Add some whitespace to the subdev initialization to improve
readability.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/cb_das16_cs.c | 48 ++++++++++++++--------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index c92e232..11dc9b1 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -475,39 +475,39 @@ static int das16cs_attach(struct comedi_device *dev,
s = dev->subdevices + 0;
dev->read_subdev = s;
/* analog input subdevice */
- s->type = COMEDI_SUBD_AI;
- s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ;
- s->n_chan = 16;
- s->maxdata = 0xffff;
- s->range_table = &das16cs_ai_range;
- s->len_chanlist = 16;
- s->insn_read = das16cs_ai_rinsn;
- s->do_cmd = das16cs_ai_cmd;
- s->do_cmdtest = das16cs_ai_cmdtest;
+ s->type = COMEDI_SUBD_AI;
+ s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ;
+ s->n_chan = 16;
+ s->maxdata = 0xffff;
+ s->range_table = &das16cs_ai_range;
+ s->len_chanlist = 16;
+ s->insn_read = das16cs_ai_rinsn;
+ s->do_cmd = das16cs_ai_cmd;
+ s->do_cmdtest = das16cs_ai_cmdtest;
s = dev->subdevices + 1;
/* analog output subdevice */
if (thisboard->n_ao_chans) {
- s->type = COMEDI_SUBD_AO;
- s->subdev_flags = SDF_WRITABLE;
- s->n_chan = thisboard->n_ao_chans;
- s->maxdata = 0xffff;
- s->range_table = &range_bipolar10;
- s->insn_write = &das16cs_ao_winsn;
- s->insn_read = &das16cs_ao_rinsn;
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = thisboard->n_ao_chans;
+ s->maxdata = 0xffff;
+ s->range_table = &range_bipolar10;
+ s->insn_write = &das16cs_ao_winsn;
+ s->insn_read = &das16cs_ao_rinsn;
} else {
- s->type = COMEDI_SUBD_UNUSED;
+ s->type = COMEDI_SUBD_UNUSED;
}
s = dev->subdevices + 2;
/* digital i/o subdevice */
- s->type = COMEDI_SUBD_DIO;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- s->n_chan = 8;
- s->maxdata = 1;
- s->range_table = &range_digital;
- s->insn_bits = das16cs_dio_insn_bits;
- s->insn_config = das16cs_dio_insn_config;
+ s->type = COMEDI_SUBD_DIO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ s->n_chan = 8;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = das16cs_dio_insn_bits;
+ s->insn_config = das16cs_dio_insn_config;
dev_info(dev->class_dev, "%s: %s, I/O base=0x%04lx, irq=%u\n",
dev->driver->driver_name, dev->board_name,
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
