From: Kevin McKinney <klmckinney1@xxxxxxxxx>
This patch removes struct bcm_target_params
because it is not being used.
Signed-off-by: Kevin McKinney <klmckinney1@xxxxxxxxx>
---
drivers/staging/bcm/Adapter.h | 81 -----------------------------------------
1 file changed, 81 deletions(-)
diff --git a/drivers/staging/bcm/Adapter.h b/drivers/staging/bcm/Adapter.h
index 4ce3670..4a142c4 100644
--- a/drivers/staging/bcm/Adapter.h
+++ b/drivers/staging/bcm/Adapter.h
@@ -203,87 +203,6 @@ struct bcm_per_tarang_data {
ULONG RxCntrlMsgBitMask;
};
-#ifdef REL_4_1
-struct bcm_target_params {
- B_UINT32 m_u32CfgVersion;
-
- /* Scanning Related Params */
- B_UINT32 m_u32CenterFrequency;
- B_UINT32 m_u32BandAScan;
- B_UINT32 m_u32BandBScan;
- B_UINT32 m_u32BandCScan;
-
- /* QoS Params */
- B_UINT32 m_u32minGrantsize; /* size of minimum grant is 0 or 6 */
- B_UINT32 m_u32PHSEnable;
-
- /* HO Params */
- B_UINT32 m_u32HoEnable;
- B_UINT32 m_u32HoReserved1;
- B_UINT32 m_u32HoReserved2;
-
- /* Power Control Params */
- B_UINT32 m_u32MimoEnable;
- B_UINT32 m_u32SecurityEnable;
- /*
- * bit 1: 1 Idlemode enable;
- * bit 2: 1 Sleepmode Enable
- */
- B_UINT32 m_u32PowerSavingModesEnable;
- /* PowerSaving Mode Options:
- * bit 0 = 1: CPE mode - to keep pcmcia if alive;
- * bit 1 = 1: CINR reporing in Idlemode Msg
- * bit 2 = 1: Default PSC Enable in sleepmode
- */
- B_UINT32 m_u32PowerSavingModeOptions;
-
- B_UINT32 m_u32ArqEnable;
-
- /* From Version #3, the HARQ section renamed as general */
- B_UINT32 m_u32HarqEnable;
- /* EEPROM Param Location */
- B_UINT32 m_u32EEPROMFlag;
- /* BINARY TYPE - 4th MSByte:
- * Interface Type - 3rd MSByte:
- * Vendor Type - 2nd MSByte
- */
- /* Unused - LSByte */
- B_UINT32 m_u32Customize;
- B_UINT32 m_u32ConfigBW; /* In Hz */
- B_UINT32 m_u32ShutDownTimer;
- B_UINT32 m_u32RadioParameter;
- B_UINT32 m_u32PhyParameter1;
- B_UINT32 m_u32PhyParameter2;
- B_UINT32 m_u32PhyParameter3;
-
- /* in eval mode only;
- * lower 16bits = basic cid for testing;
- * then bit 16 is test cqich,
- * bit 17 test init rang;
- * bit 18 test periodic rang
- * bit 19 is test harq ack/nack
- */
- B_UINT32 m_u32TestOptions;
- B_UINT32 m_u32MaxMACDataperDLFrame;
- B_UINT32 m_u32MaxMACDataperULFrame;
- B_UINT32 m_u32Corr2MacFlags;
-
- /* adding driver params. */
- B_UINT32 HostDrvrConfig1;
- B_UINT32 HostDrvrConfig2;
- B_UINT32 HostDrvrConfig3;
- B_UINT32 HostDrvrConfig4;
- B_UINT32 HostDrvrConfig5;
- B_UINT32 HostDrvrConfig6;
- B_UINT32 m_u32SegmentedPUSCenable;
-
- /* BAMC enable - but 4.x does not support this feature
- * This is added just to sync 4.x and 5.x CFGs
- */
- B_UINT32 m_u32BandAMCEnable;
-};
-#endif
-
struct bcm_targetdsx_buffer {
ULONG ulTargetDsxBuffer;
B_UINT16 tid;
--
1.7.9.5
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
