Add namespace to the function by renaming the CamelCase function to
addi_eeprom_readw().
Rename the CamelCase parameters and local variables.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
.../staging/comedi/drivers/addi-data/addi_common.c | 2 +-
.../staging/comedi/drivers/addi-data/addi_eeprom.c | 95 +++++++++++-----------
2 files changed, 48 insertions(+), 49 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index 05a01e1..c77e772 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -60,7 +60,7 @@ static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev,
unsigned short w_Address = CR_CHAN(insn->chanspec);
unsigned short w_Data;
- w_Data = w_EepromReadWord(devpriv->i_IobaseAmcc,
+ w_Data = addi_eeprom_readw(devpriv->i_IobaseAmcc,
this_board->pc_EepromChip, 0x100 + (2 * w_Address));
data[0] = w_Data;
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
index 6c282ec..14cbafd 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
@@ -223,20 +223,19 @@ static unsigned short addi_eeprom_readw_nvram(unsigned long iobase,
return val;
}
-static unsigned short w_EepromReadWord(unsigned long iobase,
- char *type,
- unsigned short w_EepromStartAddress)
+static unsigned short addi_eeprom_readw(unsigned long iobase,
+ char *type,
+ unsigned short addr)
{
- unsigned short w_ReadWord = 0;
+ unsigned short val = 0;
- /* Test the PCI chip type */
if (!strcmp(type, "S5920") || !strcmp(type, "S5933"))
- w_ReadWord = addi_eeprom_readw_nvram(iobase, w_EepromStartAddress);
+ val = addi_eeprom_readw_nvram(iobase, addr);
if (!strcmp(type, "93C76"))
- w_ReadWord = addi_eeprom_readw_93c76(iobase, w_EepromStartAddress);
+ val = addi_eeprom_readw_93c76(iobase, addr);
- return w_ReadWord;
+ return val;
}
static int i_EepromReadDigitalInputHeader(unsigned long iobase,
@@ -247,17 +246,17 @@ static int i_EepromReadDigitalInputHeader(unsigned long iobase,
unsigned short w_Temp;
/* read nbr of channels */
- s_Header->w_Nchannel = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 6);
+ s_Header->w_Nchannel = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 6);
/* interruptible or not */
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 8);
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 8);
s_Header->b_Interruptible = (unsigned char) (w_Temp >> 7) & 0x01;
/* How many interruptible logic */
- s_Header->w_NinterruptLogic = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 10);
+ s_Header->w_NinterruptLogic = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 10);
return 0;
}
@@ -268,8 +267,8 @@ static int i_EepromReadDigitalOutputHeader(unsigned long iobase,
struct str_DigitalOutputHeader *s_Header)
{
/* Read Nbr channels */
- s_Header->w_Nchannel = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 6);
+ s_Header->w_Nchannel = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 6);
return 0;
}
@@ -283,15 +282,15 @@ static int i_EepromReadTimerHeader(unsigned long iobase,
unsigned short i, w_Size = 0, w_Temp;
/* Read No of Timer */
- s_Header->w_Ntimer = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 6);
+ s_Header->w_Ntimer = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 6);
/* Read header size */
for (i = 0; i < s_Header->w_Ntimer; i++) {
s_Header->s_TimerDetails[i].w_HeaderSize =
- w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 8 + w_Size + 0);
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 8 + w_Size + 2);
+ addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 8 + w_Size + 0);
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 8 + w_Size + 2);
/* Read Resolution */
s_Header->s_TimerDetails[i].b_Resolution =
@@ -301,8 +300,8 @@ static int i_EepromReadTimerHeader(unsigned long iobase,
s_Header->s_TimerDetails[i].b_Mode =
(unsigned char) (w_Temp >> 4) & 0x3F;
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 8 + w_Size + 4);
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 8 + w_Size + 4);
/* Read MinTiming */
s_Header->s_TimerDetails[i].w_MinTiming = (w_Temp >> 6) & 0x3FF;
@@ -324,12 +323,12 @@ static int i_EepromReadAnlogOutputHeader(unsigned long iobase,
unsigned short w_Temp;
/* No of channels for 1st hard component */
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 10);
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 10);
s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
/* Resolution for 1st hard component */
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 16);
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 16);
s_Header->b_Resolution = (unsigned char) (w_Temp >> 8) & 0xFF;
return 0;
}
@@ -341,19 +340,19 @@ static int i_EepromReadAnlogInputHeader(unsigned long iobase,
struct str_AnalogInputHeader *s_Header)
{
unsigned short w_Temp, w_Offset;
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 10);
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 10);
s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
- s_Header->w_MinConvertTiming = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 16);
- s_Header->w_MinDelayTiming = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 30);
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 20);
+ s_Header->w_MinConvertTiming = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 16);
+ s_Header->w_MinDelayTiming = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 30);
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 20);
s_Header->b_HasDma = (w_Temp >> 13) & 0x01; /* whether dma present or not */
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + 72); /* reading Y */
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + 72); /* reading Y */
w_Temp = w_Temp & 0x00FF;
if (w_Temp) /* Y>0 */
{
@@ -366,8 +365,8 @@ static int i_EepromReadAnlogInputHeader(unsigned long iobase,
}
/* read Resolution */
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + w_Address + w_Offset);
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + w_Address + w_Offset);
s_Header->b_Resolution = w_Temp & 0x001F; /* last 5 bits */
return 0;
@@ -389,25 +388,25 @@ static int i_EepromReadMainHeader(unsigned long iobase,
struct str_AnalogInputHeader s_AnalogInputHeader;
/* Read size */
- s_MainHeader.w_HeaderSize = w_EepromReadWord(iobase, type,
- 0x100 + 8);
+ s_MainHeader.w_HeaderSize = addi_eeprom_readw(iobase, type,
+ 0x100 + 8);
/* Read nbr of functionality */
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + 10);
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + 10);
s_MainHeader.b_Nfunctions = (unsigned char) w_Temp & 0x00FF;
/* Read functionality details */
for (i = 0; i < s_MainHeader.b_Nfunctions; i++) {
/* Read Type */
- w_Temp = w_EepromReadWord(iobase, type,
- 0x100 + 12 + w_Count);
+ w_Temp = addi_eeprom_readw(iobase, type,
+ 0x100 + 12 + w_Count);
s_MainHeader.s_Functions[i].b_Type = (unsigned char) w_Temp & 0x3F;
w_Count = w_Count + 2;
/* Read Address */
s_MainHeader.s_Functions[i].w_Address =
- w_EepromReadWord(iobase, type,
- 0x100 + 12 + w_Count);
+ addi_eeprom_readw(iobase, type,
+ 0x100 + 12 + w_Count);
w_Count = w_Count + 2;
}
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
