The analog inputs and outputs for this driver use the same table
to set the analog range. Remove the boardinfo for it and just
reference the table directly.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/icp_multi.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index 3a2fc74..95262c7 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -130,7 +130,6 @@ struct boardtype {
int iorange; /* I/O range len */
char have_irq; /* 1=card support IRQ */
char cardtype; /* 0=ICP Multi */
- const char *rangecode; /* range codes for programming */
};
struct icp_multi_private {
@@ -212,7 +211,7 @@ static void setup_channel_list(struct comedi_device *dev,
devpriv->AdcCmdStatus |= (chanprog << 8);
/* Get range for current channel */
- range = this_board->rangecode[CR_RANGE(chanlist[i])];
+ range = range_codes_analog[CR_RANGE(chanlist[i])];
/* Set range. bits 4-5 */
devpriv->AdcCmdStatus |= range;
@@ -351,7 +350,7 @@ static int icp_multi_insn_write_ao(struct comedi_device *dev,
/* Bit 5 = 1 : 10V */
/* Bits 8-9 : Channel number */
devpriv->DacCmdStatus &= 0xfccf;
- devpriv->DacCmdStatus |= this_board->rangecode[range];
+ devpriv->DacCmdStatus |= range_codes_analog[range];
devpriv->DacCmdStatus |= (chan << 8);
writew(devpriv->DacCmdStatus, devpriv->io_addr + ICP_MULTI_DAC_CSR);
@@ -879,7 +878,6 @@ static const struct boardtype boardtypes[] = {
.iorange = IORANGE_ICP_MULTI,
.have_irq = 1,
.cardtype = TYPE_ICP_MULTI,
- .rangecode = range_codes_analog,
},
};
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
