Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options. and
the legacy 'attach' callback is now optional, remove it.
Also, make the boardinfo 'name' unique for the different board types.
Use this name when requesting the PCI resources. Change the printk
at the end of the attach into a dev_info.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/me_daq.c | 88 ++++++++++++---------------------
1 file changed, 32 insertions(+), 56 deletions(-)
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index eeb493d..2ce0b14 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -50,8 +50,6 @@ Configuration options:
#define ME2600_FIRMWARE "me2600_firmware.bin"
-#define ME_DRIVER_NAME "me_daq"
-
#define PCI_VENDOR_ID_MEILHAUS 0x1402
#define ME2000_DEVICE_ID 0x2000
#define ME2600_DEVICE_ID 0x2600
@@ -192,8 +190,7 @@ struct me_board {
static const struct me_board me_boards[] = {
{
- /* -- ME-2600i -- */
- .name = ME_DRIVER_NAME,
+ .name = "me-2600i",
.device_id = ME2600_DEVICE_ID,
/* Analog Output */
.ao_channel_nbr = 4,
@@ -208,8 +205,7 @@ static const struct me_board me_boards[] = {
.dio_channel_nbr = 32,
},
{
- /* -- ME-2000i -- */
- .name = ME_DRIVER_NAME,
+ .name = "me-2000i",
.device_id = ME2000_DEVICE_ID,
/* Analog Output */
.ao_channel_nbr = 0,
@@ -617,44 +613,24 @@ static int me_reset(struct comedi_device *dev)
return 0;
}
-static struct pci_dev *me_find_pci_dev(struct comedi_device *dev,
- struct comedi_devconfig *it)
+static const void *me_find_boardinfo(struct comedi_device *dev,
+ struct pci_dev *pcidev)
{
const struct me_board *board;
- struct pci_dev *pcidev = NULL;
- int bus = it->options[0];
- int slot = it->options[1];
int i;
- for_each_pci_dev(pcidev) {
- if (bus || slot) {
- if (pcidev->bus->number != bus ||
- PCI_SLOT(pcidev->devfn) != slot)
- continue;
- }
- if (pcidev->vendor != PCI_VENDOR_ID_MEILHAUS)
- continue;
-
- for (i = 0; i < ARRAY_SIZE(me_boards); i++) {
- board = &me_boards[i];
- if (board->device_id != pcidev->device)
- continue;
-
- dev->board_ptr = board;
- return pcidev;
- }
+ for (i = 0; i < ARRAY_SIZE(me_boards); i++) {
+ board = &me_boards[i];
+ if (board->device_id == pcidev->device)
+ return board;
}
- dev_err(dev->class_dev,
- "No supported board found! (req. bus %d, slot %d)\n",
- bus, slot);
return NULL;
}
-static int me_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+static int me_attach_pci(struct comedi_device *dev, struct pci_dev *pcidev)
{
- struct pci_dev *pci_device;
+ const struct me_board *board;
struct comedi_subdevice *s;
- struct me_board *board;
resource_size_t plx_regbase_tmp;
unsigned long plx_regbase_size_tmp;
resource_size_t me_regbase_tmp;
@@ -664,29 +640,28 @@ static int me_attach(struct comedi_device *dev, struct comedi_devconfig *it)
resource_size_t regbase_tmp;
int result, error;
+ comedi_set_hw_dev(dev, &pcidev->dev);
+
+ board = me_find_boardinfo(dev, pcidev);
+ if (!board)
+ return -ENODEV;
+ dev->board_ptr = board;
+ dev->board_name = board->name;
+
/* Allocate private memory */
if (alloc_private(dev, sizeof(struct me_private_data)) < 0)
return -ENOMEM;
- pci_device = me_find_pci_dev(dev, it);
- if (!pci_device)
- return -EIO;
- comedi_set_hw_dev(dev, &pci_device->dev);
- board = (struct me_board *)dev->board_ptr;
-
/* Enable PCI device and request PCI regions */
- if (comedi_pci_enable(pci_device, ME_DRIVER_NAME) < 0) {
+ if (comedi_pci_enable(pcidev, dev->board_name) < 0) {
printk(KERN_ERR "comedi%d: Failed to enable PCI device and "
"request regions\n", dev->minor);
return -EIO;
}
- /* Set data in device structure */
- dev->board_name = board->name;
-
/* Read PLX register base address [PCI_BASE_ADDRESS #0]. */
- plx_regbase_tmp = pci_resource_start(pci_device, 0);
- plx_regbase_size_tmp = pci_resource_len(pci_device, 0);
+ plx_regbase_tmp = pci_resource_start(pcidev, 0);
+ plx_regbase_size_tmp = pci_resource_len(pcidev, 0);
dev_private->plx_regbase =
ioremap(plx_regbase_tmp, plx_regbase_size_tmp);
dev_private->plx_regbase_size = plx_regbase_size_tmp;
@@ -697,8 +672,8 @@ static int me_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* Read Swap base address [PCI_BASE_ADDRESS #5]. */
- swap_regbase_tmp = pci_resource_start(pci_device, 5);
- swap_regbase_size_tmp = pci_resource_len(pci_device, 5);
+ swap_regbase_tmp = pci_resource_start(pcidev, 5);
+ swap_regbase_size_tmp = pci_resource_len(pcidev, 5);
if (!swap_regbase_tmp)
printk(KERN_ERR "comedi%d: Swap not present\n", dev->minor);
@@ -712,20 +687,20 @@ static int me_attach(struct comedi_device *dev, struct comedi_devconfig *it)
plx_regbase_tmp = swap_regbase_tmp;
swap_regbase_tmp = regbase_tmp;
- result = pci_write_config_dword(pci_device,
+ result = pci_write_config_dword(pcidev,
PCI_BASE_ADDRESS_0,
plx_regbase_tmp);
if (result != PCIBIOS_SUCCESSFUL)
return -EIO;
- result = pci_write_config_dword(pci_device,
+ result = pci_write_config_dword(pcidev,
PCI_BASE_ADDRESS_5,
swap_regbase_tmp);
if (result != PCIBIOS_SUCCESSFUL)
return -EIO;
} else {
plx_regbase_tmp -= 0x80;
- result = pci_write_config_dword(pci_device,
+ result = pci_write_config_dword(pcidev,
PCI_BASE_ADDRESS_0,
plx_regbase_tmp);
if (result != PCIBIOS_SUCCESSFUL)
@@ -736,8 +711,8 @@ static int me_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* Read Meilhaus register base address [PCI_BASE_ADDRESS #2]. */
- me_regbase_tmp = pci_resource_start(pci_device, 2);
- me_regbase_size_tmp = pci_resource_len(pci_device, 2);
+ me_regbase_tmp = pci_resource_start(pcidev, 2);
+ me_regbase_size_tmp = pci_resource_len(pcidev, 2);
dev_private->me_regbase_size = me_regbase_size_tmp;
dev_private->me_regbase = ioremap(me_regbase_tmp, me_regbase_size_tmp);
if (!dev_private->me_regbase) {
@@ -791,8 +766,9 @@ static int me_attach(struct comedi_device *dev, struct comedi_devconfig *it)
s->insn_config = me_dio_insn_config;
s->io_bits = 0;
- printk(KERN_INFO "comedi%d: " ME_DRIVER_NAME " attached.\n",
- dev->minor);
+ dev_info(dev->class_dev, "%s: %s attached\n",
+ dev->driver->driver_name, dev->board_name);
+
return 0;
}
@@ -818,7 +794,7 @@ static void me_detach(struct comedi_device *dev)
static struct comedi_driver me_daq_driver = {
.driver_name = "me_daq",
.module = THIS_MODULE,
- .attach = me_attach,
+ .attach_pci = me_attach_pci,
.detach = me_detach,
};
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
