From: "Justin P. Mattock" <justinmattock@xxxxxxxxx>
Signed-off-by: Justin P. Mattock <justinmattock@xxxxxxxxx>
---
The below patch fixes some typos that I found while going through staging/rtl8192u
drivers/staging/rtl8192u/r8180_93cx6.c | 2 +-
drivers/staging/rtl8192u/r8180_93cx6.h | 2 +-
drivers/staging/rtl8192u/r8192U.h | 6 +-
drivers/staging/rtl8192u/r8192U_core.c | 56 ++++++++++++++--------------
drivers/staging/rtl8192u/r8192U_dm.c | 50 ++++++++++++------------
drivers/staging/rtl8192u/r8192U_hw.h | 2 +-
drivers/staging/rtl8192u/r8192U_wx.c | 8 ++--
drivers/staging/rtl8192u/r8192U_wx.h | 2 +-
drivers/staging/rtl8192u/r819xU_HTType.h | 2 +-
drivers/staging/rtl8192u/r819xU_cmdpkt.c | 8 ++--
drivers/staging/rtl8192u/r819xU_firmware.c | 4 +-
drivers/staging/rtl8192u/r819xU_phy.c | 16 ++++----
drivers/staging/rtl8192u/r819xU_phyreg.h | 2 +-
13 files changed, 80 insertions(+), 80 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
index 8878cfe..0e8ff75 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -14,7 +14,7 @@
Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
- We want to tanks the Authors of those projects and the Ndiswrapper
+ We want to thanks the Authors of those projects and the Ndiswrapper
project Authors.
*/
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.h b/drivers/staging/rtl8192u/r8180_93cx6.h
index fb3ac97..3527d32 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.h
+++ b/drivers/staging/rtl8192u/r8180_93cx6.h
@@ -7,7 +7,7 @@
Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
- We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+ We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
*/
/*This files contains card eeprom (93c46 or 93c56) programming routines*/
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index 43d459d..adeb724 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -11,7 +11,7 @@
Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
- We want to tanks the Authors of those projects and the Ndiswrapper
+ We want to thanks the Authors of those projects and the Ndiswrapper
project Authors.
*/
@@ -98,7 +98,7 @@ do { if(rt_global_debug_component & component) \
#define COMP_INIT BIT2 // during driver initialization / halt / reset.
-#define COMP_RECV BIT3 // Reveive part data path.
+#define COMP_RECV BIT3 // Revive part data path.
#define COMP_SEND BIT4 // Send part path.
#define COMP_IO BIT5 // I/O Related. Added by Annie, 2006-03-02.
#define COMP_POWER BIT6 // 802.11 Power Save mode or System/Device Power state related.
@@ -322,7 +322,7 @@ typedef struct _tx_fwinfo_819x_usb {
u8 TxSubCarrier:2; // This is used for legacy OFDM rate only.
u8 STBC:2;
u8 AllowAggregation:1;
- u8 RtsHT:1; //Interpre RtsRate field as high throughput data rate
+ u8 RtsHT:1; //Interprete RtsRate field as high throughput data rate
u8 RtsShort:1; //Short PLCP for CCK, or short GI for 11n MCS
u8 RtsBandwidth:1; // This is used for HT MCS rate only.
u8 RtsSubcarrier:2; // This is used for legacy OFDM rate only.
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 9c00865..be86045 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -203,7 +203,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
{
Dot11d_Init(ieee);
ieee->bGlobalDomain = false;
- //acturally 8225 & 8256 rf chip only support B,G,24N mode
+ //actually 8225 & 8256 rf chip only support B,G,24N mode
if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256))
{
min_chan = 1;
@@ -1103,7 +1103,7 @@ inline u16 rtl8192_rate2rate(short rate)
}
-/* The protype of rx_isr has changed since one verion of Linux Kernel */
+/* The prototype of rx_isr has changed since one version of Linux Kernel */
static void rtl8192_rx_isr(struct urb *urb)
{
struct sk_buff *skb = (struct sk_buff *) urb->context;
@@ -1476,7 +1476,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
if(tcb_desc->queue_index != TXCMD_QUEUE) {
if(tx_urb->status == 0) {
dev->trans_start = jiffies;
- // As act as station mode, destion shall be unicast address.
+ // As act as station mode, destination shall be unicast address.
//priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
//priv->ieee80211->stats.tx_packets++;
priv->stats.txoktotal++;
@@ -1522,13 +1522,13 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\
(!(priv->ieee80211->queue_stop))) {
// Tx Driver Aggregation process
- /* The driver will aggregation the packets according to the following stets
+ /* The driver will aggregation the packets according to the following stats
* 1. check whether there's tx irq available, for it's a completion return
* function, it should contain enough tx irq;
- * 2. check pakcet type;
+ * 2. check packet type;
* 3. initialize sendlist, check whether the to-be send packet no greater than 1
- * 4. aggregation the packets, and fill firmware info and tx desc to it, etc.
- * 5. check whehter the packet could be sent, otherwise just insert to wait head
+ * 4. aggregates the packets, and fill firmware info and tx desc to it, etc.
+ * 5. check whether the packet could be sent, otherwise just insert to wait head
* */
skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]);
if(!check_nic_enough_desc(dev, queue_index)) {
@@ -2447,7 +2447,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
return 0;
}
-/* handle manage frame frame beacon and probe response */
+/* handle and manage frame from beacon and probe response */
static int rtl8192_handle_beacon(struct net_device * dev,
struct ieee80211_beacon * beacon,
struct ieee80211_network * network)
@@ -2625,7 +2625,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev)
void rtl8192_refresh_supportrate(struct r8192_priv* priv)
{
struct ieee80211_device* ieee = priv->ieee80211;
- //we donot consider set support rate for ABG mode, only HT MCS rate is set here.
+ //we do not consider set support rate for ABG mode, only HT MCS rate is set here.
if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
{
memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16);
@@ -2780,10 +2780,10 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
priv->TransmitConfig =
// TCR_DurProcMode | //for RTL8185B, duration setting by HW
//? TCR_DISReqQsize |
- (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reservied.
+ (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reserved.
(priv->ShortRetryLimit<<TCR_SRL_OFFSET)| // Short retry limit
(priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit
- (false ? TCR_SAT: 0); // FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them
+ (false ? TCR_SAT: 0); // FALSE: HW provides PLCP length and LENGEXT, TURE: SW provides them
#ifdef TO_DO_LIST
if(Adapter->bInHctTest)
pHalData->ReceiveConfig = pHalData->CSMethod |
@@ -3437,7 +3437,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
{ // User disable RF via registry.
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
- // Those action will be discard in MgntActSet_RF_State because off the same state
+ // Those action will be discard in MgntActSet_RF_State because of the same state
for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
}
@@ -3458,7 +3458,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
if(pHalData->eRFPowerState == eRfOff)
{
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
- // Those action will be discard in MgntActSet_RF_State because off the same state
+ // Those action will be discard in MgntActSet_RF_State because of the same state
for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
}
@@ -3586,7 +3586,7 @@ TxCheckStuck(struct net_device *dev)
//unsigned long flags;
//
- // Decide Stuch threshold according to current power save mode
+ // Decide such threshold according to current power save mode
//
// RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n");
@@ -3745,7 +3745,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev)
// Driver should not check RX stuck in IBSS mode because it is required to
// set Check BSSID in order to send beacon, however, if check BSSID is
- // set, STA cannot hear any packet a all. Emily, 2008.04.12
+ // set, STA cannot hear any packet at all. Emily, 2008.04.12
RxResetType = RxCheckStuck(dev);
}
if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL)
@@ -3962,7 +3962,7 @@ RESET_START:
up(&priv->wx_sem);
RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__);
//rtl8192_irq_disable(dev);
- RT_TRACE(COMP_RESET,"%s():===========>start to up the driver\n",__FUNCTION__);
+ RT_TRACE(COMP_RESET,"%s():===========>start up the driver\n",__FUNCTION__);
reset_status = _rtl8192_up(dev);
RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__);
@@ -4155,7 +4155,7 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work)
void watch_dog_timer_callback(unsigned long data)
{
struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
- //printk("===============>watch_dog timer\n");
+ //printk("===============>watch_dog timer\n");
queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0);
mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
}
@@ -4170,7 +4170,7 @@ int _rtl8192_up(struct net_device *dev)
init_status = rtl8192_adapter_start(dev);
if(!init_status)
{
- RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization is failed!\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__);
priv->up=priv->ieee80211->ieee_up = 0;
return -EAGAIN;
}
@@ -4256,7 +4256,7 @@ int rtl8192_down(struct net_device *dev)
skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]);
}
- //as cancel_delayed_work will del work->timer, so if work is not definedas struct delayed_work, it will corrupt
+ //as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt
// flush_scheduled_work();
rtl8192_cancel_deferred_work(priv);
deinit_hal_dm(dev);
@@ -4516,7 +4516,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate)
/**
* Function: UpdateRxPktTimeStamp
- * Overview: Recored down the TSF time stamp when receiving a packet
+ * Overview: Record down the TSF time stamp when receiving a packet
*
* Input:
* PADAPTER Adapter
@@ -4556,9 +4556,9 @@ long rtl819x_translate_todbm(u8 signal_strength_index )// 0-100 index.
}
-/* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to
+/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to
be a local static. Otherwise, it may increase when we return from S3/S4. The
- value will be kept in memory or disk. We must delcare the value in adapter
+ value will be kept in memory or disk. We must declare the value in adapter
and it will be reinitialized when return from S3/S4. */
void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats)
{
@@ -5091,7 +5091,7 @@ static void rtl8192_query_rxphystatus(
tmp_rxevm = pofdm_buf->rxevm_X[i];
rx_evmX = (char)(tmp_rxevm);
- // Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
+ // Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment
// fill most significant bit to "zero" when doing shifting operation which may change a negative
// value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore.
rx_evmX /= 2; //dbm
@@ -5171,7 +5171,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
type = WLAN_FC_GET_TYPE(fc);
praddr = hdr->addr1;
- /* Check if the received packet is acceptabe. */
+ /* Check if the received packet is acceptable. */
bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
(eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
&& (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
@@ -5211,7 +5211,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
/**
* Function: UpdateReceivedRateHistogramStatistics
-* Overview: Recored down the received data rate
+* Overview: Record down the received data rate
*
* Input:
* struct net_device *dev
@@ -5401,7 +5401,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
}
#ifdef USB_RX_AGGREGATION_SUPPORT
- /* for the rx aggregated sub frame, the redundant space truelly contained in the packet */
+ /* for the rx aggregated sub frame, the redundant space truly contained in the packet */
if(bIsRxAggrSubframe) {
skb_pull(skb, 8);
}
@@ -5480,7 +5480,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false);
}
#endif
- /* Process the MPDU recevied */
+ /* Process the MPDU received */
skb_trim(skb, skb->len - 4/*sCrcLng*/);
rx_pkt_len = skb->len;
@@ -5538,7 +5538,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
if(PacketLength > agg_skb->len) {
break;
}
- /* Process the MPDU recevied */
+ /* Process the MPDU received */
skb = dev_alloc_skb(PacketLength);
memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength);
skb_trim(skb, skb->len - 4/*sCrcLng*/);
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 2dde9fa..3f79e61 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -38,7 +38,7 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
/*------------------------Define global variable-----------------------------*/
// Debug variable ?
dig_t dm_digtable;
-// Store current shoftware write register content for MAC PHY.
+// Store current software write register content for MAC PHY.
u8 dm_shadow[16][256] = {{0}};
// For Dynamic Rx Path Selection by Signal Strength
DRxPathSel DM_RxPathSelTable;
@@ -119,7 +119,7 @@ static void dm_pd_th(struct net_device *dev);
static void dm_cs_ratio(struct net_device *dev);
static void dm_init_ctstoself(struct net_device *dev);
-// DM --> EDCA turboe mode control
+// DM --> EDCA turbo mode control
static void dm_check_edca_turbo(struct net_device *dev);
// DM --> HW RF control
@@ -348,7 +348,7 @@ extern void init_rate_adaptive(struct net_device * dev)
*
* Revised History:
* When Who Remark
- * 05/26/08 amy Create version 0 proting from windows code.
+ * 05/26/08 amy Create version 0 porting from windows code.
*
*---------------------------------------------------------------------------*/
static void dm_check_rate_adaptive(struct net_device * dev)
@@ -543,7 +543,7 @@ static u32 OFDMSwingTable[OFDM_Table_Length] = {
0x5a400169, // 3, +3db
0x50800142, // 4, +2db
0x47c0011f, // 5, +1db
- 0x40000100, // 6, +0db ===> default, upper for higher temprature, lower for low temprature
+ 0x40000100, // 6, +0db ===> default, upper for higher temperature, lower for low temperature
0x390000e4, // 7, -1db
0x32c000cb, // 8, -2db
0x2d4000b5, // 9, -3db
@@ -678,7 +678,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
{
write_nic_byte(dev, 0x1ba, 0);
viviflag = FALSE;
- RT_TRACE(COMP_POWER_TRACKING, "we filted this data\n");
+ RT_TRACE(COMP_POWER_TRACKING, "we filtered the data\n");
for(k = 0;k < 5; k++)
tmp_report[k] = 0;
break;
@@ -864,14 +864,14 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA);
if(tmpRegA < 3 || tmpRegA > 13)
return;
- if(tmpRegA >= 12) // if over 12, TP will be bad when high temprature
+ if(tmpRegA >= 12) // if over 12, TP will be bad when high temperature
tmpRegA = 12;
RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA);
priv->ThermalMeter[0] = ThermalMeterVal; //We use fixed value by Bryant's suggestion
priv->ThermalMeter[1] = ThermalMeterVal; //We use fixed value by Bryant's suggestion
- //Get current RF-A temprature index
- if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temprature
+ //Get current RF-A temperature index
+ if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temperature
{
tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA);
tmpCCK40Mindex = tmpCCK20Mindex - 6;
@@ -885,7 +885,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
else
{
tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]);
- if(tmpval >= 6) // higher temprature
+ if(tmpval >= 6) // higher temperature
tmpOFDMindex = tmpCCK20Mindex = 0; // max to +6dB
else
tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval;
@@ -1457,9 +1457,9 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- // Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism
+ // Tx Power tracking by Thermal Meter require Firmware R/W 3-wire. This mechanism
// can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w
- // 3-wire by driver cause RF goes into wrong state.
+ // 3-wire by driver causes RF to go into a wrong state.
if(priv->ieee80211->FwRWRF)
priv->btxpower_tracking = TRUE;
else
@@ -1520,7 +1520,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
if(!TM_Trigger)
{
- //Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash
+ //Attention!! You have to write all 12bits data to RF, or it may cause RF to crash
//actually write reg0x02 bit1=0, then bit1=1.
//DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
@@ -1744,7 +1744,7 @@ extern void dm_restore_dynamic_mechanism_state(struct net_device *dev)
write_nic_dword(dev, RATR0, ratr_value);
write_nic_byte(dev, UFWP, 1);
}
- //Resore TX Power Tracking Index
+ //Restore TX Power Tracking Index
if(priv->btxpower_trackingInit && priv->btxpower_tracking){
dm_txpower_reset_recovery(dev);
}
@@ -2031,7 +2031,7 @@ static void dm_dig_init(struct net_device *dev)
dm_digtable.dbg_mode = DM_DBG_OFF; //off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig
dm_digtable.dig_algorithm_switch = 0;
- /* 2007/10/04 MH Define init gain threshol. */
+ /* 2007/10/04 MH Define init gain threshold. */
dm_digtable.dig_state = DM_STA_DIG_MAX;
dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX;
dm_digtable.initialgain_lowerbound_state = false;
@@ -2097,7 +2097,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
return;
//DbgPrint("Dig by Sw Rssi \n");
- if(dm_digtable.dig_algorithm_switch) // if swithed algorithm, we have to disable FW Dig.
+ if(dm_digtable.dig_algorithm_switch) // if switched algorithm, we have to disable FW Dig.
fw_dig = 0;
if(fw_dig <= 3) // execute several times to make sure the FW Dig is disabled
{// FW DIG Off
@@ -2160,7 +2160,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
/*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
- /* 1. When RSSI decrease, We have to judge if it is smaller than a treshold
+ /* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
and then execute below step. */
if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh))
{
@@ -2220,7 +2220,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
}
- /* 2. When RSSI increase, We have to judge if it is larger than a treshold
+ /* 2. When RSSI increase, We have to judge if it is larger than a threshold
and then execute below step. */
if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) )
{
@@ -2329,7 +2329,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
}
/* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
- it is larger than a treshold and then execute below step. */
+ it is larger than a threshold and then execute below step. */
// 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh)
{
@@ -2841,8 +2841,8 @@ static void dm_check_rfctrl_gpio(struct net_device * dev)
{
//struct r8192_priv *priv = ieee80211_priv(dev);
- // Walk around for DTM test, we will not enable HW - radio on/off because r/w
- // page 1 register before Lextra bus is enabled cause system fails when resuming
+ // Work around for DTM test, we will not enable HW - radio on/off because r/w
+ // page 1 register before extra bus is enabled causing system fails when resuming
// from S4. 20080218, Emily
// Stop to execute workitem to prevent S3/S4 bug.
@@ -3377,13 +3377,13 @@ extern void dm_fsync_timer_callback(unsigned long data)
{
u32 DiffNum = priv->rateCountDiffRecord - rate_count_diff;
- // Contiune count
+ // Continue count
if(DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold)
priv->ContiuneDiffCount++;
else
priv->ContiuneDiffCount = 0;
- // Contiune count over
+ // Continue count over
if(priv->ContiuneDiffCount >=2)
{
bSwitchFromCountDiff = true;
@@ -3392,7 +3392,7 @@ extern void dm_fsync_timer_callback(unsigned long data)
}
else
{
- // Stop contiune count
+ // Stop continue count
priv->ContiuneDiffCount = 0;
}
@@ -3523,7 +3523,7 @@ static void dm_StartSWFsync(struct net_device *dev)
RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__);
// Initial rate record to zero, start to record.
priv->rate_record = 0;
- // Initial contiune diff count to zero, start to record.
+ // Initial continue diff count to zero, start to record.
priv->ContiuneDiffCount = 0;
priv->rateCountDiffRecord = 0;
priv->bswitch_fsync = false;
@@ -3875,7 +3875,7 @@ static void dm_send_rssi_tofw(struct net_device *dev)
// If we test chariot, we should stop the TX command ?
// Because 92E will always silent reset when we send tx command. We use register
- // 0x1e0(byte) to botify driver.
+ // 0x1e0(byte) to notify driver.
write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
return;
tx_cmd.Op = TXCMD_SET_RX_RSSI;
diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h
index e89aaf7..b0ee4dd 100644
--- a/drivers/staging/rtl8192u/r8192U_hw.h
+++ b/drivers/staging/rtl8192u/r8192U_hw.h
@@ -10,7 +10,7 @@
Parts of this driver are based on the Intel Pro Wireless
2100 GPL driver.
- We want to tanks the Authors of those projects
+ We want to thanks the Authors of those projects
and the Ndiswrapper project Authors.
*/
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index 981de9b..2ce0fc8 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -13,7 +13,7 @@
Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
- We want to tanks the Authors of those projects and the Ndiswrapper
+ We want to thanks the Authors of those projects and the Ndiswrapper
project Authors.
*/
@@ -256,7 +256,7 @@ static int r8192_wx_get_ap_status(struct net_device *dev,
//count the length of input ssid
for(name_len=0 ; ((char*)wrqu->data.pointer)[name_len]!='\0' ; name_len++);
- //search for the correspoding info which is received
+ //search for the corresponding info which is received
list_for_each_entry(target, &ieee->network_list, list) {
if ( (target->ssid_len == name_len) &&
(strncmp(target->ssid, (char*)wrqu->data.pointer, name_len)==0)){
@@ -419,7 +419,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
range->max_qual.updated = 7; /* Updated all three */
range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
- /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
range->avg_qual.level = 20 + -98;
range->avg_qual.noise = 0;
range->avg_qual.updated = 7; /* Updated all three */
@@ -1047,7 +1047,7 @@ static iw_handler r8192_wx_handlers[] =
#else
NULL,
#endif
- dummy, /* SIOCGIWAPLIST -- depricated */
+ dummy, /* SIOCGIWAPLIST -- deprecated */
r8192_wx_set_scan, /* SIOCSIWSCAN */
r8192_wx_get_scan, /* SIOCGIWSCAN */
r8192_wx_set_essid, /* SIOCSIWESSID */
diff --git a/drivers/staging/rtl8192u/r8192U_wx.h b/drivers/staging/rtl8192u/r8192U_wx.h
index f4cf280..1388664 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.h
+++ b/drivers/staging/rtl8192u/r8192U_wx.h
@@ -7,7 +7,7 @@
Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
- We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+ We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
*/
/* this file (will) contains wireless extension handlers*/
diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h
index 2ac4216..e07f8b1 100644
--- a/drivers/staging/rtl8192u/r819xU_HTType.h
+++ b/drivers/staging/rtl8192u/r819xU_HTType.h
@@ -211,7 +211,7 @@ typedef struct _RT_HIGH_THROUGHPUT{
u8 bEnableHT;
u8 bCurrentHTSupport;
- u8 bRegBW40MHz; // Tx 40MHz channel capablity
+ u8 bRegBW40MHz; // Tx 40MHz channel capability
u8 bCurBW40MHz; // Tx 40MHz channel capability
u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
index 9348f42..ec1eeb7 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
@@ -157,7 +157,7 @@ SendTxCommandPacket(
seg_ptr = skb_put(skb, buffer_len);
/*
* Transform from little endian to big endian
- * and pending zero
+ * and pending zero
*/
memcpy(seg_ptr,codevirtualaddress,buffer_len);
tcb_desc->txbuf_size= (u16)buffer_len;
@@ -718,15 +718,15 @@ cmpk_message_handle_rx(
/* 2. Read virtual address from RFD. */
pcmd_buff = pstats->virtual_address;
- /* 3. Read command pakcet element id and length. */
+ /* 3. Read command packet element id and length. */
element_id = pcmd_buff[0];
/*RT_TRACE(COMP_SEND, DebugLevel,
("\n\r[CMPK]-->element ID=%d Len=%d", element_id, total_length));*/
- /* 4. Check every received command packet conent according to different
+ /* 4. Check every received command packet content according to different
element type. Because FW may aggregate RX command packet to minimize
transmit time between DRV and FW.*/
- // Add a counter to prevent to locked in the loop too long
+ // Add a counter to prevent the lock in the loop to be to long
while (total_length > 0 || exe_cnt++ >100)
{
/* 2007/01/17 MH We support aggregation of different cmd in the same packet. */
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 4bb5fff..fe5776d 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -275,11 +275,11 @@ bool init_firmware(struct net_device *dev)
/*
* Download boot, main, and data image for System reset.
- * Download data image for firmware reseta
+ * Download data image for firmware reset
*/
for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
/*
- * Open Image file, and map file to contineous memory if open file success.
+ * Open Image file, and map file to continuous memory if open file success.
* or read image file from array. Default load from IMG file
*/
if(rst_opt == OPT_SYSTEM_RESET) {
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index c4586b0..636d6fd 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -40,7 +40,7 @@ static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
* and do register read/write
* input: u32 dwBitMask //taget bit pos in the addr to be modified
* output: none
- * return: u32 return the shift bit bit position of the mask
+ * return: u32 return the shift bit position of the mask
* ****************************************************************************/
u32 rtl8192_CalculateBitShift(u32 dwBitMask)
{
@@ -176,7 +176,7 @@ u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath,
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1);
- // TODO: we should not delay such a long time. Ask help from SD3
+ // TODO: we should not delay such a long time. Ask help from SD3
msleep(1);
ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
@@ -252,7 +252,7 @@ void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath
NewOffset = Offset;
}
- // Put write addr in [5:0] and write data in [31:16]
+ // Put write addr in [5:0] and write data in [31:16]
DataAndAddr = (Data<<16) | (NewOffset&0x3f);
// Write Operation
@@ -525,7 +525,7 @@ void rtl8192_phy_configmac(struct net_device* dev)
}
/******************************************************************************
- *function: This function do dirty work
+ *function: This function does dirty work
* input: dev
* output: none
* return: none
@@ -578,7 +578,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
void rtl8192_InitBBRFRegDef(struct net_device* dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
-// RF Interface Sowrtware Control
+// RF Interface Software Control
priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
@@ -602,7 +602,7 @@ void rtl8192_InitBBRFRegDef(struct net_device* dev)
priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A)
priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E)
- //Addr of LSSI. Wirte RF register by driver
+ //Addr of LSSI. Write RF register by driver
priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter;
@@ -1384,7 +1384,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u
}
/******************************************************************************
- *function: This function does acturally set channel work
+ *function: This function does actually set channel work
* input: struct net_device *dev
* u8 channel
* output: none
@@ -1425,7 +1425,7 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev)
}
/******************************************************************************
- *function: This function scheduled actural workitem to set channel
+ *function: This function scheduled actual workitem to set channel
* input: net_device dev
* u8 channel //channel to set
* output: none
diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h
index 06b0b53..50f24dc 100644
--- a/drivers/staging/rtl8192u/r819xU_phyreg.h
+++ b/drivers/staging/rtl8192u/r819xU_phyreg.h
@@ -443,7 +443,7 @@
#define bCCKRxIG 0x7f00
#define bCCKLNAPolarity 0x800000
#define bCCKRx1stGain 0x7f0000
-#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity
+#define bCCKRFExtend 0x20000000 //CCK Rx inital gain polarity
#define bCCKRxAGCSatLevel 0x1f000000
#define bCCKRxAGCSatCount 0xe0
#define bCCKRxRFSettle 0x1f //AGCsamp_dly
--
1.7.5.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
