This is a patch to the s526.c file that fixes up a printk found
by the checkpatch.pl tool.
Used dev_<level> functions instead of printks wherver possible.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@xxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/s526.c | 50 ++++++++++++++++----------------
1 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index ffe4362..c921055 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -241,7 +241,7 @@ static int s526_gpct_rinsn(struct comedi_device *dev,
/* Check if (n > 0) */
if (insn->n <= 0) {
- printk(KERN_ERR "s526: INSN_READ: n should be > 0\n");
+ dev_err(dev->hw_dev, "INSN_READ: n should be > 0\n");
return -EINVAL;
}
/* Read the low word first */
@@ -284,7 +284,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
data[2]: Pre-load Register Value
data[3]: Conter Control Register
*/
- printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring Encoder\n");
+ dev_info(dev->hw_dev, "GPCT_INSN_CONFIG: Configuring Encoder\n");
devpriv->s526_gpct_config[subdev_channel].app =
PositionMeasurement;
@@ -391,7 +391,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
data[3]: Pre-load Register 1 Value
data[4]: Conter Control Register
*/
- printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring SPG\n");
+ dev_info(dev->hw_dev, "GPCT_INSN_CONFIG: Configuring SPG\n");
devpriv->s526_gpct_config[subdev_channel].app =
SinglePulseGeneration;
@@ -436,7 +436,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
data[3]: Pre-load Register 1 Value
data[4]: Conter Control Register
*/
- printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring PTG\n");
+ dev_info(dev->hw_dev, "GPCT_INSN_CONFIG: Configuring PTG\n");
devpriv->s526_gpct_config[subdev_channel].app =
PulseTrainGeneration;
@@ -474,7 +474,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
break;
default:
- printk(KERN_ERR "s526: unsupported GPCT_insn_config\n");
+ dev_err(dev->hw_dev, "unsupported GPCT_insn_config\n");
return -EINVAL;
break;
}
@@ -490,21 +490,21 @@ static int s526_gpct_winsn(struct comedi_device *dev,
short value;
union cmReg cmReg;
- printk(KERN_INFO "s526: GPCT_INSN_WRITE on channel %d\n",
- subdev_channel);
+ dev_info(dev->hw_dev, "GPCT_INSN_WRITE on channel %d\n",
+ subdev_channel);
cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel));
- printk(KERN_INFO "s526: Counter Mode Register: %x\n", cmReg.value);
+ dev_info(dev->hw_dev, "Counter Mode Register: %x\n", cmReg.value);
/* Check what Application of Counter this channel is configured for */
switch (devpriv->s526_gpct_config[subdev_channel].app) {
case PositionMeasurement:
- printk(KERN_INFO "S526: INSN_WRITE: PM\n");
+ dev_info(dev->hw_dev, "INSN_WRITE: PM\n");
outw(0xFFFF & ((*data) >> 16), ADDR_CHAN_REG(REG_C0H,
subdev_channel));
outw(0xFFFF & (*data), ADDR_CHAN_REG(REG_C0L, subdev_channel));
break;
case SinglePulseGeneration:
- printk(KERN_INFO "S526: INSN_WRITE: SPG\n");
+ dev_info(dev->hw_dev, "INSN_WRITE: SPG\n");
outw(0xFFFF & ((*data) >> 16), ADDR_CHAN_REG(REG_C0H,
subdev_channel));
outw(0xFFFF & (*data), ADDR_CHAN_REG(REG_C0L, subdev_channel));
@@ -517,14 +517,14 @@ static int s526_gpct_winsn(struct comedi_device *dev,
The above periods must be expressed as a multiple of the
pulse frequency on the selected source
*/
- printk(KERN_INFO "S526: INSN_WRITE: PTG\n");
+ dev_info(dev->hw_dev, "INSN_WRITE: PTG\n");
if ((insn->data[1] > insn->data[0]) && (insn->data[0] > 0)) {
(devpriv->s526_gpct_config[subdev_channel]).data[0] =
insn->data[0];
(devpriv->s526_gpct_config[subdev_channel]).data[1] =
insn->data[1];
} else {
- printk(KERN_ERR "s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n",
+ dev_err(dev->hw_dev, "INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n",
insn->data[0], insn->data[1]);
return -EINVAL;
}
@@ -613,8 +613,8 @@ static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
if (i == TIMEOUT) {
/* printk() should be used instead of printk()
* whenever the code can be called from real-time. */
- printk(KERN_ERR "s526: ADC(0x%04x) timeout\n",
- inw(ADDR_REG(REG_ISR)));
+ dev_err(dev->hw_dev, "ADC(0x%04x) timeout\n",
+ inw(ADDR_REG(REG_ISR)));
return -ETIMEDOUT;
}
@@ -712,7 +712,7 @@ static int s526_dio_insn_config(struct comedi_device *dev,
int chan = CR_CHAN(insn->chanspec);
int group, mask;
- printk(KERN_INFO "S526 DIO insn_config\n");
+ dev_info(dev->hw_dev, "S526 DIO insn_config\n");
/* The input or output configuration of each digital line is
* configured by a special insn_config instruction. chanspec
@@ -897,12 +897,12 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
cmReg.reg.reserved = 0;
n = 0;
- printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n",
- cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
+ dev_info(dev->hw_dev, "Mode reg=0x%04x, 0x%04lx\n",
+ cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
udelay(1000);
- printk(KERN_INFO "Read back mode reg=0x%04x\n",
- inw(ADDR_CHAN_REG(REG_C0M, n)));
+ dev_info(dev->hw_dev, "Read back mode reg=0x%04x\n",
+ inw(ADDR_CHAN_REG(REG_C0M, n)));
/* Load the pre-load register high word */
/* value = (short) (0x55); */
@@ -925,22 +925,22 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
udelay(1000);
- printk(KERN_INFO "Read back mode reg=0x%04x\n",
- inw(ADDR_CHAN_REG(REG_C0M, n)));
+ dev_info(dev->hw_dev, "Read back mode reg=0x%04x\n",
+ inw(ADDR_CHAN_REG(REG_C0M, n)));
#endif
- printk(KERN_INFO "Current registres:\n");
+ dev_info(dev->hw_dev, "Current registres:\n");
for (i = 0; i < S526_NUM_PORTS; i++) {
- printk(KERN_INFO "0x%02lx: 0x%04x\n",
- ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i])));
+ dev_info(dev->hw_dev, "0x%02lx: 0x%04x\n",
+ ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i])));
}
return 1;
}
static int s526_detach(struct comedi_device *dev)
{
- printk(KERN_INFO "comedi%d: s526: remove\n", dev->minor);
+ dev_info(dev->hw_dev, "comedi%d: remove\n", dev->minor);
if (dev->iobase > 0)
release_region(dev->iobase, S526_IOSIZE);
--
1.7.0.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
