Update the comedi driver comment to reflect the fact that manual attachment of devices is no longer supported. Also replace the request to file a bug report about unidentified PCI device IDs with a request to let the maintainers know about such devices. Reformat the comment using the usual block comment style. Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx> --- drivers/staging/comedi/drivers/cb_pcidas64.c | 66 ++++++++++++++-------------- 1 file changed, 33 insertions(+), 33 deletions(-) diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index 771f043..68a1289 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -36,39 +36,39 @@ ************************************************************************/ /* - -Driver: cb_pcidas64 -Description: MeasurementComputing PCI-DAS64xx, 60XX, and 4020 series with the PLX 9080 PCI controller -Author: Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> -Status: works -Updated: 2002-10-09 -Devices: [Measurement Computing] PCI-DAS6402/16 (cb_pcidas64), - PCI-DAS6402/12, PCI-DAS64/M1/16, PCI-DAS64/M2/16, - PCI-DAS64/M3/16, PCI-DAS6402/16/JR, PCI-DAS64/M1/16/JR, - PCI-DAS64/M2/16/JR, PCI-DAS64/M3/16/JR, PCI-DAS64/M1/14, - PCI-DAS64/M2/14, PCI-DAS64/M3/14, PCI-DAS6013, PCI-DAS6014, - PCI-DAS6023, PCI-DAS6025, PCI-DAS6030, - PCI-DAS6031, PCI-DAS6032, PCI-DAS6033, PCI-DAS6034, - PCI-DAS6035, PCI-DAS6036, PCI-DAS6040, PCI-DAS6052, - PCI-DAS6070, PCI-DAS6071, PCI-DAS4020/12 - -Configuration options: - [0] - PCI bus of device (optional) - [1] - PCI slot of device (optional) - -These boards may be autocalibrated with the comedi_calibrate utility. - -To select the bnc trigger input on the 4020 (instead of the dio input), -specify a nonzero channel in the chanspec. If you wish to use an external -master clock on the 4020, you may do so by setting the scan_begin_src -to TRIG_OTHER, and using an INSN_CONFIG_TIMER_1 configuration insn -to configure the divisor to use for the external clock. - -Some devices are not identified because the PCI device IDs are not yet -known. If you have such a board, please file a bug report at -https://bugs.comedi.org. - -*/ + * Driver: cb_pcidas64 + * Description: MeasurementComputing PCI-DAS64xx, 60XX, and 4020 series + * with the PLX 9080 PCI controller + * Author: Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> + * Status: works + * Updated: Fri, 02 Nov 2012 18:58:55 +0000 + * Devices: [Measurement Computing] PCI-DAS6402/16 (cb_pcidas64), + * PCI-DAS6402/12, PCI-DAS64/M1/16, PCI-DAS64/M2/16, + * PCI-DAS64/M3/16, PCI-DAS6402/16/JR, PCI-DAS64/M1/16/JR, + * PCI-DAS64/M2/16/JR, PCI-DAS64/M3/16/JR, PCI-DAS64/M1/14, + * PCI-DAS64/M2/14, PCI-DAS64/M3/14, PCI-DAS6013, PCI-DAS6014, + * PCI-DAS6023, PCI-DAS6025, PCI-DAS6030, + * PCI-DAS6031, PCI-DAS6032, PCI-DAS6033, PCI-DAS6034, + * PCI-DAS6035, PCI-DAS6036, PCI-DAS6040, PCI-DAS6052, + * PCI-DAS6070, PCI-DAS6071, PCI-DAS4020/12 + * + * Configuration options: + * None. + * + * Manual attachment of PCI cards with the comedi_config utility is not + * supported by this driver; they are attached automatically. + * + * These boards may be autocalibrated with the comedi_calibrate utility. + * + * To select the bnc trigger input on the 4020 (instead of the dio input), + * specify a nonzero channel in the chanspec. If you wish to use an external + * master clock on the 4020, you may do so by setting the scan_begin_src + * to TRIG_OTHER, and using an INSN_CONFIG_TIMER_1 configuration insn + * to configure the divisor to use for the external clock. + * + * Some devices are not identified because the PCI device IDs are not yet + * known. If you have such a board, please let the maintainers know. + */ /* -- 1.7.12.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
