Remove all the 'default N' lines in the comedi Kconfig. They should all be 'default n' but that is the default anyway. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index a1cf0b0..3bbe3fd 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -1,6 +1,5 @@ config COMEDI tristate "Data acquisition support (comedi)" - default N depends on m depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86 ---help--- @@ -37,7 +36,6 @@ config COMEDI_DEFAULT_BUF_MAXSIZE_KB menuconfig COMEDI_MISC_DRIVERS tristate "Comedi misc drivers" depends on COMEDI - default N ---help--- Enable comedi misc drivers to be built @@ -55,7 +53,6 @@ config COMEDI_KCOMEDILIB config COMEDI_BOND tristate "Device bonding support" depends on COMEDI_KCOMEDILIB - default N ---help--- Enable support for a driver to 'bond' (merge) multiple subdevices from multiple devices together as one. @@ -66,7 +63,6 @@ config COMEDI_BOND config COMEDI_TEST tristate "Fake waveform generator support" select COMEDI_FC - default N ---help--- Enable support for the fake waveform generator. This driver is mainly for testing purposes, but can also be used to @@ -78,7 +74,6 @@ config COMEDI_TEST config COMEDI_PARPORT tristate "Parallel port support" - default N ---help--- Enable support for the standard parallel port. A cheap and easy way to get a few more digital I/O lines. Steal @@ -90,7 +85,6 @@ config COMEDI_PARPORT config COMEDI_SERIAL2002 tristate "Driver for serial connected hardware" - default N ---help--- Enable support for serial connected hardware @@ -99,7 +93,6 @@ config COMEDI_SERIAL2002 config COMEDI_SKEL tristate "Comedi skeleton driver" - default N ---help--- Build the Skeleton driver, an example for driver writers @@ -111,7 +104,6 @@ endif # COMEDI_MISC_DRIVERS menuconfig COMEDI_ISA_DRIVERS tristate "Comedi ISA and PC/104 drivers" depends on COMEDI && ISA - default N ---help--- Enable comedi ISA and PC/104 drivers to be built @@ -123,7 +115,6 @@ if COMEDI_ISA_DRIVERS && ISA config COMEDI_ACL7225B tristate "ADlink NuDAQ ACL-7225b and compatibles support" - default N ---help--- Enable support for ADlink NuDAQ ACL-7225b and compatibles, ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio) @@ -133,7 +124,6 @@ config COMEDI_ACL7225B config COMEDI_PCL711 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support" - default N ---help--- Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112 @@ -143,7 +133,6 @@ config COMEDI_PCL711 config COMEDI_PCL724 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO" select COMEDI_8255 - default N ---help--- Enable support for Advantech PCL-724, PCL-722, PCL-731 and ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards @@ -153,7 +142,6 @@ config COMEDI_PCL724 config COMEDI_PCL725 tristate "Advantech PCL-725 and compatible ISA card support" - default N ---help--- Enable support for Advantech PCL-725 and compatible ISA cards. @@ -162,7 +150,6 @@ config COMEDI_PCL725 config COMEDI_PCL726 tristate "Advantech PCL-726 and compatible ISA card support" - default N ---help--- Enable support for Advantech PCL-726 and compatible ISA cards. @@ -171,7 +158,6 @@ config COMEDI_PCL726 config COMEDI_PCL730 tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support" - default N ---help--- Enable support for Advantech PCL-730, ICP ISO-730 and ADlink ACL-7130 ISA cards @@ -182,7 +168,6 @@ config COMEDI_PCL730 config COMEDI_PCL812 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" depends on VIRT_TO_BUS - default N ---help--- Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA, @@ -194,7 +179,6 @@ config COMEDI_PCL812 config COMEDI_PCL816 tristate "Advantech PCL-814 and PCL-816 ISA card support" depends on VIRT_TO_BUS - default N ---help--- Enable support for Advantech PCL-814 and PCL-816 ISA cards @@ -204,7 +188,6 @@ config COMEDI_PCL816 config COMEDI_PCL818 tristate "Advantech PCL-718 and PCL-818 ISA card support" depends on VIRT_TO_BUS - default N ---help--- Enable support for Advantech PCL-818 ISA cards PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718 @@ -215,7 +198,6 @@ config COMEDI_PCL818 config COMEDI_PCM3724 tristate "Advantech PCM-3724 PC/104 card support" select COMEDI_8255 - default N ---help--- Enable support for Advantech PCM-3724 PC/104 cards. @@ -224,7 +206,6 @@ config COMEDI_PCM3724 config COMEDI_PCM3730 tristate "Advantech PCM-3730 and clone PC/104 board support" - default N ---help--- Enable support for Advantech PCM-3730 and clone PC/104 boards @@ -235,7 +216,6 @@ config COMEDI_AMPLC_DIO200_ISA tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E" select COMEDI_AMPLC_DIO200 depends on COMEDI_ISA_DRIVERS - default N ---help--- Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and PC272E ISA DIO boards @@ -246,7 +226,6 @@ config COMEDI_AMPLC_DIO200_ISA config COMEDI_AMPLC_PC236_ISA tristate "Amplicon PC36AT DIO board support" select COMEDI_AMPLC_PC236 - default N ---help--- Enable support for Amplicon PC36AT ISA DIO board. @@ -256,7 +235,6 @@ config COMEDI_AMPLC_PC236_ISA config COMEDI_AMPLC_PC263_ISA tristate "Amplicon PC263 relay board support" select COMEDI_AMPLC_PC263 - default N ---help--- Enable support for Amplicon PC263 ISA relay board. @@ -265,7 +243,6 @@ config COMEDI_AMPLC_PC263_ISA config COMEDI_RTI800 tristate "Analog Devices RTI-800/815 ISA card support" - default N ---help--- Enable support for Analog Devices RTI-800/815 ISA cards @@ -274,7 +251,6 @@ config COMEDI_RTI800 config COMEDI_RTI802 tristate "Analog Devices RTI-802 ISA card support" - default N ---help--- Enable support for Analog Devices RTI-802 ISA cards @@ -285,7 +261,6 @@ config COMEDI_DAS16M1 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support" select COMEDI_8255 select COMEDI_FC - default N ---help--- Enable support for Measurement Computing CIO-DAS16/M1 ISA cards. @@ -295,7 +270,6 @@ config COMEDI_DAS16M1 config COMEDI_DAS08_ISA tristate "DAS-08 compatible ISA and PC/104 card support" select COMEDI_DAS08 - default N ---help--- Enable support for Keithley Metrabyte/ComputerBoards DAS08 and compatible ISA and PC/104 cards: @@ -310,7 +284,6 @@ config COMEDI_DAS16 tristate "DAS-16 compatible ISA and PC/104 card support" select COMEDI_8255 select COMEDI_FC - default N ---help--- Enable support for Keithley Metrabyte/ComputerBoards DAS16 and compatible ISA and PC/104 cards: @@ -327,7 +300,6 @@ config COMEDI_DAS16 config COMEDI_DAS800 tristate "DAS800 and compatible ISA card support" select COMEDI_FC - default N ---help--- Enable support for Keithley Metrabyte DAS800 and compatible ISA cards Keithley Metrabyte DAS-800, DAS-801, DAS-802 @@ -341,7 +313,6 @@ config COMEDI_DAS1800 tristate "DAS1800 and compatible ISA card support" depends on VIRT_TO_BUS select COMEDI_FC - default N ---help--- Enable support for DAS1800 and compatible ISA cards Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO, @@ -355,7 +326,6 @@ config COMEDI_DAS1800 config COMEDI_DAS6402 tristate "DAS6402 and compatible ISA card support" - default N ---help--- Enable support for DAS6402 and compatible ISA cards Computerboards, Keithley Metrabyte DAS6402 and compatibles @@ -365,7 +335,6 @@ config COMEDI_DAS6402 config COMEDI_DT2801 tristate "Data Translation DT2801 ISA card support" - default N ---help--- Enable support for Data Translation DT2801 ISA cards @@ -374,7 +343,6 @@ config COMEDI_DT2801 config COMEDI_DT2811 tristate "Data Translation DT2811 ISA card support" - default N ---help--- Enable support for Data Translation DT2811 ISA cards @@ -383,7 +351,6 @@ config COMEDI_DT2811 config COMEDI_DT2814 tristate "Data Translation DT2814 ISA card support" - default N ---help--- Enable support for Data Translation DT2814 ISA cards @@ -392,7 +359,6 @@ config COMEDI_DT2814 config COMEDI_DT2815 tristate "Data Translation DT2815 ISA card support" - default N ---help--- Enable support for Data Translation DT2815 ISA cards @@ -401,7 +367,6 @@ config COMEDI_DT2815 config COMEDI_DT2817 tristate "Data Translation DT2817 ISA card support" - default N ---help--- Enable support for Data Translation DT2817 ISA cards @@ -412,7 +377,6 @@ config COMEDI_DT282X tristate "Data Translation DT2821 series and DT-EZ ISA card support" select COMEDI_FC depends on VIRT_TO_BUS - default N ---help--- Enable support for Data Translation DT2821 series including DT-EZ DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI, @@ -424,7 +388,6 @@ config COMEDI_DT282X config COMEDI_DMM32AT tristate "Diamond Systems MM-32-AT PC/104 board support" - default N ---help--- Enable support for Diamond Systems MM-32-AT PC/104 boards @@ -433,7 +396,6 @@ config COMEDI_DMM32AT config COMEDI_FL512 tristate "FL512 ISA card support" - default N ---help--- Enable support for FL512 ISA card @@ -443,7 +405,6 @@ config COMEDI_FL512 config COMEDI_AIO_AIO12_8 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support" select COMEDI_8255 - default N ---help--- Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board @@ -452,7 +413,6 @@ config COMEDI_AIO_AIO12_8 config COMEDI_AIO_IIRO_16 tristate "I/O Products PC/104 IIRO16 Board support" - default N ---help--- Enable support for I/O Products PC/104 IIRO16 Relay And Isolated Input Board @@ -462,7 +422,6 @@ config COMEDI_AIO_IIRO_16 config COMEDI_C6XDIGIO tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support" - default N ---help--- Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter card @@ -472,7 +431,6 @@ config COMEDI_C6XDIGIO config COMEDI_MPC624 tristate "Micro/sys MPC-624 PC/104 board support" - default N ---help--- Enable support for Micro/sys MPC-624 PC/104 board @@ -481,7 +439,6 @@ config COMEDI_MPC624 config COMEDI_ADQ12B tristate "MicroAxial ADQ12-B data acquisition and control card support" - default N ---help--- Enable MicroAxial ADQ12-B daq and control card support. @@ -492,7 +449,6 @@ config COMEDI_NI_AT_A2150 tristate "NI AT-A2150 ISA card support" depends on COMEDI_NI_COMMON depends on VIRT_TO_BUS - default N ---help--- Enable support for National Instruments AT-A2150 cards @@ -502,7 +458,6 @@ config COMEDI_NI_AT_A2150 config COMEDI_NI_AT_AO tristate "NI AT-AO-6/10 EISA card support" depends on COMEDI_NI_COMMON - default N ---help--- Enable support for National Instruments AT-AO-6/10 cards @@ -513,7 +468,6 @@ config COMEDI_NI_ATMIO tristate "NI AT-MIO E series ISA-PNP card support" depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON select COMEDI_8255 - default N ---help--- Enable support for National Instruments AT-MIO E series cards National Instruments AT-MIO-16E-1 (ni_atmio), @@ -527,7 +481,6 @@ config COMEDI_NI_ATMIO16D tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support" depends on ISAPNP && COMEDI_NI_COMMON select COMEDI_8255 - default N ---help--- Enable support for National Instruments AT-MIO16/AT-MIO16D cards. @@ -536,7 +489,6 @@ config COMEDI_NI_ATMIO16D config COMEDI_PCMAD tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support" - default N ---help--- Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards. @@ -545,7 +497,6 @@ config COMEDI_PCMAD config COMEDI_PCMDA12 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support" - default N ---help--- Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards. Note that the board is not ISA-PNP capable and thus needs the I/O @@ -556,7 +507,6 @@ config COMEDI_PCMDA12 config COMEDI_PCMMIO tristate "Winsystems PCM-MIO PC/104 board support" - default N ---help--- Enable support for Winsystems PCM-MIO multifunction PC/104 boards. @@ -565,7 +515,6 @@ config COMEDI_PCMMIO config COMEDI_PCMUIO tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support" - default N ---help--- Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards. @@ -574,7 +523,6 @@ config COMEDI_PCMUIO config COMEDI_MULTIQ3 tristate "Quanser Consulting MultiQ-3 ISA card support" - default N ---help--- Enable support for Quanser Consulting MultiQ-3 ISA cards @@ -583,7 +531,6 @@ config COMEDI_MULTIQ3 config COMEDI_POC tristate "Generic driver for very simple devices" - default N ---help--- Enable generic support for very simple / POC (Piece of Crap) boards, Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and @@ -597,7 +544,6 @@ endif # COMEDI_ISA_DRIVERS menuconfig COMEDI_PCI_DRIVERS tristate "Comedi PCI drivers" depends on COMEDI && PCI - default N ---help--- Enable comedi PCI drivers to be built @@ -610,7 +556,6 @@ if COMEDI_PCI_DRIVERS && PCI config COMEDI_ADDI_APCI_035 tristate "ADDI-DATA APCI_035 support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_035 cards @@ -620,7 +565,6 @@ config COMEDI_ADDI_APCI_035 config COMEDI_ADDI_APCI_1032 tristate "ADDI-DATA APCI_1032 support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_1032 cards @@ -630,7 +574,6 @@ config COMEDI_ADDI_APCI_1032 config COMEDI_ADDI_APCI_1500 tristate "ADDI-DATA APCI_1500 support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_1500 cards @@ -640,7 +583,6 @@ config COMEDI_ADDI_APCI_1500 config COMEDI_ADDI_APCI_1516 tristate "ADDI-DATA APCI_1516 support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_1516 cards @@ -650,7 +592,6 @@ config COMEDI_ADDI_APCI_1516 config COMEDI_ADDI_APCI_1564 tristate "ADDI-DATA APCI_1564 support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_1564 cards @@ -660,7 +601,6 @@ config COMEDI_ADDI_APCI_1564 config COMEDI_ADDI_APCI_16XX tristate "ADDI-DATA APCI_16xx support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_16xx cards @@ -670,7 +610,6 @@ config COMEDI_ADDI_APCI_16XX config COMEDI_ADDI_APCI_2016 tristate "ADDI-DATA APCI_2016 support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_2016 cards @@ -680,7 +619,6 @@ config COMEDI_ADDI_APCI_2016 config COMEDI_ADDI_APCI_2032 tristate "ADDI-DATA APCI_2032 support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_2032 cards @@ -690,7 +628,6 @@ config COMEDI_ADDI_APCI_2032 config COMEDI_ADDI_APCI_2200 tristate "ADDI-DATA APCI_2200 support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_2200 cards @@ -701,7 +638,6 @@ config COMEDI_ADDI_APCI_3001 tristate "ADDI-DATA APCI_3001 support" depends on VIRT_TO_BUS select COMEDI_FC - default N ---help--- Enable support for ADDI-DATA APCI_3001 cards @@ -712,7 +648,6 @@ config COMEDI_ADDI_APCI_3120 tristate "ADDI-DATA APCI_3520 support" depends on VIRT_TO_BUS select COMEDI_FC - default N ---help--- Enable support for ADDI-DATA APCI_3520 cards @@ -722,7 +657,6 @@ config COMEDI_ADDI_APCI_3120 config COMEDI_ADDI_APCI_3501 tristate "ADDI-DATA APCI_3501 support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_3501 cards @@ -732,7 +666,6 @@ config COMEDI_ADDI_APCI_3501 config COMEDI_ADDI_APCI_3XXX tristate "ADDI-DATA APCI_3xxx support" depends on VIRT_TO_BUS - default N ---help--- Enable support for ADDI-DATA APCI_3xxx cards @@ -742,7 +675,6 @@ config COMEDI_ADDI_APCI_3XXX config COMEDI_ADL_PCI6208 tristate "ADLink PCI-6208A support" select COMEDI_8255 - default N ---help--- Enable support for ADLink PCI-6208A cards @@ -751,7 +683,6 @@ config COMEDI_ADL_PCI6208 config COMEDI_ADL_PCI7230 tristate "ADLink PCI-7230 digital io board support" - default N ---help--- Enable support for ADlink PCI-7230 digital io board support @@ -760,7 +691,6 @@ config COMEDI_ADL_PCI7230 config COMEDI_ADL_PCI7296 tristate "ADLink PCI-7296 96 ch. digital io board support" - default N ---help--- Enable support for ADlink PCI-7296 96 ch. digital io board support @@ -769,7 +699,6 @@ config COMEDI_ADL_PCI7296 config COMEDI_ADL_PCI7432 tristate "ADLink PCI-7432 64 ch. isolated digital io board support" - default N ---help--- Enable support for ADlink PCI-7432 64 ch. isolated digital io board @@ -778,7 +707,6 @@ config COMEDI_ADL_PCI7432 config COMEDI_ADL_PCI8164 tristate "ADLink PCI-8164 4 Axes Motion Control board support" - default N ---help--- Enable support for ADlink PCI-8164 4 Axes Motion Control board @@ -788,7 +716,6 @@ config COMEDI_ADL_PCI8164 config COMEDI_ADL_PCI9111 tristate "ADLink PCI-9111HR support" select COMEDI_FC - default N ---help--- Enable support for ADlink PCI9111 cards @@ -799,7 +726,6 @@ config COMEDI_ADL_PCI9118 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" select COMEDI_FC depends on VIRT_TO_BUS - default N ---help--- Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards @@ -808,7 +734,6 @@ config COMEDI_ADL_PCI9118 config COMEDI_ADV_PCI1710 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support" - default N ---help--- Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711, PCI-1713, PCI-1720 and PCI-1731 @@ -818,7 +743,6 @@ config COMEDI_ADV_PCI1710 config COMEDI_ADV_PCI1723 tristate "Advantech PCI-1723 support" - default N ---help--- Enable support for Advantech PCI-1723 cards @@ -828,7 +752,6 @@ config COMEDI_ADV_PCI1723 config COMEDI_ADV_PCI_DIO tristate "Advantech PCI DIO card support" select COMEDI_8255 - default N ---help--- Enable support for Advantech PCI DIO cards PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U, @@ -841,7 +764,6 @@ config COMEDI_ADV_PCI_DIO config COMEDI_AMPLC_DIO200_PCI tristate "Amplicon PCI215 and PCI272 DIO board support" select COMEDI_AMPLC_DIO200 - default N ---help--- Enable support for Amplicon PCI215 and PCI272 DIO boards. @@ -851,7 +773,6 @@ config COMEDI_AMPLC_DIO200_PCI config COMEDI_AMPLC_PC236_PCI tristate "Amplicon PCI236 DIO board support" select COMEDI_AMPLC_PC236 - default N ---help--- Enable support for Amplicon PCI236 DIO board. @@ -861,7 +782,6 @@ config COMEDI_AMPLC_PC236_PCI config COMEDI_AMPLC_PC263_PCI tristate "Amplicon PCI263 relay board support" select COMEDI_AMPLC_PC263 - default N ---help--- Enable support for Amplicon PCI263 relay board. @@ -871,7 +791,6 @@ config COMEDI_AMPLC_PC263_PCI config COMEDI_AMPLC_PCI224 tristate "Amplicon PCI224 and PCI234 support" select COMEDI_FC - default N ---help--- Enable support for Amplicon PCI224 and PCI234 AO boards @@ -881,7 +800,6 @@ config COMEDI_AMPLC_PCI224 config COMEDI_AMPLC_PCI230 tristate "Amplicon PCI230 and PCI260 support" select COMEDI_8255 - default N ---help--- Enable support for Amplicon PCI230 and PCI260 Multifunction I/O boards @@ -891,7 +809,6 @@ config COMEDI_AMPLC_PCI230 config COMEDI_CONTEC_PCI_DIO tristate "Contec PIO1616L digital I/O board support" - default N ---help--- Enable support for the Contec PIO1616L digital I/O board @@ -901,7 +818,6 @@ config COMEDI_CONTEC_PCI_DIO config COMEDI_DAS08_PCI tristate "DAS-08 PCI support" select COMEDI_DAS08 - default N ---help--- Enable support for PCI DAS-08 cards. @@ -910,7 +826,6 @@ config COMEDI_DAS08_PCI config COMEDI_DT3000 tristate "Data Translation DT3000 series support" - default N ---help--- Enable support for Data Translation DT3000 series DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and @@ -921,7 +836,6 @@ config COMEDI_DT3000 config COMEDI_DYNA_PCI10XX tristate "Dynalog PCI DAQ series support" - default N ---help--- Enable support for Dynalog PCI DAQ series PCI-1050 @@ -931,7 +845,6 @@ config COMEDI_DYNA_PCI10XX config COMEDI_UNIOXX5 tristate "Fastwel UNIOxx-5 analog and digital io board support" - default N ---help--- Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards @@ -941,7 +854,6 @@ config COMEDI_UNIOXX5 config COMEDI_GSC_HPDI tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support" select COMEDI_FC - default N ---help--- Enable support for General Standards Corporation high speed parallel digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32. @@ -952,7 +864,6 @@ config COMEDI_GSC_HPDI config COMEDI_ICP_MULTI tristate "Inova ICP_MULTI support" - default N ---help--- Enable support for Inova ICP_MULTI card @@ -961,7 +872,6 @@ config COMEDI_ICP_MULTI config COMEDI_II_PCI20KC tristate "Intelligent Instruments PCI-20001C carrier support" - default N ---help--- Enable support for Intelligent Instruments PCI-20001C carrier PCI-20001, PCI-20006 and PCI-20341 @@ -972,7 +882,6 @@ config COMEDI_II_PCI20KC config COMEDI_DAQBOARD2000 tristate "IOtech DAQboard/2000 support" select COMEDI_8255 - default N ---help--- Enable support for the IOtech DAQboard/2000 @@ -981,7 +890,6 @@ config COMEDI_DAQBOARD2000 config COMEDI_JR3_PCI tristate "JR3/PCI force sensor board support" - default N ---help--- Enable support for JR3/PCI force sensor boards @@ -990,7 +898,6 @@ config COMEDI_JR3_PCI config COMEDI_KE_COUNTER tristate "Kolter-Electronic PCI Counter 1 card support" - default N ---help--- Enable support for Kolter-Electronic PCI Counter 1 cards @@ -1001,7 +908,6 @@ config COMEDI_CB_PCIDAS64 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support" select COMEDI_8255 select COMEDI_FC - default N ---help--- Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 series with the PLX 9080 PCI controller @@ -1013,7 +919,6 @@ config COMEDI_CB_PCIDAS tristate "MeasurementComputing PCI-DAS support" select COMEDI_8255 select COMEDI_FC - default N ---help--- Enable support for ComputerBoards/MeasurementComputing PCI-DAS with AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr, @@ -1026,7 +931,6 @@ config COMEDI_CB_PCIDAS config COMEDI_CB_PCIDDA tristate "MeasurementComputing PCI-DDA series support" select COMEDI_8255 - default N ---help--- Enable support for ComputerBoards/MeasurementComputing PCI-DDA series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16, @@ -1038,7 +942,6 @@ config COMEDI_CB_PCIDDA config COMEDI_CB_PCIDIO tristate "MeasurementComputing PCI-DIO series support" select COMEDI_8255 - default N ---help--- Enable support for ComputerBoards/MeasurementComputing PCI-DIO series PCI-DIO24, PCI-DIO24H and PCI-DIO48H @@ -1049,7 +952,6 @@ config COMEDI_CB_PCIDIO config COMEDI_CB_PCIMDAS tristate "MeasurementComputing PCIM-DAS1602/16 support" select COMEDI_8255 - default N ---help--- Enable support for ComputerBoards/MeasurementComputing PCI Migration series PCIM-DAS1602/16 @@ -1060,7 +962,6 @@ config COMEDI_CB_PCIMDAS config COMEDI_CB_PCIMDDA tristate "MeasurementComputing PCIM-DDA06-16 support" select COMEDI_8255 - default N ---help--- Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16 @@ -1069,7 +970,6 @@ config COMEDI_CB_PCIMDDA config COMEDI_ME4000 tristate "Meilhaus ME-4000 support" - default N ---help--- Enable support for Meilhaus PCI data acquisition cards ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is @@ -1079,7 +979,6 @@ config COMEDI_ME4000 config COMEDI_ME_DAQ tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support" - default N ---help--- Enable support for Meilhaus PCI data acquisition cards ME-2000i, ME-2600i and ME-3000vm1 @@ -1090,7 +989,6 @@ config COMEDI_ME_DAQ config COMEDI_NI_6527 tristate "NI 6527 support" depends on COMEDI_MITE - default N ---help--- Enable support for the National Instruments 6527 PCI card @@ -1100,7 +998,6 @@ config COMEDI_NI_6527 config COMEDI_NI_65XX tristate "NI 65xx static dio PCI card support" depends on COMEDI_MITE - default N ---help--- Enable support for National Instruments 65xx static dio boards. Supported devices: National Instruments PCI-6509 (ni_65xx), @@ -1114,7 +1011,6 @@ config COMEDI_NI_65XX config COMEDI_NI_660X tristate "NI 660x counter/timer PCI card support" depends on COMEDI_NI_TIO && COMEDI_NI_COMMON - default N ---help--- Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, PXI-6602 and PXI-6608. @@ -1125,7 +1021,6 @@ config COMEDI_NI_660X config COMEDI_NI_670X tristate "NI 670x PCI card support" depends on COMEDI_MITE - default N ---help--- Enable support for National Instruments PCI-6703 and PCI-6704 @@ -1136,7 +1031,6 @@ config COMEDI_NI_PCIDIO tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support" depends on COMEDI_MITE select COMEDI_8255 - default N ---help--- Enable support for National Instruments PCI-DIO-32HS, PXI-6533, PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X, @@ -1152,7 +1046,6 @@ config COMEDI_NI_PCIMIO depends on COMEDI_NI_TIO && COMEDI_NI_COMMON select COMEDI_8255 select COMEDI_FC - default N ---help--- Enable support for National Instruments PCI-MIO-E series and M series (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, @@ -1171,7 +1064,6 @@ config COMEDI_NI_PCIMIO config COMEDI_RTD520 tristate "Real Time Devices PCI4520/DM7520 support" select COMEDI_8255 - default N ---help--- Enable support for Real Time Devices PCI4520/DM7520 @@ -1180,7 +1072,6 @@ config COMEDI_RTD520 config COMEDI_S526 tristate "Sensoray s526 support" - default N ---help--- Enable support for Sensoray s526 @@ -1190,7 +1081,6 @@ config COMEDI_S526 config COMEDI_S626 tristate "Sensoray 626 support" select COMEDI_FC - default N ---help--- Enable support for Sensoray 626 @@ -1199,7 +1089,6 @@ config COMEDI_S626 config COMEDI_SSV_DNP tristate "SSV Embedded Systems DIL/Net-PC support" - default N ---help--- Enable support for SSV Embedded Systems DIL/Net-PC @@ -1211,7 +1100,6 @@ endif # COMEDI_PCI_DRIVERS menuconfig COMEDI_PCMCIA_DRIVERS tristate "Comedi PCMCIA drivers" depends on COMEDI && (PCMCIA || PCCARD) - default N ---help--- Enable comedi PCMCIA and PCCARD drivers to be built @@ -1223,7 +1111,6 @@ if COMEDI_PCMCIA_DRIVERS && PCMCIA config COMEDI_CB_DAS16_CS tristate "CB DAS16 series PCMCIA support" - default N ---help--- Enable support for the ComputerBoards/MeasurementComputing PCMCIA cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16 @@ -1234,7 +1121,6 @@ config COMEDI_CB_DAS16_CS config COMEDI_DAS08_CS tristate "CB DAS08 PCMCIA support" select COMEDI_DAS08 - default N ---help--- Enable support for the ComputerBoards/MeasurementComputing DAS-08 PCMCIA card @@ -1245,7 +1131,6 @@ config COMEDI_DAS08_CS config COMEDI_NI_DAQ_700_CS tristate "NI DAQCard-700 PCMCIA support" depends on COMEDI_NI_COMMON - default N ---help--- Enable support for the National Instruments PCMCIA DAQCard-700 DIO @@ -1256,7 +1141,6 @@ config COMEDI_NI_DAQ_DIO24_CS tristate "NI DAQ-Card DIO-24 PCMCIA support" depends on COMEDI_NI_COMMON select COMEDI_8255 - default N ---help--- Enable support for the National Instruments PCMCIA DAQ-Card DIO-24 @@ -1266,7 +1150,6 @@ config COMEDI_NI_DAQ_DIO24_CS config COMEDI_NI_LABPC_CS tristate "NI DAQCard-1200 PCMCIA support" depends on COMEDI_NI_LABPC - default N ---help--- Enable support for the National Instruments PCMCIA DAQCard-1200 @@ -1278,7 +1161,6 @@ config COMEDI_NI_MIO_CS depends on COMEDI_NI_TIO && COMEDI_NI_COMMON select COMEDI_8255 select COMEDI_FC - default N ---help--- Enable support for the National Instruments PCMCIA DAQCard E series DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E @@ -1289,7 +1171,6 @@ config COMEDI_NI_MIO_CS config COMEDI_QUATECH_DAQP_CS tristate "Quatech DAQP PCMCIA data capture card support" - default N ---help--- Enable support for the Quatech DAQP PCMCIA data capture cards DAQP-208 and DAQP-308 @@ -1302,7 +1183,6 @@ endif # COMEDI_PCMCIA_DRIVERS menuconfig COMEDI_USB_DRIVERS tristate "Comedi USB drivers" depends on COMEDI && USB - default N ---help--- Enable comedi USB drivers to be built @@ -1314,7 +1194,6 @@ if COMEDI_USB_DRIVERS && USB config COMEDI_DT9812 tristate "DataTranslation DT9812 USB module support" - default N ---help--- Enable support for the Data Translation DT9812 USB module @@ -1323,7 +1202,6 @@ config COMEDI_DT9812 config COMEDI_USBDUX tristate "ITL USB-DUX-D support" - default N ---help--- Enable support for the Incite Technology Ltd USB-DUX-D Board @@ -1333,7 +1211,6 @@ config COMEDI_USBDUX config COMEDI_USBDUXFAST tristate "ITL USB-DUXfast support" select COMEDI_FC - default N ---help--- Enable support for the Incite Technology Ltd USB-DUXfast Board @@ -1343,7 +1220,6 @@ config COMEDI_USBDUXFAST config COMEDI_USBDUXSIGMA tristate "ITL USB-DUXsigma support" select COMEDI_FC - default N ---help--- Enable support for the Incite Technology Ltd USB-DUXsigma Board @@ -1352,7 +1228,6 @@ config COMEDI_USBDUXSIGMA config COMEDI_VMK80XX tristate "Velleman VM110/VM140 USB Board support" - default N ---help--- Build the Velleman USB Board Low-Level Driver supporting the K8055/K8061 aka VM110/VM140 devices @@ -1365,7 +1240,6 @@ endif # COMEDI_USB_DRIVERS menuconfig COMEDI_NI_COMMON tristate "Comedi National Instruments card support" depends on COMEDI - default N ---help--- Enable comedi support for National Instruments cards. Modules in this section are used by many comedi NI drivers. @@ -1379,7 +1253,6 @@ if COMEDI_NI_COMMON config COMEDI_MITE tristate "NI Mite PCI interface chip support" depends on PCI - default N ---help--- Enable support for National Instruments Mite PCI interface chip @@ -1389,7 +1262,6 @@ config COMEDI_MITE config COMEDI_NI_TIO tristate "NI general purpose counter support" depends on COMEDI_MITE - default N ---help--- Enable support for National Instruments general purpose counters. This module is not used directly by end-users. Rather, it @@ -1405,7 +1277,6 @@ config COMEDI_NI_LABPC select COMEDI_8255 select COMEDI_FC depends on VIRT_TO_BUS - default N ---help--- Enable support for National Instruments Lab-PC and compatibles Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200. @@ -1420,7 +1291,6 @@ endif # COMEDI_NI_COMMON config COMEDI_8255 tristate "Generic 8255 support" depends on COMEDI - default N ---help--- Enable generic 8255 support. @@ -1437,7 +1307,6 @@ config COMEDI_8255 config COMEDI_FC tristate "Comedi shared functions for low-level driver support" depends on COMEDI - default N ---help--- Enable support for shared functions for low-level drivers. This module is not used directly by end-users. Rather, it @@ -1447,20 +1316,20 @@ config COMEDI_FC called comedi_fc. config COMEDI_AMPLC_DIO200 - def_tristate N + tristate depends on COMEDI select COMEDI_8255 config COMEDI_AMPLC_PC236 - def_tristate N + tristate depends on COMEDI select COMEDI_8255 config COMEDI_AMPLC_PC263 - def_tristate N + tristate depends on COMEDI config COMEDI_DAS08 - def_tristate N + tristate depends on COMEDI select COMEDI_8255 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
