Whack all the line ending spaces so checkpatch.pl is happy. Signed-off-by: Daniel Cotey <puff65537@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/silicom/libbp_sd.h | 142 ++++++++++++++++++------------------- 1 file changed, 71 insertions(+), 71 deletions(-) diff --git a/drivers/staging/silicom/libbp_sd.h b/drivers/staging/silicom/libbp_sd.h index 8fc4006..cba9ba6 100644 --- a/drivers/staging/silicom/libbp_sd.h +++ b/drivers/staging/silicom/libbp_sd.h @@ -118,12 +118,12 @@ int get_bypass_slave_sd(int if_index); * *13 WD_CTL_CAP The interface has watchdog capabilities to turn to Bypass mode when not reset * for defined period of time. - * + * *14 WD_STATUS_CAP The interface can report on the watchdog status (Active/inactive) - * + * *15 WD_TIMEOUT_CAP The interface can report the time left till watchdog triggers to Bypass mode. - * - *16-31 RESERVED + * + *16-31 RESERVED * * **/ int get_bypass_caps_sd(int if_index); @@ -133,34 +133,34 @@ int get_bypass_caps_sd(int if_index); * @if_index: network device index * * Output: - * - * Set of numbers defining the various parameters of the watchdog capable + * + * Set of numbers defining the various parameters of the watchdog capable * to be set to as described bellow. * -1 - on failure (device not support Bypass or it's a slave device) - * + * * Bit feature description - * + * * 0-3 WD_MIN_TIME The interface WD minimal time period in 100mS units - * - * 4 WD_STEP_TIME The steps of the WD timer in + * + * 4 WD_STEP_TIME The steps of the WD timer in * 0 - for linear steps (WD_MIN_TIME * X) * 1 - for multiply by 2 from previous step (WD_MIN_TIME * 2^X) - * - * 5-8 WD_STEP_COUNT Number of steps the WD timer supports in 2^X + * + * 5-8 WD_STEP_COUNT Number of steps the WD timer supports in 2^X * (X bit available for defining the value) - * - * - * + * + * + * **/ int get_wd_set_caps_sd(int if_index); /** * set_bypass - set Bypass state * @if_index: network device index of the controlling device - * @bypass_mode: bypass mode (1=on, 0=off) + * @bypass_mode: bypass mode (1=on, 0=off) * Output: * 0 - on success - * -1 - on failure (device not support Bypass or it's a slave device) + * -1 - on failure (device not support Bypass or it's a slave device) **/ int set_bypass_sd(int if_index, int bypass_mode); @@ -169,7 +169,7 @@ int set_bypass_sd(int if_index, int bypass_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support Bypass or it's a slave device) + * -1 - on failure (device not support Bypass or it's a slave device) **/ int get_bypass_sd(int if_index); @@ -178,7 +178,7 @@ int get_bypass_sd(int if_index); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support Bypass or it's a slave device) + * -1 - on failure (device not support Bypass or it's a slave device) **/ int get_bypass_change_sd(int if_index); @@ -188,8 +188,8 @@ int get_bypass_change_sd(int if_index); * @dis_bypass: disable bypass(1=dis, 0=en) * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int set_dis_bypass_sd(int if_index, int dis_bypass); @@ -198,8 +198,8 @@ int set_dis_bypass_sd(int if_index, int dis_bypass); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (normal Bypass mode/ Disable bypass) - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int get_dis_bypass_sd(int if_index); @@ -208,9 +208,9 @@ int get_dis_bypass_sd(int if_index); * @if_index: network device index of the controlling device * @bypass_mode: bypass mode setting at power off state (1=BP en, 0=BP Dis) * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * 0 - on success + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int set_bypass_pwoff_sd(int if_index, int bypass_mode); @@ -219,8 +219,8 @@ int set_bypass_pwoff_sd(int if_index, int bypass_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (Disable bypass at power off state / normal Bypass mode) - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int get_bypass_pwoff_sd(int if_index); @@ -229,9 +229,9 @@ int get_bypass_pwoff_sd(int if_index); * @if_index: network device index of the controlling device * @bypass_mode: bypass mode setting at power up state (1=BP en, 0=BP Dis) * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * 0 - on success + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int set_bypass_pwup_sd(int if_index, int bypass_mode); @@ -240,8 +240,8 @@ int set_bypass_pwup_sd(int if_index, int bypass_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (Disable bypass at power up state / normal Bypass mode) - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int get_bypass_pwup_sd(int if_index); @@ -249,50 +249,50 @@ int get_bypass_pwup_sd(int if_index); * set_bypass_wd - Set watchdog state * @if_index: network device index of the controlling device * @ms_timeout: requested timeout (in ms units), 0 for disabling the watchdog timer - * @ms_timeout_set(output): requested timeout (in ms units), + * @ms_timeout_set(output): requested timeout (in ms units), * that the adapter supports and will be used by the watchdog * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * 0 - on success + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int set_bypass_wd_sd(int if_index, int ms_timeout, int *ms_timeout_set); /** * get_bypass_wd - Get watchdog state * @if_index: network device index of the controlling device - * @ms_timeout (output): WDT timeout (in ms units), + * @ms_timeout (output): WDT timeout (in ms units), * -1 for unknown wdt status * 0 if WDT is disabled * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int get_bypass_wd_sd(int if_index, int *ms_timeout_set); /** * get_wd_expire_time - Get watchdog expire * @if_index: network device index of the controlling device - * @ms_time_left (output): time left till watchdog time expire, + * @ms_time_left (output): time left till watchdog time expire, * -1 if WDT has expired * 0 if WDT is disabled * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device or unknown wdt status) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device or unknown wdt status) **/ int get_wd_expire_time_sd(int if_index, int *ms_time_left); /** * reset_bypass_wd_timer - Reset watchdog timer * @if_index: network device index of the controlling device - * + * * Output: * 1 - on success * 0 - watchdog is not configured - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device or unknown wdt status) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device or unknown wdt status) **/ int reset_bypass_wd_timer_sd(int if_index); @@ -300,64 +300,64 @@ int reset_bypass_wd_timer_sd(int if_index); * set_std_nic - Standard NIC mode of operation * @if_index: network device index of the controlling device * @nic_mode: 0/1 (Default Bypass mode / Standard NIC mode) - * + * * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int set_std_nic_sd(int if_index, int nic_mode); /** * get_std_nic - Get Standard NIC mode setting * @if_index: network device index of the controlling device - * + * * Output: * 0/1 (Default Bypass mode / Standard NIC mode) on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int get_std_nic_sd(int if_index); /** - * set_tx - set transmitter enable/disable + * set_tx - set transmitter enable/disable * @if_index: network device index of the controlling device * @tx_state: 0/1 (Transmit Disable / Transmit Enable) - * + * * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ) + * -1 - on failure (device is not capable of the operation ) **/ int set_tx_sd(int if_index, int tx_state); /** * get_tx - get transmitter state (disable / enable) * @if_index: network device index of the controlling device - * + * * Output: * 0/1 (ransmit Disable / Transmit Enable) on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass) **/ int get_tx_sd(int if_index); /** - * set_tpl - set TPL enable/disable + * set_tpl - set TPL enable/disable * @if_index: network device index of the controlling device * @tx_state: 0/1 (TPL Disable / TPL Enable) - * + * * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ) + * -1 - on failure (device is not capable of the operation ) **/ int set_tpl_sd(int if_index, int tpl_state); /** * get_tpl - get TPL state (disable / enable) * @if_index: network device index of the controlling device - * + * * Output: * 0/1 (TPL Disable / TPL Enable) on success - * -1 - on failure (device is not capable of the operation) + * -1 - on failure (device is not capable of the operation) **/ int get_tpl_sd(int if_index); @@ -368,10 +368,10 @@ int set_bp_hw_reset_sd(int if_index, int status); /** * set_tap - set TAP state * @if_index: network device index of the controlling device - * @tap_mode: 1 tap mode , 0 normal nic mode + * @tap_mode: 1 tap mode , 0 normal nic mode * Output: * 0 - on success - * -1 - on failure (device not support TAP or it's a slave device) + * -1 - on failure (device not support TAP or it's a slave device) **/ int set_tap_sd(int if_index, int tap_mode); @@ -380,7 +380,7 @@ int set_tap_sd(int if_index, int tap_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support TAP or it's a slave device) + * -1 - on failure (device not support TAP or it's a slave device) **/ int get_tap_sd(int if_index); @@ -389,7 +389,7 @@ int get_tap_sd(int if_index); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support TAP or it's a slave device) + * -1 - on failure (device not support TAP or it's a slave device) **/ int get_tap_change_sd(int if_index); @@ -399,8 +399,8 @@ int get_tap_change_sd(int if_index); * @dis_tap: disable tap(1=dis, 0=en) * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support TAP - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support TAP + * or it's a slave device) **/ int set_dis_tap_sd(int if_index, int dis_tap); @@ -409,8 +409,8 @@ int set_dis_tap_sd(int if_index, int dis_tap); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (normal TAP mode/ Disable TAP) - * -1 - on failure (device is not capable of the operation ordevice not support TAP - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support TAP + * or it's a slave device) **/ int get_dis_tap_sd(int if_index); @@ -419,7 +419,7 @@ int get_dis_tap_sd(int if_index); * @if_index: network device index of the controlling device * @bypass_mode: tap mode setting at power up state (1=TAP en, 0=TAP Dis) * Output: - * 0 - on success + * 0 - on success * -1 - on failure (device is not capable of the operation ordevice not support TAP * or it's a slave device) **/ -- 1.7.11.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
