[PATCH 19/23] staging: comedi: me_daq: simplify analog output boardinfo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The boards supported by this driver either have analog outputs or don't
have them. Add a new boardinfo value, 'has_ao', to indicate this.

The boards that have analog outputs always have 4, 12-bit channels. Remove
the unnecessary boardinfo and just open-code the values in the subdevice
initialization.

The boards with analog outputs also share the same output range capabilities.
Rename the comedi_lrange to make it common for all board types.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/me_daq.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index 686a1c4..ceb5b82 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -139,7 +139,7 @@ static const struct comedi_lrange me_ai_range = {
 	}
 };
 
-static const struct comedi_lrange me2600_ao_range = {
+static const struct comedi_lrange me_ao_range = {
 	3, {
 		BIP_RANGE(10),
 		BIP_RANGE(5),
@@ -150,18 +150,14 @@ static const struct comedi_lrange me2600_ao_range = {
 struct me_board {
 	const char *name;
 	int device_id;
-	int ao_chans;
-	int ao_bits;
-	const struct comedi_lrange *ao_range;
+	int has_ao;
 };
 
 static const struct me_board me_boards[] = {
 	{
 		.name		= "me-2600i",
 		.device_id	= ME2600_DEVICE_ID,
-		.ao_chans	= 4,
-		.ao_bits	= 12,
-		.ao_range	= &me2600_ao_range,
+		.has_ao		= 1,
 	}, {
 		.name		= "me-2000i",
 		.device_id	= ME2000_DEVICE_ID,
@@ -631,13 +627,13 @@ static int me_attach_pci(struct comedi_device *dev, struct pci_dev *pcidev)
 	s->insn_read	= me_ai_insn_read;
 
 	s = &dev->subdevices[1];
-	if (board->ao_chans) {
+	if (board->has_ao) {
 		s->type		= COMEDI_SUBD_AO;
 		s->subdev_flags	= SDF_WRITEABLE | SDF_COMMON;
-		s->n_chan	= board->ao_chans;
-		s->maxdata	= (1 << board->ao_bits) - 1;
-		s->len_chanlist	= board->ao_chans;
-		s->range_table	= board->ao_range;
+		s->n_chan	= 4;
+		s->maxdata	= 0x0fff;
+		s->len_chanlist	= 4;
+		s->range_table	= &me_ao_range;
 		s->insn_read	= me_ao_insn_read;
 		s->insn_write	= me_ao_insn_write;
 	} else {
-- 
1.7.11

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux