Reformat the comment used to describe the Comedi driver to use the usual block comment style. Update the information reflecting the fact that the driver no longer supports manual attachment of devices via the `COMEDI_DEVCONFIG` ioctl and `attach()` method. Also, in the instructions indicating where to put the firmware file, mention the expected name of the file since the driver requests the firmware file by name. Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx> --- drivers/staging/comedi/drivers/jr3_pci.c | 38 +++++++++++++++++--------------- 1 file changed, 20 insertions(+), 18 deletions(-) diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c index 9035e84..c5d1d69 100644 --- a/drivers/staging/comedi/drivers/jr3_pci.c +++ b/drivers/staging/comedi/drivers/jr3_pci.c @@ -21,24 +21,26 @@ */ /* -Driver: jr3_pci -Description: JR3/PCI force sensor board -Author: Anders Blomdell <anders.blomdell@xxxxxxxxxxxxxx> -Status: works -Devices: [JR3] PCI force sensor board (jr3_pci) - - The DSP on the board requires initialization code, which can - be loaded by placing it in /lib/firmware/comedi. - The initialization code should be somewhere on the media you got - with your card. One version is available from http://www.comedi.org - in the comedi_nonfree_firmware tarball. - - Configuration options: - [0] - PCI bus number - if bus number and slot number are 0, - then driver search for first unused card - [1] - PCI slot number - -*/ + * Driver: jr3_pci + * Description: JR3/PCI force sensor board + * Author: Anders Blomdell <anders.blomdell@xxxxxxxxxxxxxx> + * Updated: Thu, 01 Nov 2012 17:34:55 +0000 + * Status: works + * Devices: [JR3] PCI force sensor board (jr3_pci) + * + * Configuration options: + * None + * + * Manual configuration of comedi devices is not supported by this + * driver; supported PCI devices are configured as comedi devices + * automatically. + * + * The DSP on the board requires initialization code, which can be + * loaded by placing it in /lib/firmware/comedi. The initialization + * code should be somewhere on the media you got with your card. One + * version is available from http://www.comedi.org in the + * comedi_nonfree_firmware tarball. The file is called "jr3pci.idm". + */ #include "../comedidev.h" -- 1.7.12.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
