[PATCH 22/29] staging: comedi: addi_apci_1032: only allocate one subdevice

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is only one subdevice used in the driver. Remove the unused
subdevice init and only allcoate space for the one used.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/addi_apci_1032.c | 31 +++----------------------
 1 file changed, 3 insertions(+), 28 deletions(-)

diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index 9e60d1f..1b4d698 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -40,7 +40,7 @@ static int apci1032_attach_pci(struct comedi_device *dev,
 {
 	struct addi_private *devpriv;
 	struct comedi_subdevice *s;
-	int ret, n_subdevices;
+	int ret;
 
 	dev->board_name = dev->driver->driver_name;
 
@@ -62,21 +62,12 @@ static int apci1032_attach_pci(struct comedi_device *dev,
 			dev->irq = pcidev->irq;
 	}
 
-	n_subdevices = 7;
-	ret = comedi_alloc_subdevices(dev, n_subdevices);
+	ret = comedi_alloc_subdevices(dev, 1);
 	if (ret)
 		return ret;
 
-	/*  Allocate and Initialise AI Subdevice Structures */
-	s = &dev->subdevices[0];
-	s->type = COMEDI_SUBD_UNUSED;
-
-	/*  Allocate and Initialise AO Subdevice Structures */
-	s = &dev->subdevices[1];
-	s->type = COMEDI_SUBD_UNUSED;
-
 	/*  Allocate and Initialise DI Subdevice Structures */
-	s = &dev->subdevices[2];
+	s = &dev->subdevices[0];
 	s->type		= COMEDI_SUBD_DI;
 	s->subdev_flags	= SDF_READABLE;
 	s->n_chan	= 32;
@@ -86,22 +77,6 @@ static int apci1032_attach_pci(struct comedi_device *dev,
 	s->insn_config	= i_APCI1032_ConfigDigitalInput;
 	s->insn_bits	= apci1032_di_insn_bits;
 
-	/*  Allocate and Initialise DO Subdevice Structures */
-	s = &dev->subdevices[3];
-	s->type = COMEDI_SUBD_UNUSED;
-
-	/*  Allocate and Initialise Timer Subdevice Structures */
-	s = &dev->subdevices[4];
-	s->type = COMEDI_SUBD_UNUSED;
-
-	/*  Allocate and Initialise TTL */
-	s = &dev->subdevices[5];
-	s->type = COMEDI_SUBD_UNUSED;
-
-	/* EEPROM */
-	s = &dev->subdevices[6];
-	s->type = COMEDI_SUBD_UNUSED;
-
 	apci1032_reset(dev);
 	return 0;
 }
-- 
1.7.11

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux