[PATCH 3/5] staging: comedi: usbdux: remove usbdux_attach

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This driver originally used the 'attach' method in order to get
the firmware for the device from the comedi_config utility. It
now uses request_firmware_nowait() in the usb_driver probe to
get this firmware.

Since this driver has an 'attach_usb' method in the comedi_driver,
the 'attach' method can be removed because it is now optional.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/usbdux.c | 55 ++-------------------------------
 1 file changed, 3 insertions(+), 52 deletions(-)

diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 7aac213..bc5fc5c 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -2293,10 +2293,8 @@ static void tidy_up(struct usbduxsub *usbduxsub_tmp)
 	usbduxsub_tmp->pwm_cmd_running = 0;
 }
 
-/* common part of attach and attach_usb */
 static int usbdux_attach_common(struct comedi_device *dev,
-				struct usbduxsub *udev,
-				void *aux_data, int aux_len)
+				struct usbduxsub *udev)
 {
 	int ret;
 	struct comedi_subdevice *s = NULL;
@@ -2306,10 +2304,6 @@ static int usbdux_attach_common(struct comedi_device *dev,
 	/* pointer back to the corresponding comedi device */
 	udev->comedidev = dev;
 
-	/* trying to upload the firmware into the chip */
-	if (aux_data)
-		firmwareUpload(udev, aux_data, aux_len);
-
 	dev->board_name = "usbdux";
 
 	/* set number of subdevices */
@@ -2429,48 +2423,6 @@ static int usbdux_attach_common(struct comedi_device *dev,
 	return 0;
 }
 
-/* is called when comedi-config is called */
-static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	int ret;
-	int index;
-	int i;
-	void *aux_data;
-	int aux_len;
-
-	dev->private = NULL;
-
-	aux_data = comedi_aux_data(it->options, 0);
-	aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH];
-	if (aux_data == NULL)
-		aux_len = 0;
-	else if (aux_len == 0)
-		aux_data = NULL;
-
-	down(&start_stop_sem);
-	/* find a valid device which has been detected by the probe function of
-	 * the usb */
-	index = -1;
-	for (i = 0; i < NUMUSBDUX; i++) {
-		if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) {
-			index = i;
-			break;
-		}
-	}
-
-	if (index < 0) {
-		printk(KERN_ERR
-		       "comedi%d: usbdux: error: attach failed, no usbdux devs connected to the usb bus.\n",
-		       dev->minor);
-		ret = -ENODEV;
-	} else
-		ret = usbdux_attach_common(dev, &usbduxsub[index],
-					   aux_data, aux_len);
-	up(&start_stop_sem);
-	return ret;
-}
-
-/* is called from comedi_usb_auto_config() */
 static int usbdux_attach_usb(struct comedi_device *dev,
 			     struct usb_interface *uinterf)
 {
@@ -2492,7 +2444,7 @@ static int usbdux_attach_usb(struct comedi_device *dev,
 		       dev->minor);
 		ret = -ENODEV;
 	} else
-		ret = usbdux_attach_common(dev, this_usbduxsub, NULL, 0);
+		ret = usbdux_attach_common(dev, this_usbduxsub);
 	up(&start_stop_sem);
 	return ret;
 }
@@ -2513,9 +2465,8 @@ static void usbdux_detach(struct comedi_device *dev)
 static struct comedi_driver usbdux_driver = {
 	.driver_name	= "usbdux",
 	.module		= THIS_MODULE,
-	.attach		= usbdux_attach,
-	.detach		= usbdux_detach,
 	.attach_usb	= usbdux_attach_usb,
+	.detach		= usbdux_detach,
 };
 
 static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
-- 
1.7.11

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux