On Thu, Nov 8, 2012 at 11:30 PM, Kevin McKinney <klmckinney1@xxxxxxxxx> wrote:
> On Thu, Nov 8, 2012 at 10:27 AM, Muhammad Minhazul Haque
> <mdminhazulhaque@xxxxxxxxx> wrote:
>> Mr. Kevin and everyone,
Also, no need to call me "Mr." ; I am not that important :)
>> There was a serious mistake in the previous message. I forgot to
>> attach the patch. Please ignore it. I am posting it again.
>>
>> I was never reported for that product id 0x0132. Yet you can continue
>> support for it if it is rare. In the meantime, we can add more devices
>> to the header and add those names to "usb_device_id" table in
>> "InterfaceInit.c". I added a new product string
>> "BCM_USB_PRODUCT_ID_ZTE_326" and also modified the device id table.
>>
>> Again, I removed product if 0xbccd because Beceem, ZTE, Sprint use
>> this id for the block device containing device driver. Again, this is
>> always switched to base product id via udev. Here is my dmesg output
>> when udev is turned off.
>> =====
>> root@inspiron:~# dmesg -c
>> [24449.439134] cdrom: issuing MRW background format suspend
>> [24459.102669] usb 2-1.2: new high-speed USB device number 11 using ehci_hcd
>> [24459.336258] scsi11 : usb-storage 2-1.2:1.0
>> [24460.334906] scsi 11:0:0:0: CD-ROM BCM-CD V 01.02 01.01
>> 1.13 PQ: 0 ANSI: 2
>> [24460.336721] sr0: scsi3-mmc drive: 0x/0x xa/form2 tray
>> [24460.336971] sr 11:0:0:0: Attached scsi CD-ROM sr0
>> [24460.337167] sr 11:0:0:0: Attached scsi generic sg1 type 5
>>
>> root@inspiron:~# mount /dev/sr1 /media/tmp
>> mount: block device /dev/sr1 is write-protected, mounting read-only
>> =====
>>
>> I did build after these changes and probed the module. It works
>> perfectly. I also tested 0x0172 and 0x0173. No error is reported. So I
>> assure that these products are valid. Not sure about 0x0132. Here is
>> the modinfo output.
>> =====
>> license: GPL
>> version: 5.2.45
>> description: Beceem Communications Inc. WiMAX driver
>> srcversion: 6968AC3635745331FE6470D
>> alias: usb:v19D2p0132d*dc*dsc*dp*ic*isc*ip*
>> alias: usb:v19D2p0007d*dc*dsc*dp*ic*isc*ip*
>> alias: usb:v19D2p0173d*dc*dsc*dp*ic*isc*ip*
>> alias: usb:v19D2p0172d*dc*dsc*dp*ic*isc*ip*
>> alias: usb:v0489pE017d*dc*dsc*dp*ic*isc*ip*
>> alias: usb:v198Fp015Ed*dc*dsc*dp*ic*isc*ip*
>> alias: usb:v198Fp0300d*dc*dsc*dp*ic*isc*ip*
>> alias: usb:v198Fp0220d*dc*dsc*dp*ic*isc*ip*
>> alias: usb:v198Fp0210d*dc*dsc*dp*ic*isc*ip*
>> depends:
>> vermagic: 3.2.0-32-generic-pae SMP mod_unload modversions 686
>> parm: debug:Debug level (0=none,...,16=all) (uint)
>> =====
>>
>> This patch is currently against a linux 3.7-rc4 kernel, for the x86
>> architecture.
>>
>> The first patch is
>> =====
>> diff --git a/bcm.orig/InterfaceInit.c b/bcm/InterfaceInit.c
>> index b05f5f7..7da666e 100644
>> --- a/bcm.orig/InterfaceInit.c
>> +++ b/bcm/InterfaceInit.c
>> @@ -4,11 +4,12 @@ static struct usb_device_id InterfaceUsbtable[] = {
>> { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3) },
>> { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3B) },
>> { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3L) },
>> - { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SM250) },
>> - { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_226) },
>> + { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SYM) },
>> { USB_DEVICE(BCM_USB_VENDOR_ID_FOXCONN, BCM_USB_PRODUCT_ID_1901) },
>> + { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_226) },
>> { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_TU25) },
>> { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_226) },
>> + { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_326) },
>> { }
>> };
>> MODULE_DEVICE_TABLE(usb, InterfaceUsbtable);
>> =====
>>
>> And the second patch is
>> =====
>> diff --git a/bcm.orig/InterfaceInit.h b/bcm/InterfaceInit.h
>> index 866924e..1486608 100644
>> --- a/bcm.orig/InterfaceInit.h
>> +++ b/bcm/InterfaceInit.h
>> @@ -8,11 +8,11 @@
>> #define BCM_USB_PRODUCT_ID_T3 0x0300
>> #define BCM_USB_PRODUCT_ID_T3B 0x0210
>> #define BCM_USB_PRODUCT_ID_T3L 0x0220
>> -#define BCM_USB_PRODUCT_ID_SM250 0xbccd
>> #define BCM_USB_PRODUCT_ID_SYM 0x15E
>> -#define BCM_USB_PRODUCT_ID_1901 0xe017
>> +#define BCM_USB_PRODUCT_ID_1901 0xe017 /* Sprint U1901 */
>> #define BCM_USB_PRODUCT_ID_226 0x0132 /* not sure if this is valid */
>> #define BCM_USB_PRODUCT_ID_ZTE_226 0x172
>> +#define BCM_USB_PRODUCT_ID_ZTE_326 0x173 /* ZTE AX326 */
>> #define BCM_USB_PRODUCT_ID_ZTE_TU25 0x0007
>>
>> #define BCM_USB_MINOR_BASE 192
>> =====
>>
>> diffstat for this patch is:
>> =====
>> {bcm => bcm.orig}/InterfaceInit.c | 5 ++---
>> {bcm => bcm.orig}/InterfaceInit.h | 4 ++--
>> 2 files changed, 4 insertions(+), 5 deletions(-)
>> =====
>
> Thanks for these patches. I see the changes you have made a they look
> good, however I am not able to apply these patches. Can you resubmit
> them in the correct format?
>
>> To use the patch, remove module if it is probed. Build, and then probe.
>>
>> About the TODO: I currently have a solution to make the device work.
>> It is not from Intel's wimax stack. I used Beceem's API. Can we
>> discuss on this?
>
> Sure, lets work together to get this device working. It should be
> working correctly on 32 bit machines, however there is still an
> outstanding bug that I am trying to track down on 64 bit machines.
> Have you noticed this also?
>
> Thanks,
> Kevin
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
