Fixed a description of the procedure call dev_dbg().
Signed-off-by: YAMANE Toshiaki <yamanetoshi@xxxxxxxxx>
---
drivers/staging/serqt_usb2/serqt_usb2.c | 59 +++++++++++++++++++++----------
1 file changed, 40 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 099bc69..9bc8923 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -272,7 +272,8 @@ static void qt_write_bulk_callback(struct urb *urb)
status = urb->status;
if (status) {
- dev_dbg(&urb->dev->dev, "nonzero write bulk status received:%d\n", status);
+ dev_dbg(&urb->dev->dev,
+ "nonzero write bulk status received:%d\n", status);
return;
}
@@ -321,7 +322,8 @@ static void qt_read_bulk_callback(struct urb *urb)
/* index = MINOR(port->tty->device) - serial->minor; */
index = tty->index - serial->minor;
- dev_dbg(&port->dev, "%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
+ dev_dbg(&port->dev,
+ "%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
if (port_paranoia_check(port, __func__) != 0) {
qt_port->ReadBulkStopped = 1;
@@ -333,7 +335,8 @@ static void qt_read_bulk_callback(struct urb *urb)
if (qt_port->closePending == 1) {
/* Were closing , stop reading */
- dev_dbg(&port->dev, "%s - (qt_port->closepending == 1\n", __func__);
+ dev_dbg(&port->dev,
+ "%s - (qt_port->closepending == 1\n", __func__);
qt_port->ReadBulkStopped = 1;
goto exit;
}
@@ -912,10 +915,14 @@ static int qt_open(struct tty_struct *tty,
dev_dbg(&port->dev, "port number is %d\n", port->number);
dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor);
- dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
- dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
- dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);
- dev_dbg(&port->dev, "port's number in the device is %d\n", quatech_port->port_num);
+ dev_dbg(&port->dev,
+ "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
+ dev_dbg(&port->dev,
+ "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
+ dev_dbg(&port->dev, "Interrupt endpoint is %d\n",
+ port->interrupt_in_endpointAddress);
+ dev_dbg(&port->dev, "port's number in the device is %d\n",
+ quatech_port->port_num);
quatech_port->read_urb = port->read_urb;
/* set up our bulk in urb */
@@ -928,7 +935,8 @@ static int qt_open(struct tty_struct *tty,
quatech_port->read_urb->transfer_buffer_length,
qt_read_bulk_callback, quatech_port);
- dev_dbg(&port->dev, "qt_open: bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
+ dev_dbg(&port->dev, "qt_open: bulkin endpoint is %d\n",
+ port->bulk_in_endpointAddress);
quatech_port->read_urb_busy = true;
result = usb_submit_urb(quatech_port->read_urb, GFP_KERNEL);
if (result) {
@@ -1021,15 +1029,18 @@ static void qt_close(struct usb_serial_port *port)
/* Close uart channel */
status = qt_close_channel(serial, index);
if (status < 0)
- dev_dbg(&port->dev, "%s - port %d qt_close_channel failed.\n", __func__, port->number);
+ dev_dbg(&port->dev,
+ "%s - port %d qt_close_channel failed.\n",
+ __func__, port->number);
port0->open_ports--;
- dev_dbg(&port->dev, "qt_num_open_ports in close%d:in port%d\n", port0->open_ports, port->number);
+ dev_dbg(&port->dev, "qt_num_open_ports in close%d:in port%d\n",
+ port0->open_ports, port->number);
if (port0->open_ports == 0) {
if (serial->port[0]->interrupt_in_urb) {
- dev_dbg(&port->dev, "%s", "Shutdown interrupt_in_urb\n");
+ dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n");
usb_kill_urb(serial->port[0]->interrupt_in_urb);
}
@@ -1053,7 +1064,8 @@ static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
return -ENODEV;
if (count == 0) {
- dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
+ dev_dbg(&port->dev,
+ "%s - write request of 0 bytes\n", __func__);
return 0;
}
@@ -1080,7 +1092,8 @@ static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
- dev_dbg(&port->dev, "%s - failed submitting write urb, error %d\n",
+ dev_dbg(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
__func__, result);
else
result = count;
@@ -1163,7 +1176,8 @@ static int qt_ioctl(struct tty_struct *tty,
return 0;
}
- dev_dbg(&port->dev, "%s -No ioctl for that one. port = %d\n", __func__, port->number);
+ dev_dbg(&port->dev, "%s -No ioctl for that one. port = %d\n",
+ __func__, port->number);
return -ENOIOCTLCMD;
}
@@ -1238,7 +1252,8 @@ static void qt_set_termios(struct tty_struct *tty,
/* Now determine flow control */
if (cflag & CRTSCTS) {
- dev_dbg(&port->dev, "%s - Enabling HW flow control port %d\n", __func__, port->number);
+ dev_dbg(&port->dev, "%s - Enabling HW flow control port %d\n",
+ __func__, port->number);
/* Enable RTS/CTS flow control */
status = BoxSetHW_FlowCtrl(port->serial, index, 1);
@@ -1249,7 +1264,9 @@ static void qt_set_termios(struct tty_struct *tty,
}
} else {
/* Disable RTS/CTS flow control */
- dev_dbg(&port->dev, "%s - disabling HW flow control port %d\n", __func__, port->number);
+ dev_dbg(&port->dev,
+ "%s - disabling HW flow control port %d\n",
+ __func__, port->number);
status = BoxSetHW_FlowCtrl(port->serial, index, 0);
if (status < 0) {
@@ -1268,17 +1285,21 @@ static void qt_set_termios(struct tty_struct *tty,
BoxSetSW_FlowCtrl(port->serial, index, stop_char,
start_char);
if (status < 0)
- dev_dbg(&port->dev, "BoxSetSW_FlowCtrl (enabled) failed\n");
+ dev_dbg(&port->dev,
+ "BoxSetSW_FlowCtrl (enabled) failed\n");
} else {
/* disable SW flow control */
status = BoxDisable_SW_FlowCtrl(port->serial, index);
if (status < 0)
- dev_dbg(&port->dev, "BoxSetSW_FlowCtrl (diabling) failed\n");
+ dev_dbg(&port->dev,
+ "BoxSetSW_FlowCtrl (diabling) failed\n");
}
termios->c_cflag &= ~CMSPAR;
- /* FIXME: Error cases should be returning the actual bits changed only */
+ /* FIXME:
+ Error cases should be returning the actual bits changed only
+ */
}
static void qt_break(struct tty_struct *tty, int break_state)
--
1.7.9.5
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
