Convert this PCI driver to use the comedi PCI auto config attach mechanism by adding an 'attach_pci' callback function. Since the driver does not require any external configuration options. and the legacy 'attach' callback is now optional, remove it. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/daqboard2000.c | 74 ++++++++++----------------- 1 file changed, 26 insertions(+), 48 deletions(-) diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index d85f58e..687ccb1 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -31,16 +31,10 @@ Devices: [IOTech] DAQBoard/2000 (daqboard2000) Much of the functionality of this driver was determined from reading the source code for the Windows driver. -The FPGA on the board requires initialization code, which can -be loaded by comedi_config using the -i -option. The initialization code is available from http://www.comedi.org -in the comedi_nonfree_firmware tarball. - -Configuration options: - [0] - PCI bus of device (optional) - [1] - PCI slot of device (optional) - If bus/slot is not specified, the first supported - PCI device found will be used. +The FPGA on the board requires fimware, which is available from +http://www.comedi.org in the comedi_nonfree_firmware tarball. + +Configuration options: not applicable, uses PCI auto config */ /* This card was obviously never intended to leave the Windows world, @@ -726,59 +720,45 @@ static int daqboard2000_8255_cb(int dir, int port, int data, } } -static struct pci_dev *daqboard2000_find_pci_dev(struct comedi_device *dev, - struct comedi_devconfig *it) +static const void *daqboard2000_find_boardinfo(struct comedi_device *dev, + struct pci_dev *pcidev) { - struct pci_dev *pcidev = NULL; - int bus = it->options[0]; - int slot = it->options[1]; + const struct daq200_boardtype *board; int i; - for_each_pci_dev(pcidev) { - if (bus || slot) { - if (bus != pcidev->bus->number || - slot != PCI_SLOT(pcidev->devfn)) - continue; - } - if (pcidev->vendor != PCI_VENDOR_ID_IOTECH || - pcidev->device != 0x0409 || - pcidev->subsystem_device != PCI_VENDOR_ID_IOTECH) - continue; - - for (i = 0; i < ARRAY_SIZE(boardtypes); i++) { - if (boardtypes[i].id != pcidev->subsystem_device) - continue; - dev->board_ptr = boardtypes + i; - return pcidev; - } + if (pcidev->subsystem_device != PCI_VENDOR_ID_IOTECH) + return NULL; + + for (i = 0; i < ARRAY_SIZE(boardtypes); i++) { + board = &boardtypes[i]; + if (pcidev->subsystem_device == board->id) + return board; } - dev_err(dev->class_dev, - "No supported board found! (req. bus %d, slot %d)\n", - bus, slot); return NULL; } -static int daqboard2000_attach(struct comedi_device *dev, - struct comedi_devconfig *it) +static int daqboard2000_attach_pci(struct comedi_device *dev, + struct pci_dev *pcidev) { - const struct daq200_boardtype *this_board; + const struct daq200_boardtype *board; struct daqboard2000_private *devpriv; - struct pci_dev *pcidev; struct comedi_subdevice *s; resource_size_t pci_base; int result; + comedi_set_hw_dev(dev, &pcidev->dev); + + board = daqboard2000_find_boardinfo(dev, pcidev); + if (!board) + return -ENODEV; + dev->board_ptr = board; + dev->board_name = board->name; + result = alloc_private(dev, sizeof(*devpriv)); if (result < 0) return -ENOMEM; devpriv = dev->private; - pcidev = daqboard2000_find_pci_dev(dev, it); - if (!pcidev) - return -EIO; - comedi_set_hw_dev(dev, &pcidev->dev); - this_board = comedi_board(dev); - result = comedi_pci_enable(pcidev, "daqboard2000"); if (result < 0) { dev_err(dev->class_dev, @@ -819,8 +799,6 @@ static int daqboard2000_attach(struct comedi_device *dev, printk("Interrupt after is: %x\n", interrupt); */ - dev->board_name = this_board->name; - s = &dev->subdevices[0]; /* ai subdevice */ s->type = COMEDI_SUBD_AI; @@ -872,7 +850,7 @@ static void daqboard2000_detach(struct comedi_device *dev) static struct comedi_driver daqboard2000_driver = { .driver_name = "daqboard2000", .module = THIS_MODULE, - .attach = daqboard2000_attach, + .attach_pci = daqboard2000_attach_pci, .detach = daqboard2000_detach, }; -- 1.7.11 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
