Currently the ADLink PCI-7230 and PCI-7432 Isolated Digital
I/O Boards are supported using two drivers (adl_pci7230 and
adl_pci7432). These drivers are very similar and only differ
in the total number of di/do channels provided.
This driver combines the support for both boards into one
common driver. In addition, it adds PCI PnP support for the
other boards in the ADLink PCI-723x and PCI-743x series.
This driver only supports the comedi PCI auto config attach
mechanism. The legacy attach using the comedi_config utility
is not supported or required by this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/Kconfig | 11 +
drivers/staging/comedi/drivers/Makefile | 1 +
drivers/staging/comedi/drivers/adl_pci7x3x.c | 342 +++++++++++++++++++++++++++
3 files changed, 354 insertions(+)
create mode 100644 drivers/staging/comedi/drivers/adl_pci7x3x.c
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 6cee785..d8b0065 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -676,6 +676,17 @@ config COMEDI_ADL_PCI6208
To compile this driver as a module, choose M here: the module will be
called adl_pci6208.
+config COMEDI_ADL_PCI7X3X
+ tristate "ADLink PCI-723X/743X isolated digital i/o board support"
+ ---help---
+ Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
+ Supported boards include the 32-channel PCI-7230 (16 in/16 out),
+ PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
+ PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
+
+ To compile this driver as a module, choose M here: the module will be
+ called adl_pci7x3x.
+
config COMEDI_ADL_PCI7230
tristate "ADLink PCI-7230 digital io board support"
---help---
diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile
index 57b19e4..d13d5a9 100644
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_COMEDI_ADDI_APCI_3120) += addi_apci_3120.o
obj-$(CONFIG_COMEDI_ADDI_APCI_3501) += addi_apci_3501.o
obj-$(CONFIG_COMEDI_ADDI_APCI_3XXX) += addi_apci_3xxx.o
obj-$(CONFIG_COMEDI_ADL_PCI6208) += adl_pci6208.o
+obj-$(CONFIG_COMEDI_ADL_PCI7X3X) += adl_pci7x3x.o
obj-$(CONFIG_COMEDI_ADL_PCI7230) += adl_pci7230.o
obj-$(CONFIG_COMEDI_ADL_PCI7296) += adl_pci7296.o
obj-$(CONFIG_COMEDI_ADL_PCI7432) += adl_pci7432.o
diff --git a/drivers/staging/comedi/drivers/adl_pci7x3x.c b/drivers/staging/comedi/drivers/adl_pci7x3x.c
new file mode 100644
index 0000000..990670a
--- /dev/null
+++ b/drivers/staging/comedi/drivers/adl_pci7x3x.c
@@ -0,0 +1,342 @@
+/*
+ * COMEDI driver for the ADLINK PCI-723x/743x series boards.
+ * Copyright (C) 2012 H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
+ *
+ * Based on the adl_pci7230 driver written by:
+ * David Fernandez <dfcastelao@xxxxxxxxx>
+ * and the adl_pci7432 driver written by:
+ * Michel Lachaine <mike@xxxxxxxxxxxxxxx>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+Driver: adl_pci7x3x
+Description: 32/64-Channel Isolated Digital I/O Boards
+Devices: (ADLink) PCI-7230 [adl_pci7230] - 16 input / 16 output
+ (ADLink) PCI-7233 [adl_pci7233] - 32 input
+ (ADLink) PCI-7234 [adl_pci7234] - 32 output
+ (ADLink) PCI-7432 [adl_pci7432] - 32 input / 32 output
+ (ADLink) PCI-7433 [adl_pci7433] - 64 input
+ (ADLink) PCI-7434 [adl_pci7434] - 64 output
+Author: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
+Updated: Thu, 02 Aug 2012 14:27:46 -0700
+Status: untested
+
+This driver only attaches using the PCI PnP auto config support
+in the comedi core. The module parameter 'comedi_autoconfig'
+must be 1 (default) to enable this feature. The COMEDI_DEVCONFIG
+ioctl, used by the comedi_config utility, is not supported by
+this driver.
+
+The PCI-7230, PCI-7432 and PCI-7433 boards also support external
+interrupt signals on digital input channels 0 and 1. The PCI-7233
+has dual-interrupt sources for change-of-state (COS) on any 16
+digital input channels of LSB and for COS on any 16 digital input
+lines of MSB. Interrupts are not currently supported by this
+driver.
+
+Configuration Options: not applicable
+*/
+
+#include "../comedidev.h"
+
+/*
+ * PCI Device ID's supported by this driver
+ */
+#define PCI_DEVICE_ID_PCI7230 0x7230
+#define PCI_DEVICE_ID_PCI7233 0x7233
+#define PCI_DEVICE_ID_PCI7234 0x7234
+#define PCI_DEVICE_ID_PCI7432 0x7432
+#define PCI_DEVICE_ID_PCI7433 0x7433
+#define PCI_DEVICE_ID_PCI7434 0x7434
+
+/*
+ * Register I/O map (32-bit access only)
+ */
+#define PCI7X3X_DIO_REG 0x00
+#define PCI743X_DIO_REG 0x04
+
+struct adl_pci7x3x_boardinfo {
+ const char *name;
+ unsigned short device;
+ int nsubdevs;
+ int di_nchan;
+ int do_nchan;
+};
+
+static const struct adl_pci7x3x_boardinfo adl_pci7x3x_boards[] = {
+ {
+ .name = "adl_pci7230",
+ .device = PCI_DEVICE_ID_PCI7230,
+ .nsubdevs = 2,
+ .di_nchan = 16,
+ .do_nchan = 16,
+ }, {
+ .name = "adl_pci7233",
+ .device = PCI_DEVICE_ID_PCI7233,
+ .nsubdevs = 1,
+ .di_nchan = 32,
+ }, {
+ .name = "adl_pci7234",
+ .device = PCI_DEVICE_ID_PCI7234,
+ .nsubdevs = 1,
+ .do_nchan = 32,
+ }, {
+ .name = "adl_pci7432",
+ .device = PCI_DEVICE_ID_PCI7432,
+ .nsubdevs = 2,
+ .di_nchan = 32,
+ .do_nchan = 32,
+ }, {
+ .name = "adl_pci7433",
+ .device = PCI_DEVICE_ID_PCI7433,
+ .nsubdevs = 2,
+ .di_nchan = 64,
+ }, {
+ .name = "adl_pci7434",
+ .device = PCI_DEVICE_ID_PCI7434,
+ .nsubdevs = 2,
+ .do_nchan = 64,
+ }
+};
+
+static int adl_pci7x3x_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned int reg = (unsigned int)s->private;
+ unsigned int mask = data[0];
+ unsigned int bits = data[1];
+
+ if (mask) {
+ s->state &= ~mask;
+ s->state |= (bits & mask);
+
+ outl(s->state, dev->iobase + reg);
+ }
+
+ /*
+ * NOTE: The output register is not readable.
+ * This returned state will not be correct until all the
+ * outputs have been updated.
+ */
+ data[1] = s->state;
+
+ return insn->n;
+}
+
+static int adl_pci7x3x_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned int reg = (unsigned int)s->private;
+
+ data[1] = inl(dev->iobase + reg);
+
+ return insn->n;
+}
+
+static const void *adl_pci7x3x_find_boardinfo(struct comedi_device *dev,
+ struct pci_dev *pcidev)
+{
+ const struct adl_pci7x3x_boardinfo *board;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(adl_pci7x3x_boards); i++) {
+ board = &adl_pci7x3x_boards[i];
+ if (pcidev->device == board->device)
+ return board;
+ }
+ return NULL;
+}
+
+static int adl_pci7x3x_attach_pci(struct comedi_device *dev,
+ struct pci_dev *pcidev)
+{
+ const struct adl_pci7x3x_boardinfo *board;
+ struct comedi_subdevice *s;
+ int subdev;
+ int nchan;
+ int ret;
+
+ comedi_set_hw_dev(dev, &pcidev->dev);
+
+ board = adl_pci7x3x_find_boardinfo(dev, pcidev);
+ if (!board)
+ return -ENODEV;
+ dev->board_ptr = board;
+ dev->board_name = board->name;
+
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
+ dev->iobase = pci_resource_start(pcidev, 2);
+
+ /*
+ * One or two subdevices are setup by this driver depending on
+ * the number of digital inputs and/or outputs provided by the
+ * board. Each subdevice has a maximum of 32 channels.
+ *
+ * PCI-7230 - 2 subdevices: 0 - 16 input, 1 - 16 output
+ * PCI-7233 - 1 subdevice: 0 - 32 input
+ * PCI-7234 - 1 subdevice: 0 - 32 output
+ * PCI-7432 - 2 subdevices: 0 - 32 input, 1 - 32 output
+ * PCI-7433 - 2 subdevices: 0 - 32 input, 1 - 32 input
+ * PCI-7434 - 2 subdevices: 0 - 32 output, 1 - 32 output
+ */
+ ret = comedi_alloc_subdevices(dev, board->nsubdevs);
+ if (ret)
+ return ret;
+
+ subdev = 0;
+
+ if (board->di_nchan) {
+ nchan = min(board->di_nchan, 32);
+
+ s = dev->subdevices + subdev;
+ /* Isolated digital inputs 0 to 15/31 */
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = nchan;
+ s->maxdata = 1;
+ s->insn_bits = adl_pci7x3x_di_insn_bits;
+ s->range_table = &range_digital;
+
+ s->private = (void *)PCI7X3X_DIO_REG;
+
+ subdev++;
+
+ nchan = board->di_nchan - nchan;
+ if (nchan) {
+ s = dev->subdevices + subdev;
+ /* Isolated digital inputs 32 to 63 */
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = nchan;
+ s->maxdata = 1;
+ s->insn_bits = adl_pci7x3x_di_insn_bits;
+ s->range_table = &range_digital;
+
+ s->private = (void *)PCI743X_DIO_REG;
+
+ subdev++;
+ }
+ }
+
+ if (board->do_nchan) {
+ nchan = min(board->do_nchan, 32);
+
+ s = dev->subdevices + subdev;
+ /* Isolated digital outputs 0 to 15/31 */
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = nchan;
+ s->maxdata = 1;
+ s->insn_bits = adl_pci7x3x_do_insn_bits;
+ s->range_table = &range_digital;
+
+ s->private = (void *)PCI7X3X_DIO_REG;
+
+ subdev++;
+
+ nchan = board->do_nchan - nchan;
+ if (nchan) {
+ s = dev->subdevices + subdev;
+ /* Isolated digital outputs 32 to 63 */
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = nchan;
+ s->maxdata = 1;
+ s->insn_bits = adl_pci7x3x_do_insn_bits;
+ s->range_table = &range_digital;
+
+ s->private = (void *)PCI743X_DIO_REG;
+
+ subdev++;
+ }
+ }
+
+ dev_info(dev->class_dev, "%s attached (%d inputs/%d outputs)\n",
+ dev->board_name, board->di_nchan, board->do_nchan);
+
+ return 0;
+}
+
+static int adl_pci7x3x_attach(struct comedi_device *dev,
+ struct comedi_devconfig *it)
+{
+ dev_warn(dev->class_dev,
+ "This driver does not support attach using comedi_config\n");
+
+ return -ENOSYS;
+}
+
+static void adl_pci7x3x_detach(struct comedi_device *dev)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+
+ if (pcidev) {
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
+ }
+}
+
+static struct comedi_driver adl_pci7x3x_driver = {
+ .driver_name = "adl_pci7x3x",
+ .module = THIS_MODULE,
+ .attach = adl_pci7x3x_attach,
+ .attach_pci = adl_pci7x3x_attach_pci,
+ .detach = adl_pci7x3x_detach,
+};
+
+static int __devinit adl_pci7x3x_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &adl_pci7x3x_driver);
+}
+
+static void __devexit adl_pci7x3x_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7x3x_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7233) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7234) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7433) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7434) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, adl_pci7x3x_pci_table);
+
+static struct pci_driver adl_pci7x3x_pci_driver = {
+ .name = "adl_pci7x3x",
+ .id_table = adl_pci7x3x_pci_table,
+ .probe = adl_pci7x3x_pci_probe,
+ .remove = __devexit_p(adl_pci7x3x_pci_remove),
+};
+module_comedi_pci_driver(adl_pci7x3x_driver, adl_pci7x3x_pci_driver);
+
+MODULE_DESCRIPTION("ADLINK PCI-723x/743x Isolated Digital I/O boards");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
