On Thu, Jul 12, 2012 at 07:02:29PM +0300, Eduardo Valentin wrote: > In the System Control Module, OMAP supplies a voltage reference > and a temperature sensor feature that are gathered in the band > gap voltage and temperature sensor (VBGAPTS) module. The band > gap provides current and voltage reference for its internal > circuits and other analog IP blocks. The analog-to-digital > converter (ADC) produces an output value that is proportional > to the silicon temperature. > > This patch provides a platform driver which expose this feature. > It is moduled as a MFD child of the System Control Module core > MFD driver. > > This driver provides only APIs to access the device properties, > like temperature, thresholds and update rate. > > Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx> > Signed-off-by: J Keerthy <j-keerthy@xxxxxx> > --- > drivers/staging/Kconfig | 2 + > drivers/staging/Makefile | 1 + > drivers/staging/omap-thermal/Kconfig | 11 + > drivers/staging/omap-thermal/Makefile | 2 + > drivers/staging/omap-thermal/TODO | 28 + > drivers/staging/omap-thermal/omap-bandgap.c | 1167 +++++++++++++++++++++++++ > drivers/staging/omap-thermal/omap-bandgap.h | 425 +++++++++ > drivers/staging/omap-thermal/omap_bandgap.txt | 30 + > 8 files changed, 1666 insertions(+), 0 deletions(-) > create mode 100644 drivers/staging/omap-thermal/Kconfig > create mode 100644 drivers/staging/omap-thermal/Makefile > create mode 100644 drivers/staging/omap-thermal/TODO > create mode 100644 drivers/staging/omap-thermal/omap-bandgap.c > create mode 100644 drivers/staging/omap-thermal/omap-bandgap.h > create mode 100644 drivers/staging/omap-thermal/omap_bandgap.txt > > Patch changelog: > Change from V1 to V2: > - Compilation fixes on Kconfig and Makefiles under drivers/staging > Change from V2 to V3: > - Removed empty line from end of Kconfig file, so git is happy while applying > - Keerthy's SOB now matches Copyright notice found in files > Change from V3 to V4: > - Fixed -Werror-implicit-function-declaration compilation issues. > - Limited driver compilation to OMAP4/5 > > diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig > index d3934d7..e3402d5 100644 > --- a/drivers/staging/Kconfig > +++ b/drivers/staging/Kconfig > @@ -134,4 +134,6 @@ source "drivers/staging/gdm72xx/Kconfig" > > source "drivers/staging/csr/Kconfig" > > +source "drivers/staging/omap-thermal/Kconfig" > + > endif # STAGING > diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile > index 5b2219a..dbbdbbc 100644 > --- a/drivers/staging/Makefile > +++ b/drivers/staging/Makefile > @@ -59,3 +59,4 @@ obj-$(CONFIG_USB_WPAN_HCD) += ozwpan/ > obj-$(CONFIG_USB_G_CCG) += ccg/ > obj-$(CONFIG_WIMAX_GDM72XX) += gdm72xx/ > obj-$(CONFIG_CSR_WIFI) += csr/ > +obj-y += omap-thermal/ Ick, no, why did you do that? This should only be entered if the config entry is selected, right? Did I just miss this on your previous patches? Sorry about that. I'll see if I can fix it up by hand... greg k-h _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
