When attaching a PCI device manually via the comedi driver `attach` hook (`dio200_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG` ioctl), its reference count is incremented in the `for_each_pci_dev` loop (in `dio200_find_pci_dev()`). It is decremented when the `detach` hook (`dio200_detach()`) is called to detach the device. However, when the PCI device is attached automatically via the `attach_pci` hook (`dio200_attach_pci()`, called at probe time via `comedi_pci_auto_config()`) it's reference count is not incremented so there will be an unmatched decrement when detaching the device. Increment the PCI device reference count in `dio200_attach_pci()` to correct the mismatch. Once support for manual configuration has been removed from this driver, the calls to `pci_dev_get()` and `pci_dev_put()` can be removed. Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx> --- drivers/staging/comedi/drivers/amplc_dio200.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c index 9c8fbf1..5858892 100644 --- a/drivers/staging/comedi/drivers/amplc_dio200.c +++ b/drivers/staging/comedi/drivers/amplc_dio200.c @@ -1421,6 +1421,13 @@ static int __devinit dio200_attach_pci(struct comedi_device *dev, dev_err(dev->class_dev, "BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in dio200_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via dio200_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return dio200_pci_common_attach(dev, pci_dev); } -- 1.7.12 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
