[PATCH 8/8] staging: comedi: gsc_hpdi: update driver description comment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Reformat the comment used to describe the Comedi driver to use the usual
block comment style.

Update the information reflecting the fact that the driver no longer
supports manual attachment of devices via the `COMEDI_DEVCONFIG` ioctl.

Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
 drivers/staging/comedi/drivers/gsc_hpdi.c | 36 +++++++++++++++----------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index c056c25..77b86820 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -26,24 +26,24 @@
 ************************************************************************/
 
 /*
-
-Driver: gsc_hpdi
-Description: General Standards Corporation High
-    Speed Parallel Digital Interface rs485 boards
-Author: Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx>
-Status: only receive mode works, transmit not supported
-Updated: 2003-02-20
-Devices: [General Standards Corporation] PCI-HPDI32 (gsc_hpdi),
-  PMC-HPDI32
-
-Configuration options:
-   [0] - PCI bus of device (optional)
-   [1] - PCI slot of device (optional)
-
-There are some additional hpdi models available from GSC for which
-support could be added to this driver.
-
-*/
+ * Driver: gsc_hpdi
+ * Description: General Standards Corporation High
+ *    Speed Parallel Digital Interface rs485 boards
+ * Author: Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx>
+ * Status: only receive mode works, transmit not supported
+ * Updated: Thu, 01 Nov 2012 16:17:38 +0000
+ * Devices: [General Standards Corporation] PCI-HPDI32 (gsc_hpdi),
+ *   PMC-HPDI32
+ *
+ * Configuration options:
+ *    None.
+ *
+ * Manual configuration of supported devices is not supported; they are
+ * configured automatically.
+ *
+ * There are some additional hpdi models available from GSC for which
+ * support could be added to this driver.
+ */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-- 
1.7.12.4

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux