To improve the readability, add some whitespace to the subdevice init. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/dt3000.c | 67 ++++++++++++++++----------------- 1 file changed, 33 insertions(+), 34 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c index e29049e..347527f 100644 --- a/drivers/staging/comedi/drivers/dt3000.c +++ b/drivers/staging/comedi/drivers/dt3000.c @@ -817,50 +817,49 @@ static int dt3000_attach_pci(struct comedi_device *dev, s = &dev->subdevices[0]; dev->read_subdev = s; - /* ai subdevice */ - s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ; - s->n_chan = this_board->adchan; - s->insn_read = dt3k_ai_insn; - s->maxdata = (1 << this_board->adbits) - 1; - s->len_chanlist = 512; - s->range_table = &range_dt3000_ai; /* XXX */ - s->do_cmd = dt3k_ai_cmd; - s->do_cmdtest = dt3k_ai_cmdtest; - s->cancel = dt3k_ai_cancel; + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ; + s->n_chan = this_board->adchan; + s->insn_read = dt3k_ai_insn; + s->maxdata = (1 << this_board->adbits) - 1; + s->len_chanlist = 512; + s->range_table = &range_dt3000_ai; /* XXX */ + s->do_cmd = dt3k_ai_cmd; + s->do_cmdtest = dt3k_ai_cmdtest; + s->cancel = dt3k_ai_cancel; s = &dev->subdevices[1]; /* ao subsystem */ - s->type = COMEDI_SUBD_AO; - s->subdev_flags = SDF_WRITABLE; - s->n_chan = 2; - s->insn_read = dt3k_ao_insn_read; - s->insn_write = dt3k_ao_insn; - s->maxdata = (1 << this_board->dabits) - 1; - s->len_chanlist = 1; - s->range_table = &range_bipolar10; + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = 2; + s->insn_read = dt3k_ao_insn_read; + s->insn_write = dt3k_ao_insn; + s->maxdata = (1 << this_board->dabits) - 1; + s->len_chanlist = 1; + s->range_table = &range_bipolar10; s = &dev->subdevices[2]; /* dio subsystem */ - s->type = COMEDI_SUBD_DIO; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = 8; - s->insn_config = dt3k_dio_insn_config; - s->insn_bits = dt3k_dio_insn_bits; - s->maxdata = 1; - s->len_chanlist = 8; - s->range_table = &range_digital; + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 8; + s->insn_config = dt3k_dio_insn_config; + s->insn_bits = dt3k_dio_insn_bits; + s->maxdata = 1; + s->len_chanlist = 8; + s->range_table = &range_digital; s = &dev->subdevices[3]; /* mem subsystem */ - s->type = COMEDI_SUBD_MEMORY; - s->subdev_flags = SDF_READABLE; - s->n_chan = 0x1000; - s->insn_read = dt3k_mem_insn_read; - s->maxdata = 0xff; - s->len_chanlist = 1; - s->range_table = &range_unknown; + s->type = COMEDI_SUBD_MEMORY; + s->subdev_flags = SDF_READABLE; + s->n_chan = 0x1000; + s->insn_read = dt3k_mem_insn_read; + s->maxdata = 0xff; + s->len_chanlist = 1; + s->range_table = &range_unknown; #if 0 s = &dev->subdevices[4]; -- 1.7.11 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
