[PATCH] staging: reduce stack usage in prism2fw.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>

Fix frame size (stack usage) warning by allocating and freeing
pointers to the data.

drivers/staging/wlan-ng/prism2fw.c:1115:1: warning: the frame size of 4288 bytes is larger than 2048 bytes

Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
---

Is there some reason that this shouldn't work?

 drivers/staging/wlan-ng/prism2fw.c |  124 +++++++++++++++------------
 1 file changed, 69 insertions(+), 55 deletions(-)

--- lnx-35-rc4.orig/drivers/staging/wlan-ng/prism2fw.c
+++ lnx-35-rc4/drivers/staging/wlan-ng/prism2fw.c
@@ -980,9 +980,8 @@ int writeimage(wlandevice_t *wlandev, st
 	       unsigned int nfchunks)
 {
 	int result = 0;
-	struct p80211msg_p2req_ramdl_state rstatemsg;
-	struct p80211msg_p2req_ramdl_write rwritemsg;
-	struct p80211msg *msgp;
+	struct p80211msg_p2req_ramdl_state *rstmsg;
+	struct p80211msg_p2req_ramdl_write *rwrmsg;
 	u32 resultcode;
 	int i;
 	int j;
@@ -991,57 +990,68 @@ int writeimage(wlandevice_t *wlandev, st
 	u32 currlen;
 	u32 currdaddr;
 
+	rstmsg = kmalloc(sizeof(*rstmsg), GFP_KERNEL);
+	rwrmsg = kmalloc(sizeof(*rwrmsg), GFP_KERNEL);
+	if (!rstmsg || !rwrmsg) {
+		kfree(rstmsg);
+		kfree(rwrmsg);
+		printk(KERN_ERR
+		       "writeimage: no memory for firmware download, "
+		       "aborting download\n");
+		return -ENOMEM;
+	}
+
 	/* Initialize the messages */
-	memset(&rstatemsg, 0, sizeof(rstatemsg));
-	strcpy(rstatemsg.devname, wlandev->name);
-	rstatemsg.msgcode = DIDmsg_p2req_ramdl_state;
-	rstatemsg.msglen = sizeof(rstatemsg);
-	rstatemsg.enable.did = DIDmsg_p2req_ramdl_state_enable;
-	rstatemsg.exeaddr.did = DIDmsg_p2req_ramdl_state_exeaddr;
-	rstatemsg.resultcode.did = DIDmsg_p2req_ramdl_state_resultcode;
-	rstatemsg.enable.status = P80211ENUM_msgitem_status_data_ok;
-	rstatemsg.exeaddr.status = P80211ENUM_msgitem_status_data_ok;
-	rstatemsg.resultcode.status = P80211ENUM_msgitem_status_no_value;
-	rstatemsg.enable.len = sizeof(u32);
-	rstatemsg.exeaddr.len = sizeof(u32);
-	rstatemsg.resultcode.len = sizeof(u32);
-
-	memset(&rwritemsg, 0, sizeof(rwritemsg));
-	strcpy(rwritemsg.devname, wlandev->name);
-	rwritemsg.msgcode = DIDmsg_p2req_ramdl_write;
-	rwritemsg.msglen = sizeof(rwritemsg);
-	rwritemsg.addr.did = DIDmsg_p2req_ramdl_write_addr;
-	rwritemsg.len.did = DIDmsg_p2req_ramdl_write_len;
-	rwritemsg.data.did = DIDmsg_p2req_ramdl_write_data;
-	rwritemsg.resultcode.did = DIDmsg_p2req_ramdl_write_resultcode;
-	rwritemsg.addr.status = P80211ENUM_msgitem_status_data_ok;
-	rwritemsg.len.status = P80211ENUM_msgitem_status_data_ok;
-	rwritemsg.data.status = P80211ENUM_msgitem_status_data_ok;
-	rwritemsg.resultcode.status = P80211ENUM_msgitem_status_no_value;
-	rwritemsg.addr.len = sizeof(u32);
-	rwritemsg.len.len = sizeof(u32);
-	rwritemsg.data.len = WRITESIZE_MAX;
-	rwritemsg.resultcode.len = sizeof(u32);
+	memset(rstmsg, 0, sizeof(*rstmsg));
+	strcpy(rstmsg->devname, wlandev->name);
+	rstmsg->msgcode = DIDmsg_p2req_ramdl_state;
+	rstmsg->msglen = sizeof(*rstmsg);
+	rstmsg->enable.did = DIDmsg_p2req_ramdl_state_enable;
+	rstmsg->exeaddr.did = DIDmsg_p2req_ramdl_state_exeaddr;
+	rstmsg->resultcode.did = DIDmsg_p2req_ramdl_state_resultcode;
+	rstmsg->enable.status = P80211ENUM_msgitem_status_data_ok;
+	rstmsg->exeaddr.status = P80211ENUM_msgitem_status_data_ok;
+	rstmsg->resultcode.status = P80211ENUM_msgitem_status_no_value;
+	rstmsg->enable.len = sizeof(u32);
+	rstmsg->exeaddr.len = sizeof(u32);
+	rstmsg->resultcode.len = sizeof(u32);
+
+	memset(rwrmsg, 0, sizeof(*rwrmsg));
+	strcpy(rwrmsg->devname, wlandev->name);
+	rwrmsg->msgcode = DIDmsg_p2req_ramdl_write;
+	rwrmsg->msglen = sizeof(*rwrmsg);
+	rwrmsg->addr.did = DIDmsg_p2req_ramdl_write_addr;
+	rwrmsg->len.did = DIDmsg_p2req_ramdl_write_len;
+	rwrmsg->data.did = DIDmsg_p2req_ramdl_write_data;
+	rwrmsg->resultcode.did = DIDmsg_p2req_ramdl_write_resultcode;
+	rwrmsg->addr.status = P80211ENUM_msgitem_status_data_ok;
+	rwrmsg->len.status = P80211ENUM_msgitem_status_data_ok;
+	rwrmsg->data.status = P80211ENUM_msgitem_status_data_ok;
+	rwrmsg->resultcode.status = P80211ENUM_msgitem_status_no_value;
+	rwrmsg->addr.len = sizeof(u32);
+	rwrmsg->len.len = sizeof(u32);
+	rwrmsg->data.len = WRITESIZE_MAX;
+	rwrmsg->resultcode.len = sizeof(u32);
 
 	/* Send xxx_state(enable) */
 	pr_debug("Sending dl_state(enable) message.\n");
-	rstatemsg.enable.data = P80211ENUM_truth_true;
-	rstatemsg.exeaddr.data = startaddr;
+	rstmsg->enable.data = P80211ENUM_truth_true;
+	rstmsg->exeaddr.data = startaddr;
 
-	msgp = (struct p80211msg *) &rstatemsg;
-	result = prism2mgmt_ramdl_state(wlandev, msgp);
+	result = prism2mgmt_ramdl_state(wlandev, rstmsg);
 	if (result) {
 		printk(KERN_ERR
 		       "writeimage state enable failed w/ result=%d, "
 		       "aborting download\n", result);
-		return result;
+		goto free_result;
 	}
-	resultcode = rstatemsg.resultcode.data;
+	resultcode = rstmsg->resultcode.data;
 	if (resultcode != P80211ENUM_resultcode_success) {
 		printk(KERN_ERR
 		       "writeimage()->xxxdl_state msg indicates failure, "
 		       "w/ resultcode=%d, aborting download.\n", resultcode);
-		return 1;
+		result = 1;
+		goto free_result;
 	}
 
 	/* Now, loop through the data chunks and send WRITESIZE_MAX data */
@@ -1059,9 +1069,9 @@ int writeimage(wlandevice_t *wlandev, st
 			curroff = j * WRITESIZE_MAX;
 			currdaddr = fchunk[i].addr + curroff;
 			/* Setup the message */
-			rwritemsg.addr.data = currdaddr;
-			rwritemsg.len.data = currlen;
-			memcpy(rwritemsg.data.data,
+			rwrmsg->addr.data = currdaddr;
+			rwrmsg->len.data = currlen;
+			memcpy(rwrmsg->data.data,
 			       fchunk[i].data + curroff, currlen);
 
 			/* Send flashdl_write(pda) */
@@ -1069,23 +1079,23 @@ int writeimage(wlandevice_t *wlandev, st
 			    ("Sending xxxdl_write message addr=%06x len=%d.\n",
 			     currdaddr, currlen);
 
-			msgp = (struct p80211msg *) &rwritemsg;
-			result = prism2mgmt_ramdl_write(wlandev, msgp);
+			result = prism2mgmt_ramdl_write(wlandev, rwrmsg);
 
 			/* Check the results */
 			if (result) {
 				printk(KERN_ERR
 				       "writeimage chunk write failed w/ result=%d, "
 				       "aborting download\n", result);
-				return result;
+				goto free_result;
 			}
-			resultcode = rstatemsg.resultcode.data;
+			resultcode = rstmsg->resultcode.data;
 			if (resultcode != P80211ENUM_resultcode_success) {
 				printk(KERN_ERR
 				       "writeimage()->xxxdl_write msg indicates failure, "
 				       "w/ resultcode=%d, aborting download.\n",
 				       resultcode);
-				return 1;
+				result = 1;
+				goto free_result;
 			}
 
 		}
@@ -1093,24 +1103,28 @@ int writeimage(wlandevice_t *wlandev, st
 
 	/* Send xxx_state(disable) */
 	pr_debug("Sending dl_state(disable) message.\n");
-	rstatemsg.enable.data = P80211ENUM_truth_false;
-	rstatemsg.exeaddr.data = 0;
+	rstmsg->enable.data = P80211ENUM_truth_false;
+	rstmsg->exeaddr.data = 0;
 
-	msgp = (struct p80211msg *) &rstatemsg;
-	result = prism2mgmt_ramdl_state(wlandev, msgp);
+	result = prism2mgmt_ramdl_state(wlandev, rstmsg);
 	if (result) {
 		printk(KERN_ERR
 		       "writeimage state disable failed w/ result=%d, "
 		       "aborting download\n", result);
-		return result;
+		goto free_result;
 	}
-	resultcode = rstatemsg.resultcode.data;
+	resultcode = rstmsg->resultcode.data;
 	if (resultcode != P80211ENUM_resultcode_success) {
 		printk(KERN_ERR
 		       "writeimage()->xxxdl_state msg indicates failure, "
 		       "w/ resultcode=%d, aborting download.\n", resultcode);
-		return 1;
+		result = 1;
+		goto free_result;
 	}
+
+free_result:
+	kfree(rstmsg);
+	kfree(rwrmsg);
 	return result;
 }
 
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux