This define enables a bunch of function trace messages. These
should be removed in the final driver.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/icp_multi.c | 129 +----------------------------
1 file changed, 3 insertions(+), 126 deletions(-)
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index e0aac68..3567a48 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -60,8 +60,6 @@ Options:
#define PCI_DEVICE_ID_ICP_MULTI 0x8000
-#define ICP_MULTI_EXTDEBUG
-
/* Hardware types of the cards */
#define TYPE_ICP_MULTI 0
@@ -194,10 +192,6 @@ static void setup_channel_list(struct comedi_device *dev,
unsigned int i, range, chanprog;
unsigned int diff;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: setup_channel_list(...,%d)\n", n_chan);
-#endif
devpriv->act_chanlist_len = n_chan;
devpriv->act_chanlist_pos = 0;
@@ -235,14 +229,7 @@ static void setup_channel_list(struct comedi_device *dev,
/* Output channel, range, mode to ICP Multi */
writew(devpriv->AdcCmdStatus,
devpriv->io_addr + ICP_MULTI_ADC_CSR);
-
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "GS: %2d. [%4x]=%4x %4x\n", i, chanprog, range,
- devpriv->act_chanlist[i]);
-#endif
}
-
}
/*
@@ -269,9 +256,6 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
{
int n, timeout;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG "icp multi EDBG: BGN: icp_multi_insn_read_ai(...)\n");
-#endif
/* Disable A/D conversion ready interrupt */
devpriv->IntEnable &= ~ADC_READY;
writew(devpriv->IntEnable, devpriv->io_addr + ICP_MULTI_INT_EN);
@@ -283,12 +267,6 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
/* Set up appropriate channel, mode and range data, for specified ch */
setup_channel_list(dev, s, &insn->chanspec, 1);
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG "icp_multi A ST=%4x IO=%p\n",
- readw(devpriv->io_addr + ICP_MULTI_ADC_CSR),
- devpriv->io_addr + ICP_MULTI_ADC_CSR);
-#endif
-
for (n = 0; n < insn->n; n++) {
/* Set start ADC bit */
devpriv->AdcCmdStatus |= ADC_ST;
@@ -296,18 +274,8 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
devpriv->io_addr + ICP_MULTI_ADC_CSR);
devpriv->AdcCmdStatus &= ~ADC_ST;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG "icp multi B n=%d ST=%4x\n", n,
- readw(devpriv->io_addr + ICP_MULTI_ADC_CSR));
-#endif
-
udelay(1);
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG "icp multi C n=%d ST=%4x\n", n,
- readw(devpriv->io_addr + ICP_MULTI_ADC_CSR));
-#endif
-
/* Wait for conversion to complete, or get fed up waiting */
timeout = 100;
while (timeout--) {
@@ -315,15 +283,6 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
ICP_MULTI_ADC_CSR) & ADC_BSY))
goto conv_finish;
-#ifdef ICP_MULTI_EXTDEBUG
- if (!(timeout % 10))
- printk(KERN_DEBUG
- "icp multi D n=%d tm=%d ST=%4x\n", n,
- timeout,
- readw(devpriv->io_addr +
- ICP_MULTI_ADC_CSR));
-#endif
-
udelay(1);
}
@@ -342,11 +301,6 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
/* Clear data received */
data[n] = 0;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: END: icp_multi_insn_read_ai(...) n=%d\n",
- n);
-#endif
return -ETIME;
conv_finish:
@@ -362,10 +316,6 @@ conv_finish:
devpriv->IntStatus |= ADC_READY;
writew(devpriv->IntStatus, devpriv->io_addr + ICP_MULTI_INT_STAT);
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: END: icp_multi_insn_read_ai(...) n=%d\n", n);
-#endif
return n;
}
@@ -393,10 +343,6 @@ static int icp_multi_insn_write_ao(struct comedi_device *dev,
{
int n, chan, range, timeout;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: BGN: icp_multi_insn_write_ao(...)\n");
-#endif
/* Disable D/A conversion ready interrupt */
devpriv->IntEnable &= ~DAC_READY;
writew(devpriv->IntEnable, devpriv->io_addr + ICP_MULTI_INT_EN);
@@ -429,15 +375,6 @@ static int icp_multi_insn_write_ao(struct comedi_device *dev,
ICP_MULTI_DAC_CSR) & DAC_BSY))
goto dac_ready;
-#ifdef ICP_MULTI_EXTDEBUG
- if (!(timeout % 10))
- printk(KERN_DEBUG
- "icp multi A n=%d tm=%d ST=%4x\n", n,
- timeout,
- readw(devpriv->io_addr +
- ICP_MULTI_DAC_CSR));
-#endif
-
udelay(1);
}
@@ -456,11 +393,6 @@ static int icp_multi_insn_write_ao(struct comedi_device *dev,
/* Clear data received */
devpriv->ao_data[chan] = 0;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: END: icp_multi_insn_write_ao(...) n=%d\n",
- n);
-#endif
return -ETIME;
dac_ready:
@@ -477,10 +409,6 @@ dac_ready:
devpriv->ao_data[chan] = data[n];
}
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: END: icp_multi_insn_write_ao(...) n=%d\n", n);
-#endif
return n;
}
@@ -567,10 +495,6 @@ static int icp_multi_insn_bits_do(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG "icp multi EDBG: BGN: icp_multi_insn_bits_do(...)\n");
-#endif
-
if (data[0]) {
s->state &= ~data[0];
s->state |= (data[0] & data[1]);
@@ -582,9 +506,6 @@ static int icp_multi_insn_bits_do(struct comedi_device *dev,
data[1] = readw(devpriv->io_addr + ICP_MULTI_DI);
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG "icp multi EDBG: END: icp_multi_insn_bits_do(...)\n");
-#endif
return insn->n;
}
@@ -659,24 +580,12 @@ static irqreturn_t interrupt_service_icp_multi(int irq, void *d)
struct comedi_device *dev = d;
int int_no;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: BGN: interrupt_service_icp_multi(%d,...)\n",
- irq);
-#endif
-
/* Is this interrupt from our board? */
int_no = readw(devpriv->io_addr + ICP_MULTI_INT_STAT) & Status_IRQ;
if (!int_no)
/* No, exit */
return IRQ_NONE;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: interrupt_service_icp_multi() ST: %4x\n",
- readw(devpriv->io_addr + ICP_MULTI_INT_STAT));
-#endif
-
/* Determine which interrupt is active & handle it */
switch (int_no) {
case ADC_READY:
@@ -700,10 +609,6 @@ static irqreturn_t interrupt_service_icp_multi(int irq, void *d)
}
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: END: interrupt_service_icp_multi(...)\n");
-#endif
return IRQ_HANDLED;
}
@@ -734,10 +639,6 @@ static int check_channel_list(struct comedi_device *dev,
{
unsigned int i;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: check_channel_list(...,%d)\n", n_chan);
-#endif
/* Check that we at least have one channel to check */
if (n_chan < 1) {
comedi_error(dev, "range/channel list is empty!");
@@ -783,10 +684,6 @@ static int icp_multi_reset(struct comedi_device *dev)
{
unsigned int i;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp_multi EDBG: BGN: icp_multi_reset(...)\n");
-#endif
/* Clear INT enables and requests */
writew(0, devpriv->io_addr + ICP_MULTI_INT_EN);
writew(0x00ff, devpriv->io_addr + ICP_MULTI_INT_STAT);
@@ -815,10 +712,6 @@ static int icp_multi_reset(struct comedi_device *dev)
/* Digital outputs to 0 */
writew(0, devpriv->io_addr + ICP_MULTI_DO);
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: END: icp_multi_reset(...)\n");
-#endif
return 0;
}
@@ -841,15 +734,8 @@ static int icp_multi_attach(struct comedi_device *dev,
return ret;
/* Initialise list of PCI cards in system, if not already done so */
- if (pci_list_builded++ == 0) {
- pci_card_list_init(PCI_VENDOR_ID_ICP,
-#ifdef ICP_MULTI_EXTDEBUG
- 1
-#else
- 0
-#endif
- );
- }
+ if (pci_list_builded++ == 0)
+ pci_card_list_init(PCI_VENDOR_ID_ICP, 0);
printk(KERN_WARNING
"Anne's comedi%d: icp_multi: board=%s", dev->minor,
@@ -883,11 +769,6 @@ static int icp_multi_attach(struct comedi_device *dev,
printk(KERN_WARNING "ioremap failed.\n");
return -ENOMEM;
}
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "0x%08llx mapped to %p, ", (unsigned long long)iobase,
- devpriv->io_addr);
-#endif
dev->board_name = this_board->name;
@@ -952,7 +833,7 @@ static int icp_multi_attach(struct comedi_device *dev,
s->n_chan = this_board->n_aochan;
s->maxdata = this_board->ao_maxdata;
s->len_chanlist = this_board->n_aochan;
- s->range_table = this_board->rangelist_ao;
+ s->range_table = &range_analog;
s->insn_write = icp_multi_insn_write_ao;
s->insn_read = icp_multi_insn_read_ao;
subdev++;
@@ -1000,10 +881,6 @@ static int icp_multi_attach(struct comedi_device *dev,
devpriv->valid = 1;
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG "icp multi EDBG: END: icp_multi_attach(...)\n");
-#endif
-
return 0;
}
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
