Cleanup for ohci-nxp.c: * Cleanup of resource handling (mem and irq), use devm_request_and_ioremap() * Use DMA_BIT_MASK() * Don't remove __devinit * Removed obsolete gpio.h include * More consistent bit access symbols * Removed unused extern declaration ocpi_enable() * Added error handling on i2c_get_adapter() * Whitespace cleanup Signed-off-by: Roland Stigge <stigge@xxxxxxxxx> --- Applies to v3.4-rc3 drivers/usb/host/ohci-nxp.c | 44 ++++++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 18 deletions(-) --- linux-2.6.orig/drivers/usb/host/ohci-nxp.c +++ linux-2.6/drivers/usb/host/ohci-nxp.c @@ -29,7 +29,6 @@ #include <mach/platform.h> #include <mach/irqs.h> -#include <asm/gpio.h> #define USB_CONFIG_BASE 0x31020000 #define PWRMAN_BASE 0x40004000 @@ -38,7 +37,9 @@ /* USB_CTRL bit defines */ #define USB_SLAVE_HCLK_EN (1 << 24) +#define USB_DEV_NEED_CLK_EN (1 << 22) #define USB_HOST_NEED_CLK_EN (1 << 21) +#define PAD_CONTROL_LAST_DRIVEN (1 << 19) #define USB_OTG_CLK_CTRL IO_ADDRESS(USB_CONFIG_BASE + 0xFF4) #define USB_OTG_CLK_STAT IO_ADDRESS(USB_CONFIG_BASE + 0xFF8) @@ -117,7 +118,6 @@ static struct i2c_driver isp1301_driver; static struct i2c_client *isp1301_i2c_client; extern int usb_disabled(void); -extern int ocpi_enable(void); static struct clk *usb_clk; @@ -220,7 +220,7 @@ static void isp1301_configure_lpc32xx(vo ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); /* Enable usb_need_clk clock after transceiver is initialized */ - __raw_writel((__raw_readl(USB_CTRL) | (1 << 22)), USB_CTRL); + __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n", i2c_smbus_read_word_data(isp1301_i2c_client, 0x00)); @@ -374,9 +374,13 @@ static int __devinit usb_hcd_nxp_probe(s const struct hc_driver *driver = &ohci_nxp_hc_driver; struct i2c_adapter *i2c_adap; struct i2c_board_info i2c_info; + struct resource *res; int ret = 0, irq; + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); if (usb_disabled()) { err("USB is disabled"); @@ -384,16 +388,8 @@ static int __devinit usb_hcd_nxp_probe(s goto out; } - if (pdev->num_resources != 2 - || pdev->resource[0].flags != IORESOURCE_MEM - || pdev->resource[1].flags != IORESOURCE_IRQ) { - err("Invalid resource configuration"); - ret = -ENODEV; - goto out; - } - /* Enable AHB slave USB clock, needed for further USB clock control */ - __raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL); + __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL); ret = i2c_add_driver(&isp1301_driver); if (ret < 0) { @@ -401,6 +397,11 @@ static int __devinit usb_hcd_nxp_probe(s goto out; } i2c_adap = i2c_get_adapter(2); + if (!i2c_adap) { + err("failed on i2c_get_adapter"); + goto out_i2c_driver; + } + memset(&i2c_info, 0, sizeof(struct i2c_board_info)); strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE); isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info, @@ -442,7 +443,7 @@ static int __devinit usb_hcd_nxp_probe(s while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) != USB_CLOCK_MASK) ; - hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev)); + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { err("Failed to allocate HC buffer"); ret = -ENOMEM; @@ -452,14 +453,21 @@ static int __devinit usb_hcd_nxp_probe(s /* Set all USB bits in the Start Enable register */ nxp_set_usb_bits(); - hcd->rsrc_start = pdev->resource[0].start; - hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(&pdev->dev, "request_mem_region failed\n"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get MEM resource"); + ret = -ENOMEM; + goto out4; + } + + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); + if (!hcd->regs) { + err("Failed to devm_request_and_ioremap"); ret = -ENOMEM; goto out4; } - hcd->regs = (void __iomem *)pdev->resource[0].start; + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); irq = platform_get_irq(pdev, 0); if (irq < 0) { _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel