comedi_alloc_subdevices(dev, n_subdevices);
if (ret)
@@ -275,15 +239,7 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
/* EEPROM */
s = &dev->subdevices[6];
- if (this_board->i_PCIEeprom) {
- s->type = COMEDI_SUBD_MEMORY;
- s->subdev_flags = SDF_READABLE | SDF_INTERNAL;
- s->n_chan = 256;
- s->maxdata = 0xffff;
- s->insn_read = i_ADDIDATA_InsnReadEeprom;
- } else {
- s->type = COMEDI_SUBD_UNUSED;
- }
+ s->type = COMEDI_SUBD_UNUSED;
i_ADDI_Reset(dev);
return 0;
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
