Move the struct comedi_driver and associated variables to the
end of the source. This is more typical of how other drivers are
written and removes the need for the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index f54e7ff..bb86c85 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -48,17 +48,6 @@
static DEFINE_MUTEX(start_stop_sem);
-static DEFINE_PCI_DEVICE_TABLE(dyna_pci10xx_pci_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_DYNALOG, 0x1050) },
- { 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, dyna_pci10xx_pci_table);
-
-static int dyna_pci10xx_attach(struct comedi_device *dev,
- struct comedi_devconfig *it);
-static int dyna_pci10xx_detach(struct comedi_device *dev);
-
static const struct comedi_lrange range_pci1050_ai = { 3, {
BIP_RANGE(10),
BIP_RANGE(5),
@@ -113,16 +102,6 @@ static const struct boardtype boardtypes[] = {
{.name = DRV_NAME},
};
-static struct comedi_driver driver_dyna_pci10xx = {
- .driver_name = DRV_NAME,
- .module = THIS_MODULE,
- .attach = dyna_pci10xx_attach,
- .detach = dyna_pci10xx_detach,
- .board_name = &boardtypes[0].name,
- .offset = sizeof(struct boardtype),
- .num_names = ARRAY_SIZE(boardtypes),
-};
-
struct dyna_pci10xx_private {
struct pci_dev *pci_dev; /* ptr to PCI device */
char valid; /* card is usable */
@@ -418,6 +397,16 @@ static int dyna_pci10xx_detach(struct comedi_device *dev)
return 0;
}
+static struct comedi_driver driver_dyna_pci10xx = {
+ .driver_name = DRV_NAME,
+ .module = THIS_MODULE,
+ .attach = dyna_pci10xx_attach,
+ .detach = dyna_pci10xx_detach,
+ .board_name = &boardtypes[0].name,
+ .offset = sizeof(struct boardtype),
+ .num_names = ARRAY_SIZE(boardtypes),
+};
+
static int __devinit driver_dyna_pci10xx_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
@@ -429,10 +418,16 @@ static void __devexit driver_dyna_pci10xx_pci_remove(struct pci_dev *dev)
comedi_pci_auto_unconfig(dev);
}
+static DEFINE_PCI_DEVICE_TABLE(dyna_pci10xx_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_DYNALOG, 0x1050) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, dyna_pci10xx_pci_table);
+
static struct pci_driver driver_dyna_pci10xx_pci_driver = {
- .id_table = dyna_pci10xx_pci_table,
- .probe = &driver_dyna_pci10xx_pci_probe,
- .remove = __devexit_p(&driver_dyna_pci10xx_pci_remove)
+ .id_table = dyna_pci10xx_pci_table,
+ .probe = driver_dyna_pci10xx_pci_probe,
+ .remove = __devexit_p(driver_dyna_pci10xx_pci_remove),
};
static int __init driver_dyna_pci10xx_init_module(void)
@@ -447,14 +442,13 @@ static int __init driver_dyna_pci10xx_init_module(void)
(char *)driver_dyna_pci10xx.driver_name;
return pci_register_driver(&driver_dyna_pci10xx_pci_driver);
}
+module_init(driver_dyna_pci10xx_init_module);
static void __exit driver_dyna_pci10xx_cleanup_module(void)
{
pci_unregister_driver(&driver_dyna_pci10xx_pci_driver);
comedi_driver_unregister(&driver_dyna_pci10xx);
}
-
-module_init(driver_dyna_pci10xx_init_module);
module_exit(driver_dyna_pci10xx_cleanup_module);
MODULE_LICENSE("GPL");
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
