This is a patch to the InterfaceIdleMode.c, InterfaceDld.c files that
fixes up a coding style errors found by the checkpatch.pl tool
Signed-off-by: Ilya Gorskin <revent82@xxxxxxxxx>
---
drivers/staging/bcm/InterfaceDld.c | 16 +--
drivers/staging/bcm/InterfaceIdleMode.c | 219 +++++++++++++-------------------
2 files changed, 99 insertions(+), 136 deletions(-)
diff --git a/drivers/staging/bcm/InterfaceDld.c b/drivers/staging/bcm/InterfaceDld.c
index 3a89e33..1810d4a 100644
--- a/drivers/staging/bcm/InterfaceDld.c
+++ b/drivers/staging/bcm/InterfaceDld.c
@@ -35,9 +35,9 @@ int InterfaceFileDownload(PVOID arg, struct file *flp, unsigned int on_chip_loc)
break;
}
/* BCM_DEBUG_PRINT_BUFFER(Adapter,DBG_TYPE_INITEXIT, MP_INIT,
- * DBG_LVL_ALL, buff,
- * MAX_TRANSFER_CTRL_BYTE_USB);
- */
+ * DBG_LVL_ALL, buff,
+ * MAX_TRANSFER_CTRL_BYTE_USB);
+ */
errno = InterfaceWRM(psIntfAdapter, on_chip_loc, buff, len);
if (errno) {
BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,
@@ -115,7 +115,7 @@ int InterfaceFileReadbackFromChip(PVOID arg, struct file *flp, unsigned int on_c
while (len) {
if (*(unsigned int *)&buff_readback[len] != *(unsigned int *)&buff[len]) {
BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Firmware Download is not proper %d", fw_down);
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Val from Binary %x, Val From Read Back %x ", *(unsigned int *)&buff[len], *(unsigned int*)&buff_readback[len]);
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Val from Binary %x, Val From Read Back %x ", *(unsigned int *)&buff[len], *(unsigned int *)&buff_readback[len]);
BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "len =%x!!!", len);
Status = -EIO;
goto exit;
@@ -218,7 +218,7 @@ static int bcm_compare_buff_contents(unsigned char *readbackbuff, unsigned char
while (len) {
if (*(unsigned int *)&readbackbuff[len] != *(unsigned int *)&buff[len]) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Firmware Download is not proper");
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Val from Binary %x, Val From Read Back %x ", *(unsigned int *)&buff[len], *(unsigned int*)&readbackbuff[len]);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Val from Binary %x, Val From Read Back %x ", *(unsigned int *)&buff[len], *(unsigned int *)&readbackbuff[len]);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "len =%x!!!", len);
retval = -EINVAL;
break;
@@ -235,9 +235,9 @@ int bcm_ioctl_fw_download(struct bcm_mini_adapter *Adapter, struct bcm_firmware_
PUCHAR buff = NULL;
/* Config File is needed for the Driver to download the Config file and
- * Firmware. Check for the Config file to be first to be sent from the
- * Application
- */
+ * Firmware. Check for the Config file to be first to be sent from the
+ * Application
+ */
atomic_set(&Adapter->uiMBupdate, FALSE);
if (!Adapter->bCfgDownloaded && psFwInfo->u32StartingAddress != CONFIG_BEGIN_ADDR) {
/* Can't Download Firmware. */
diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c
index 4f2f490..de48630 100644
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -42,161 +42,141 @@ send to f/w with in 200 ms after the Idle/Shutdown req issued
*/
-int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* puiBuffer)
+int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter,
+ unsigned int *puiBuffer)
{
int status = STATUS_SUCCESS;
unsigned int uiRegRead = 0;
int bytes;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"SubType of Message :0x%X", ntohl(*puiBuffer));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,
+ "SubType of Message :0x%X", ntohl(*puiBuffer));
- if(ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL," Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
- if(ntohl(*(puiBuffer+1)) == 0 )
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Got IDLE MODE WAKE UP Response From F/W");
+ if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
+ if (ntohl(*(puiBuffer+1)) == 0) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W");
- status = wrmalt (Adapter,SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
- if(status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
+ status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
+ if (status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
return status;
}
- if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
- {
+ if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
uiRegRead = 0x00000000 ;
- status = wrmalt (Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
- if(status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
+ status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
+ if (status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
return status;
}
}
- //Below Register should not br read in case of Manual and Protocol Idle mode.
- else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
- {
- //clear on read Register
+ /*Below Register should not br read in case
+ * of Manual and Protocol Idle mode.*/
+ else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
+ /*clear on read Register*/
bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
if (bytes < 0) {
status = bytes;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
return status;
}
- //clear on read Register
+ /*clear on read Register*/
bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead));
if (bytes < 0) {
status = bytes;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg1");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg1");
return status;
}
}
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");
- // Set Idle Mode Flag to False and Clear IdleMode reg.
+ /*Set Idle Mode Flag to False and Clear IdleMode reg.*/
Adapter->IdleMode = FALSE;
Adapter->bTriedToWakeUpFromlowPowerMode = FALSE;
wake_up(&Adapter->lowpower_mode_wait_queue);
- }
- else
- {
- if(TRUE == Adapter->IdleMode)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Device is already in Idle mode....");
+ } else {
+ if (TRUE == Adapter->IdleMode) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode....");
return status ;
}
uiRegRead = 0;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n");
- if (Adapter->chip_id== BCS220_2 ||
+ if (Adapter->chip_id == BCS220_2 ||
Adapter->chip_id == BCS220_2BC ||
- Adapter->chip_id== BCS250_BC ||
- Adapter->chip_id== BCS220_3)
- {
+ Adapter->chip_id == BCS250_BC ||
+ Adapter->chip_id == BCS220_3) {
bytes = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
if (bytes < 0) {
status = bytes;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
return status;
}
uiRegRead |= (1<<17);
- status = wrmalt (Adapter,HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
- if(status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
+ status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
+ if (status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
return status;
}
}
SendIdleModeResponse(Adapter);
}
- }
- else if(ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
- OverrideServiceFlowParams(Adapter,puiBuffer);
+ } else if (ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
+ OverrideServiceFlowParams(Adapter, puiBuffer);
}
return status;
}
static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int Pattern)
{
- int status = STATUS_SUCCESS;
+ int status = STATUS_SUCCESS;
unsigned int value;
unsigned int chip_id ;
- unsigned long timeout = 0 ,itr = 0;
+ unsigned long timeout = 0, itr = 0;
- int lenwritten = 0;
- unsigned char aucAbortPattern[8]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
+ int lenwritten = 0;
+ unsigned char aucAbortPattern[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
PS_INTERFACE_ADAPTER psInterfaceAdapter = Adapter->pvInterfaceAdapter;
- //Abort Bus suspend if its already suspended
- if((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend))
- {
+ /*Abort Bus suspend if its already suspended*/
+ if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) {
status = usb_autopm_get_interface(psInterfaceAdapter->interface);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Bus got wakeup..Aborting Idle mode... status:%d \n",status);
-
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status);
}
- if((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
- ||
- (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE))
- {
- //write the SW abort pattern.
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
- status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
- if(status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
+ if ((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) || (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) {
+ /*write the SW abort pattern.*/
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
+ status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
+ if (status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
return status;
}
}
- if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
- {
+ if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
value = 0x80000000;
- status = wrmalt(Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
- if(status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
+ status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
+ if (status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
return status;
}
- }
- else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
- {
+ } else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
/*
- * Get a Interrupt Out URB and send 8 Bytes Down
- * To be Done in Thread Context.
- * Not using Asynchronous Mechanism.
- */
+ * Get a Interrupt Out URB and send 8 Bytes Down
+ * To be Done in Thread Context.
+ * Not using Asynchronous Mechanism.
+ */
status = usb_interrupt_msg (psInterfaceAdapter->udev,
usb_sndintpipe(psInterfaceAdapter->udev,
psInterfaceAdapter->sIntrOut.int_out_endpointAddr),
@@ -204,43 +184,34 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
8,
&lenwritten,
5000);
- if(status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n",status);
+ if (status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status);
return status;
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
}
- //mdelay(25);
+ /*mdelay(25);*/
- timeout= jiffies + msecs_to_jiffies(50) ;
- while( timeout > jiffies )
- {
+ timeout = jiffies + msecs_to_jiffies(50) ;
+ while (timeout > jiffies) {
itr++ ;
rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT));
- if(0xbece3200==(chip_id&~(0xF0)))
- {
+ if (0xbece3200 == (chip_id&~(0xF0))) {
chip_id = chip_id&~(0xF0);
}
- if(chip_id == Adapter->chip_id)
+ if (chip_id == Adapter->chip_id)
break;
}
- if(timeout < jiffies )
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Not able to read chip-id even after 25 msec");
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Number of completed iteration to read chip-id :%lu", itr);
+ if (timeout < jiffies) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Not able to read chip-id even after 25 msec");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr);
}
- status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
- if(status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
+ status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
+ if (status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
return status;
}
}
@@ -249,13 +220,10 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter)
{
ULONG Status = 0;
- if(Adapter->bTriedToWakeUpFromlowPowerMode)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Writing Low Power Mode Abort pattern to the Device\n");
+ if (Adapter->bTriedToWakeUpFromlowPowerMode) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n");
Adapter->bTriedToWakeUpFromlowPowerMode = TRUE;
InterfaceAbortIdlemode(Adapter, Adapter->usIdleModePattern);
@@ -269,33 +237,28 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
INT Status = 0;
int bytes;
- if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
- {
- // clear idlemode interrupt.
+ if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
+ /* clear idlemode interrupt.*/
uiRegVal = 0;
- Status =wrmalt(Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
+ Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
return;
}
- }
-
- else
- {
+ } else {
- //clear Interrupt EP registers.
- bytes = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
+ /*clear Interrupt EP registers.*/
+ bytes = rdmalt(Adapter, iDEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
if (bytes < 0) {
Status = bytes;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
return;
}
- bytes = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
+ bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
if (bytes < 0) {
Status = bytes;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
return;
}
}
--
1.7.12
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
