This fixes "line over 80 characters" for lines that are "over 140 characters"
A further patch can be released to fix remaining "line over 80 characters" if necessary.
drivers/staging/bcm/Bcmchar.c | 123 ++++++++++++++++++++++++++++++----------
1 files changed, 92 insertions(+), 31 deletions(-)
Signed-off-by: Ceri James <jamesceri@xxxxxxxxxxxxxx>
---
drivers/staging/bcm/Bcmchar.c | 111 +++++++++++++++++++++++++++++------------
1 files changed, 79 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c
index 1e2a713..703236c 100644
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@@ -369,7 +369,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
if ((((ULONG)sWrmBuffer.Register & 0x0F000000) != 0x0F000000) ||
((ULONG)sWrmBuffer.Register & 0x3)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Done On invalid Address : %x Access Denied.\n", (int)sWrmBuffer.Register);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "WRM Done On invalid Address : %x Access Denied.\n",
+ (int)sWrmBuffer.Register);
return -EINVAL;
}
@@ -425,7 +427,10 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
value = (1<<uiBit);
if (IsReqGpioIsLedInNVM(Adapter, value) == FALSE) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!", value);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL,
+ "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!",
+ value);
Status = -EINVAL;
break;
}
@@ -479,7 +484,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
case BCM_LED_THREAD_STATE_CHANGE_REQ: {
USER_THREAD_REQ threadReq = {0};
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "User made LED thread InActive");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "User made LED thread InActive");
if ((Adapter->IdleMode == TRUE) ||
(Adapter->bShutStatus == TRUE) ||
@@ -939,7 +945,8 @@ cntrlEnd:
case IOCTL_CHIP_RESET: {
INT NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
if (NVMAccess) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, " IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ " IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
return -EACCES;
}
@@ -985,11 +992,13 @@ cntrlEnd:
if (uiData) {
/* Allow All Packets */
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SWITCH_TRANSFER_MODE: ETH_PACKET_TUNNELING_MODE\n");
- Adapter->TransferMode = ETH_PACKET_TUNNELING_MODE;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "IOCTL_BCM_SWITCH_TRANSFER_MODE: ETH_PACKET_TUNNELING_MODE\n");
+ Adapter->TransferMode = ETH_PACKET_TUNNELING_MODE;
} else {
/* Allow IP only Packets */
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SWITCH_TRANSFER_MODE: IP_PACKET_ONLY_MODE\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "IOCTL_BCM_SWITCH_TRANSFER_MODE: IP_PACKET_ONLY_MODE\n");
Adapter->TransferMode = IP_PACKET_ONLY_MODE;
}
Status = STATUS_SUCCESS;
@@ -1148,7 +1157,9 @@ cntrlEnd:
if (((ULONG)pBulkBuffer->Register & 0x0F000000) != 0x0F000000 ||
((ULONG)pBulkBuffer->Register & 0x3)) {
kfree(pvBuffer);
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Done On invalid Address : %x Access Denied.\n", (int)pBulkBuffer->Register);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "WRM Done On invalid Address : %x Access Denied.\n",
+ (int)pBulkBuffer->Register);
Status = -EINVAL;
break;
}
@@ -1168,9 +1179,13 @@ cntrlEnd:
}
if (pBulkBuffer->SwapEndian == FALSE)
- Status = wrmWithLock(Adapter, (UINT)pBulkBuffer->Register, (PCHAR)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
+ Status = wrmWithLock(Adapter, (UINT)pBulkBuffer->Register,
+ (PCHAR)pBulkBuffer->Values,
+ IoBuffer.InputLength - 2*sizeof(ULONG));
else
- Status = wrmaltWithLock(Adapter, (UINT)pBulkBuffer->Register, (PUINT)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
+ Status = wrmaltWithLock(Adapter, (UINT)pBulkBuffer->Register,
+ (PUINT)pBulkBuffer->Values,
+ IoBuffer.InputLength - 2*sizeof(ULONG));
if (Status != STATUS_SUCCESS)
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Failed\n");
@@ -1269,7 +1284,8 @@ cntrlEnd:
memset(&tv0, 0, sizeof(struct timeval));
memset(&tv1, 0, sizeof(struct timeval));
if ((Adapter->eNVMType == NVM_FLASH) && (Adapter->uiFlashLayoutMajorVersion == 0)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "The Flash Control Section is Corrupted. Hence Rejection on NVM Read/Write\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "The Flash Control Section is Corrupted. Hence Rejection on NVM Read/Write\n");
return -EFAULT;
}
@@ -1299,7 +1315,10 @@ cntrlEnd:
return STATUS_FAILURE;
if (stNVMReadWrite.uiOffset > Adapter->uiNVMDSDSize - stNVMReadWrite.uiNumBytes) {
- /* BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Can't allow access beyond NVM Size: 0x%x 0x%x\n", stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes); */
+ /* BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ * "Can't allow access beyond NVM Size: 0x%x 0x%x\n",
+ * stNVMReadWrite.uiOffset,
+ * stNVMReadWrite.uiNumBytes); */
return STATUS_FAILURE;
}
@@ -1350,15 +1369,15 @@ cntrlEnd:
Adapter->bHeaderChangeAllowed = TRUE;
if (IsFlash2x(Adapter)) {
/*
- * New Requirement:-
- * DSD section updation will be allowed in two case:-
- * 1. if DSD sig is present in DSD header means dongle is ok and updation is fruitfull
- * 2. if point 1 failes then user buff should have DSD sig. this point ensures that if dongle is
- * corrupted then user space program first modify the DSD header with valid DSD sig so
- * that this as well as further write may be worthwhile.
+ * New Requirement:-
+ * DSD section updation will be allowed in two case:-
+ * 1. if DSD sig is present in DSD header means dongle is ok and updation is fruitfull
+ * 2. if point 1 failes then user buff should have DSD sig. this point ensures that if dongle is
+ * corrupted then user space program first modify the DSD header with valid DSD sig so
+ * that this as well as further write may be worthwhile.
*
- * This restriction has been put assuming that if DSD sig is corrupted, DSD
- * data won't be considered valid.
+ * This restriction has been put assuming that if DSD sig is corrupted, DSD
+ * data won't be considered valid.
*/
Status = BcmFlash2xCorruptSig(Adapter, Adapter->eActiveDSD);
@@ -1366,7 +1385,9 @@ cntrlEnd:
if (((stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) != Adapter->uiNVMDSDSize) ||
(stNVMReadWrite.uiNumBytes < SIGNATURE_SIZE)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ OSAL_DBG, DBG_LVL_ALL,
+ "DSD Sig is present neither in Flash nor User provided Input..");
up(&Adapter->NVMRdmWrmLock);
kfree(pReadData);
return Status;
@@ -1374,7 +1395,9 @@ cntrlEnd:
ulDSDMagicNumInUsrBuff = ntohl(*(PUINT)(pReadData + stNVMReadWrite.uiNumBytes - SIGNATURE_SIZE));
if (ulDSDMagicNumInUsrBuff != DSD_IMAGE_MAGIC_NUMBER) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ OSAL_DBG, DBG_LVL_ALL,
+ "DSD Sig is present neither in Flash nor User provided Input..");
up(&Adapter->NVMRdmWrmLock);
kfree(pReadData);
return Status;
@@ -1382,7 +1405,10 @@ cntrlEnd:
}
}
- Status = BeceemNVMWrite(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes, stNVMReadWrite.bVerify);
+ Status = BeceemNVMWrite(Adapter, (PUINT)pReadData,
+ stNVMReadWrite.uiOffset,
+ stNVMReadWrite.uiNumBytes,
+ stNVMReadWrite.bVerify);
if (IsFlash2x(Adapter))
BcmFlash2xWriteSig(Adapter, Adapter->eActiveDSD);
@@ -1397,7 +1423,9 @@ cntrlEnd:
}
do_gettimeofday(&tv1);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " timetaken by Write/read :%ld msec\n", (tv1.tv_sec - tv0.tv_sec)*1000 + (tv1.tv_usec - tv0.tv_usec)/1000);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ " timetaken by Write/read :%ld msec\n",
+ (tv1.tv_sec - tv0.tv_sec)*1000 + (tv1.tv_usec - tv0.tv_usec)/1000);
kfree(pReadData);
return STATUS_SUCCESS;
@@ -1469,7 +1497,10 @@ cntrlEnd:
/* Reading the data from Flash 2.x */
Status = BcmFlash2xBulkRead(Adapter, (PUINT)pReadBuff, sFlash2xRead.Section, ReadOffset, ReadBytes);
if (Status) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Flash 2x read err with Status :%d", Status);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ OSAL_DBG, DBG_LVL_ALL,
+ "Flash 2x read err with Status :%d",
+ Status);
break;
}
@@ -1477,7 +1508,10 @@ cntrlEnd:
Status = copy_to_user(OutPutBuff, pReadBuff, ReadBytes);
if (Status) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Copy to use failed with status :%d", Status);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ OSAL_DBG, DBG_LVL_ALL,
+ "Copy to use failed with status :%d",
+ Status);
up(&Adapter->NVMRdmWrmLock);
kfree(pReadBuff);
return -EFAULT;
@@ -1579,7 +1613,10 @@ cntrlEnd:
BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, pWriteBuff, WriteBytes);
/* Writing the data from Flash 2.x */
- Status = BcmFlash2xBulkWrite(Adapter, (PUINT)pWriteBuff, sFlash2xWrite.Section, WriteOffset, WriteBytes, sFlash2xWrite.bVerify);
+ Status = BcmFlash2xBulkWrite(Adapter, (PUINT)pWriteBuff,
+ sFlash2xWrite.Section,
+ WriteOffset, WriteBytes,
+ sFlash2xWrite.bVerify);
if (Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash 2x read err with Status :%d", Status);
@@ -1720,17 +1757,23 @@ cntrlEnd:
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "NOB :%x", sCopySectStrut.numOfBytes);
if (IsSectionExistInFlash(Adapter, sCopySectStrut.SrcSection) == FALSE) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Source Section<%x> does not exixt in Flash ", sCopySectStrut.SrcSection);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Source Section<%x> does not exixt in Flash ",
+ sCopySectStrut.SrcSection);
return -EINVAL;
}
if (IsSectionExistInFlash(Adapter, sCopySectStrut.DstSection) == FALSE) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Destinatio Section<%x> does not exixt in Flash ", sCopySectStrut.DstSection);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Destinatio Section<%x> does not exixt in Flash ",
+ sCopySectStrut.DstSection);
return -EINVAL;
}
if (sCopySectStrut.SrcSection == sCopySectStrut.DstSection) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Source and Destination section should be different");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL,
+ "Source and Destination section should be different");
return -EINVAL;
}
@@ -1830,7 +1873,9 @@ cntrlEnd:
SectOfset = BcmGetSectionValStartOffset(Adapter, eFlash2xSectionVal);
if (SectOfset == INVALID_OFFSET) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Provided Section val <%d> does not exixt in Flash 2.x", eFlash2xSectionVal);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Provided Section val <%d> does not exixt in Flash 2.x",
+ eFlash2xSectionVal);
return -EINVAL;
}
@@ -1949,7 +1994,9 @@ cntrlEnd:
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "copy of control bit mask failed from user space");
return -EFAULT;
}
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\n Got user defined cntrl msg bit mask :%lx", RxCntrlMsgBitMask);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "\n Got user defined cntrl msg bit mask :%lx",
+ RxCntrlMsgBitMask);
pTarang->RxCntrlMsgBitMask = RxCntrlMsgBitMask;
}
break;
--
1.7.5.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
