The comedi_insn 'data' pointer is a __user pointer that is
passed into the kernel using an ioctl. The comedi core copies
this data to kernel space in do_insnlist_ioctl() and then
passes that kernel data to the drivers as a separate parameter.
The drivers never need to access the data through the insn->data
pointer.
This fixes a number of sparse warnings about:
warning: dereference of noderef expression
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/s526.c | 73 +++++++++++++++++------------------
1 file changed, 36 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index c89bd6c..43f5c7d 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -256,14 +256,13 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
subdev_channel); */
for (i = 0; i < MAX_GPCT_CONFIG_DATA; i++) {
- devpriv->s526_gpct_config[subdev_channel].data[i] =
- insn->data[i];
-/* printk("data[%d]=%x\n", i, insn->data[i]); */
+ devpriv->s526_gpct_config[subdev_channel].data[i] = data[i];
+/* printk("data[%d]=%x\n", i, data[i]); */
}
/* Check what type of Counter the user requested, data[0] contains */
/* the Application type */
- switch (insn->data[0]) {
+ switch (data[0]) {
case INSN_CONFIG_GPCT_QUADRATURE_ENCODER:
/*
data[0]: Application Type
@@ -307,7 +306,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
#if 1
/* Set Counter Mode Register */
- cmReg.value = insn->data[1] & 0xFFFF;
+ cmReg.value = data[1] & 0xFFFF;
/* printk("s526: Counter Mode register=%x\n", cmReg.value); */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
@@ -325,39 +324,39 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
cmReg.reg.countDirCtrl = 0;
/* data[1] contains GPCT_X1, GPCT_X2 or GPCT_X4 */
- if (insn->data[1] == GPCT_X2)
+ if (data[1] == GPCT_X2)
cmReg.reg.clockSource = 1;
- else if (insn->data[1] == GPCT_X4)
+ else if (data[1] == GPCT_X4)
cmReg.reg.clockSource = 2;
else
cmReg.reg.clockSource = 0;
/* When to take into account the indexpulse: */
- /*if (insn->data[2] == GPCT_IndexPhaseLowLow) {
- } else if (insn->data[2] == GPCT_IndexPhaseLowHigh) {
- } else if (insn->data[2] == GPCT_IndexPhaseHighLow) {
- } else if (insn->data[2] == GPCT_IndexPhaseHighHigh) {
+ /*if (data[2] == GPCT_IndexPhaseLowLow) {
+ } else if (data[2] == GPCT_IndexPhaseLowHigh) {
+ } else if (data[2] == GPCT_IndexPhaseHighLow) {
+ } else if (data[2] == GPCT_IndexPhaseHighHigh) {
}*/
/* Take into account the index pulse? */
- if (insn->data[3] == GPCT_RESET_COUNTER_ON_INDEX)
+ if (data[3] == GPCT_RESET_COUNTER_ON_INDEX)
/* Auto load with INDEX^ */
cmReg.reg.autoLoadResetRcap = 4;
/* Set Counter Mode Register */
- cmReg.value = (short)(insn->data[1] & 0xFFFF);
+ cmReg.value = (short)(data[1] & 0xFFFF);
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
/* Load the pre-load register high word */
- value = (short)((insn->data[2] >> 16) & 0xFFFF);
+ value = (short)((data[2] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
/* Load the pre-load register low word */
- value = (short)(insn->data[2] & 0xFFFF);
+ value = (short)(data[2] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
/* Write the Counter Control Register */
- if (insn->data[3] != 0) {
- value = (short)(insn->data[3] & 0xFFFF);
+ if (data[3] != 0) {
+ value = (short)(data[3] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
}
/* Reset the counter if it is software preload */
@@ -383,34 +382,34 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
SinglePulseGeneration;
/* Set Counter Mode Register */
- cmReg.value = (short)(insn->data[1] & 0xFFFF);
+ cmReg.value = (short)(data[1] & 0xFFFF);
cmReg.reg.preloadRegSel = 0; /* PR0 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
/* Load the pre-load register 0 high word */
- value = (short)((insn->data[2] >> 16) & 0xFFFF);
+ value = (short)((data[2] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
/* Load the pre-load register 0 low word */
- value = (short)(insn->data[2] & 0xFFFF);
+ value = (short)(data[2] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
/* Set Counter Mode Register */
- cmReg.value = (short)(insn->data[1] & 0xFFFF);
+ cmReg.value = (short)(data[1] & 0xFFFF);
cmReg.reg.preloadRegSel = 1; /* PR1 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
/* Load the pre-load register 1 high word */
- value = (short)((insn->data[3] >> 16) & 0xFFFF);
+ value = (short)((data[3] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
/* Load the pre-load register 1 low word */
- value = (short)(insn->data[3] & 0xFFFF);
+ value = (short)(data[3] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
/* Write the Counter Control Register */
- if (insn->data[4] != 0) {
- value = (short)(insn->data[4] & 0xFFFF);
+ if (data[4] != 0) {
+ value = (short)(data[4] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
}
break;
@@ -428,34 +427,34 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
PulseTrainGeneration;
/* Set Counter Mode Register */
- cmReg.value = (short)(insn->data[1] & 0xFFFF);
+ cmReg.value = (short)(data[1] & 0xFFFF);
cmReg.reg.preloadRegSel = 0; /* PR0 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
/* Load the pre-load register 0 high word */
- value = (short)((insn->data[2] >> 16) & 0xFFFF);
+ value = (short)((data[2] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
/* Load the pre-load register 0 low word */
- value = (short)(insn->data[2] & 0xFFFF);
+ value = (short)(data[2] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
/* Set Counter Mode Register */
- cmReg.value = (short)(insn->data[1] & 0xFFFF);
+ cmReg.value = (short)(data[1] & 0xFFFF);
cmReg.reg.preloadRegSel = 1; /* PR1 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
/* Load the pre-load register 1 high word */
- value = (short)((insn->data[3] >> 16) & 0xFFFF);
+ value = (short)((data[3] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
/* Load the pre-load register 1 low word */
- value = (short)(insn->data[3] & 0xFFFF);
+ value = (short)(data[3] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
/* Write the Counter Control Register */
- if (insn->data[4] != 0) {
- value = (short)(insn->data[4] & 0xFFFF);
+ if (data[4] != 0) {
+ value = (short)(data[4] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
}
break;
@@ -505,14 +504,14 @@ static int s526_gpct_winsn(struct comedi_device *dev,
pulse frequency on the selected source
*/
printk(KERN_INFO "S526: INSN_WRITE: PTG\n");
- if ((insn->data[1] > insn->data[0]) && (insn->data[0] > 0)) {
+ if ((data[1] > data[0]) && (data[0] > 0)) {
(devpriv->s526_gpct_config[subdev_channel]).data[0] =
- insn->data[0];
+ data[0];
(devpriv->s526_gpct_config[subdev_channel]).data[1] =
- insn->data[1];
+ data[1];
} else {
printk(KERN_ERR "s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n",
- insn->data[0], insn->data[1]);
+ data[0], data[1]);
return -EINVAL;
}
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
