Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options, and
the legacy 'attach' callback is not optional, remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/s626.c | 45 ++++-------------------------------
1 file changed, 4 insertions(+), 41 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index bac1445..eff7e96 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -32,11 +32,7 @@ Authors: Gianluca Palli <gpalli@xxxxxxxxxxxxx>,
Updated: Fri, 15 Feb 2008 10:28:42 +0000
Status: experimental
-Configuration options:
- [0] - PCI bus of device (optional)
- [1] - PCI slot of device (optional)
- If bus/slot is not specified, the first supported
- PCI device found will be used.
+Configuration options: not applicable, uses PCI auto config
INSN_CONFIG instructions:
analog input:
@@ -2442,35 +2438,7 @@ static void CountersInit(struct comedi_device *dev)
}
}
-static struct pci_dev *s626_find_pci(struct comedi_device *dev,
- struct comedi_devconfig *it)
-{
- struct pci_dev *pcidev = NULL;
- int bus = it->options[0];
- int slot = it->options[1];
- int i;
-
- do {
- pcidev = pci_get_subsys(PCI_VENDOR_ID_S626,
- PCI_DEVICE_ID_S626,
- PCI_SUBVENDOR_ID_S626,
- PCI_SUBDEVICE_ID_S626,
- pcidev);
-
- if ((bus || slot) && pcidev) {
- /* matches requested bus/slot */
- if (pcidev->bus->number == bus &&
- PCI_SLOT(pcidev->devfn) == slot)
- break;
- } else {
- break;
- }
- } while (1);
-
- return pcidev;
-}
-
-static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+static int s626_attach_pci(struct comedi_device *dev, struct pci_dev *pcidev)
{
/* uint8_t PollList; */
/* uint16_t AdcData; */
@@ -2487,11 +2455,7 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (alloc_private(dev, sizeof(struct s626_private)) < 0)
return -ENOMEM;
- devpriv->pdev = s626_find_pci(dev, it);
- if (!devpriv->pdev) {
- printk(KERN_ERR "s626_attach: Board not present!!!\n");
- return -ENODEV;
- }
+ devpriv->pdev = pcidev;
result = comedi_pci_enable(devpriv->pdev, "s626");
if (result < 0) {
@@ -2932,7 +2896,6 @@ static void s626_detach(struct comedi_device *dev)
if (devpriv->pdev) {
if (devpriv->got_regions)
comedi_pci_disable(devpriv->pdev);
- pci_dev_put(devpriv->pdev);
}
}
}
@@ -2940,7 +2903,7 @@ static void s626_detach(struct comedi_device *dev)
static struct comedi_driver s626_driver = {
.driver_name = "s626",
.module = THIS_MODULE,
- .attach = s626_attach,
+ .attach_pci = s626_attach_pci,
.detach = s626_detach,
};
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
