[PATCH] staging: comedi: gsc_hpdi: plx9080_iobase and hpdi_iobase are void __iomem *

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The plx9080_iobase and hpdi_iobase variables in struct hpdi_private
are ioremap'ed pci resource and should be void __iomem * not void *.

This quiets a lot of sparse warings for the writel and readl calls
like:

warning: incorrect type in argument 1 (different address spaces)
   expected void const volatile [noderef] <asn:2>*addr
   got void *<noident>

warning: incorrect type in argument 2 (different address spaces)
   expected void volatile [noderef] <asn:2>*addr
   got void *

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---

diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index 8aece08..e41c664 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -297,8 +297,8 @@ struct hpdi_private {
 	resource_size_t plx9080_phys_iobase;
 	resource_size_t hpdi_phys_iobase;
 	/*  base addresses (ioremapped) */
-	void *plx9080_iobase;
-	void *hpdi_iobase;
+	void __iomem *plx9080_iobase;
+	void __iomem *hpdi_iobase;
 	uint32_t *dio_buffer[NUM_DMA_BUFFERS];	/*  dma buffers */
 	/* physical addresses of dma buffers */
 	dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS];
@@ -364,7 +364,7 @@ static void disable_plx_interrupts(struct comedi_device *dev)
 static void init_plx9080(struct comedi_device *dev)
 {
 	uint32_t bits;
-	void *plx_iobase = priv(dev)->plx9080_iobase;
+	void __iomem *plx_iobase = priv(dev)->plx9080_iobase;
 
 	/*  plx9080 dump */
 	DEBUG_PRINT(" plx interrupt status 0x%x\n",
@@ -673,10 +673,10 @@ static void hpdi_detach(struct comedi_device *dev)
 	if ((priv(dev)) && (priv(dev)->hw_dev)) {
 		if (priv(dev)->plx9080_iobase) {
 			disable_plx_interrupts(dev);
-			iounmap((void *)priv(dev)->plx9080_iobase);
+			iounmap(priv(dev)->plx9080_iobase);
 		}
 		if (priv(dev)->hpdi_iobase)
-			iounmap((void *)priv(dev)->hpdi_iobase);
+			iounmap(priv(dev)->hpdi_iobase);
 		/*  free pci dma buffers */
 		for (i = 0; i < NUM_DMA_BUFFERS; i++) {
 			if (priv(dev)->dio_buffer[i])
@@ -903,7 +903,7 @@ static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel)
 	uint32_t next_transfer_addr;
 	int j;
 	int num_samples = 0;
-	void *pci_addr_reg;
+	void __iomem *pci_addr_reg;
 
 	if (channel)
 		pci_addr_reg =
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux