This is a patch to the rtd520.c file that fixes up a line
over 80 character warning found by the checkpatch.pl tool.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@xxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/rtd520.c | 62 +++++++++++++++++++++----------
1 files changed, 42 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 1384419..0134ecf 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -377,8 +377,11 @@ struct rtdPrivate {
u8 utcCtrl[4]; /* crtl mode for 3 utc + read back */
u8 dioStatus; /* could be read back (dio0Ctrl) */
#ifdef USE_DMA
- /* Always DMA 1/2 FIFO. Buffer (dmaBuff?) is (at least) twice that size.
- After transferring, interrupt processes 1/2 FIFO and passes to comedi */
+ /*
+ * Always DMA 1/2 FIFO. Buffer (dmaBuff?) is (at least) twice that
+ * size. After transferring, interrupt processes 1/2 FIFO and
+ * passes to comedi
+ */
s16 dma0Offset; /* current processing offset (0, 1/2) */
uint16_t *dma0Buff[DMA_CHAIN_COUNT]; /* DMA buffers (for ADC) */
dma_addr_t dma0BuffPhysAddr[DMA_CHAIN_COUNT]; /* physical addresses */
@@ -581,7 +584,8 @@ struct rtdPrivate {
/* User output N source select (write only) */
#define RtdUsrOutSource(dev, n, v) \
- writel(v, devpriv->las0+((n <= 0) ? LAS0_UOUT0_SELECT : LAS0_UOUT1_SELECT))
+ writel(v, devpriv->las0+((n <= 0) ? LAS0_UOUT0_SELECT : \
+ LAS0_UOUT1_SELECT))
/* Digital IO */
#define RtdDio0Read(dev) \
@@ -608,7 +612,8 @@ struct rtdPrivate {
/* Write one data value (sign + 12bit + marker bits) */
/* Note: matches what DMA would put. Actual value << 3 */
#define RtdDacFifoPut(dev, n, v) \
- writew((v), devpriv->las1 + (((n) == 0) ? LAS1_DAC1_FIFO : LAS1_DAC2_FIFO))
+ writew((v), devpriv->las1 + (((n) == 0) ? LAS1_DAC1_FIFO : \
+ LAS1_DAC2_FIFO))
/* Start single DAC conversion */
#define RtdDacUpdate(dev, n) \
@@ -625,7 +630,8 @@ struct rtdPrivate {
/* Reset DAC FIFO */
#define RtdDacClearFifo(dev, n) \
- writel(0, devpriv->las0+(((n) == 0) ? LAS0_DAC1_RESET : LAS0_DAC2_RESET))
+ writel(0, devpriv->las0+(((n) == 0) ? LAS0_DAC1_RESET : \
+ LAS0_DAC2_RESET))
/* Set source for DMA 0 (write only, shadow?) */
#define RtdDma0Source(dev, n) \
@@ -737,7 +743,10 @@ static int rtd_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_cmd *cmd);
static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-/* static int rtd_ai_poll (struct comedi_device *dev,struct comedi_subdevice *s); */
+/*
+ * static int rtd_ai_poll(struct comedi_device *dev,
+ * struct comedi_subdevice *s);
+ */
static int rtd_ns_to_timer(unsigned int *ns, int roundMode);
static irqreturn_t rtd_interrupt(int irq, void *d);
static int rtd520_probe_fifo_depth(struct comedi_device *dev);
@@ -857,7 +866,9 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
DPRINTK("rtd520: PCI latency = %d\n", pci_latency);
}
- /* Undocumented EPLD version (doesn't match RTD driver results) */
+ /*
+ * Undocumented EPLD version (doesn't match RTD driver results)
+ */
/*DPRINTK ("rtd520: Reading epld from %p\n",
devpriv->las0+0);
epld_version = readl (devpriv->las0+0);
@@ -970,9 +981,11 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
#ifdef USE_DMA
if (dev->irq > 0) {
printk("( DMA buff=%d )\n", DMA_CHAIN_COUNT);
- /* The PLX9080 has 2 DMA controllers, but there could be 4 sources:
- ADC, digital, DAC1, and DAC2. Since only the ADC supports cmd mode
- right now, this isn't an issue (yet) */
+ /*
+ * The PLX9080 has 2 DMA controllers, but there could be
+ * 4 sources: ADC, digital, DAC1, and DAC2. Since only the
+ * ADC supports cmd mode right now, this isn't an issue (yet)
+ */
devpriv->dma0Offset = 0;
for (index = 0; index < DMA_CHAIN_COUNT; index++) {
@@ -988,10 +1001,14 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
}
/*DPRINTK ("buff[%d] @ %p virtual, %x PCI\n",
index,
- devpriv->dma0Buff[index], devpriv->dma0BuffPhysAddr[index]); */
+ devpriv->dma0Buff[index],
+ devpriv->dma0BuffPhysAddr[index]); */
}
- /* setup DMA descriptor ring (use cpu_to_le32 for byte ordering?) */
+ /*
+ * setup DMA descriptor ring (use cpu_to_le32 for byte
+ * ordering?)
+ */
devpriv->dma0Chain =
pci_alloc_consistent(devpriv->pci_dev,
sizeof(struct plx_dma_desc) *
@@ -1278,7 +1295,8 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
}
}
if (i == limit) {
- printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n", DRV_NAME);
+ printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n",
+ DRV_NAME);
return -EIO;
}
RtdAdcClearFifo(dev);
@@ -1378,9 +1396,10 @@ static int ai_read_n(struct comedi_device *dev, struct comedi_subdevice *s,
d = RtdAdcFifoGet(dev); /* get 2s comp value */
d = d >> 3; /* low 3 bits are marker lines */
- if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan))
- sample = d + 2048; /* convert to comedi unsigned data */
- else
+ if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) {
+ /* convert to comedi unsigned data */
+ sample = d + 2048;
+ } else
sample = d;
if (!comedi_buf_put(s->async, sample))
@@ -1406,9 +1425,10 @@ static int ai_read_dregs(struct comedi_device *dev, struct comedi_subdevice *s)
}
d = d >> 3; /* low 3 bits are marker lines */
- if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan))
- sample = d + 2048; /* convert to comedi unsigned data */
- else
+ if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) {
+ /* convert to comedi unsigned data */
+ sample = d + 2048;
+ } else
sample = d;
if (!comedi_buf_put(s->async, sample))
@@ -1525,7 +1545,9 @@ static int ai_process_dma(struct comedi_device *dev, struct comedi_subdevice *s)
comedi_buf_memcpy_to(s->async, 0, dp, n);
comedi_buf_write_free(s->async, n);
- /* always at least 1 scan -- 1/2 FIFO is larger than our max scan list */
+ /*
+ * always at least 1 scan -- 1/2 FIFO is larger than our max scan list
+ */
s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS;
if (++devpriv->dma0Offset >= DMA_CHAIN_COUNT) { /* next buffer */
--
1.7.0.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
