Collect spelling typo in multiple files within staging directory.
Signed-off-by: Masanari Iida <standby24x7@xxxxxxxxx>
---
drivers/staging/bcm/Misc.c | 2 +-
drivers/staging/comedi/drivers/dt9812.c | 2 +-
drivers/staging/comedi/drivers/rtd520.c | 8 ++++----
drivers/staging/media/go7007/README | 2 +-
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c | 2 +-
drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c | 2 +-
drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c | 2 +-
drivers/staging/tidspbridge/core/io_sm.c | 2 +-
drivers/staging/tidspbridge/core/ue_deh.c | 2 +-
drivers/staging/usbip/usbip_protocol.txt | 2 +-
drivers/staging/vme/devices/vme_pio2_gpio.c | 2 +-
13 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c
index c7725e1..8223a69 100644
--- a/drivers/staging/bcm/Misc.c
+++ b/drivers/staging/bcm/Misc.c
@@ -835,7 +835,7 @@ int reset_card_proc(PMINI_ADAPTER ps_adapter)
Bcm_kill_all_URBs(psIntfAdapter);
/* Reset the UMA-B Device */
if (ps_adapter->chip_id >= T3LPB) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reseting UMA-B\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Resetting UMA-B\n");
retval = usb_reset_device(psIntfAdapter->udev);
psIntfAdapter->psAdapter->StopAllXaction = FALSE;
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index e86ab58..53953c2 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -715,7 +715,7 @@ static int dt9812_probe(struct usb_interface *interface,
iface_desc = interface->cur_altsetting;
if (iface_desc->desc.bNumEndpoints != 5) {
- err("Wrong number of endpints.");
+ err("Wrong number of endpoints.");
retval = -ENODEV;
goto error;
}
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 1384419..3b7393a 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -353,7 +353,7 @@ struct rtdPrivate {
unsigned long intCount; /* interrupt count */
long aiCount; /* total transfer size (samples) */
- int transCount; /* # to tranfer data. 0->1/2FIFO */
+ int transCount; /* # to transfer data. 0->1/2FIFO */
int flags; /* flag event modes */
/* PCI device info */
@@ -1989,7 +1989,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
(TRANS_TARGET_PERIOD * cmd->chanlist_len) /
cmd->scan_begin_arg;
if (devpriv->transCount < cmd->chanlist_len) {
- /* tranfer after each scan (and avoid 0) */
+ /* transfer after each scan (and avoid 0) */
devpriv->transCount = cmd->chanlist_len;
} else { /* make a multiple of scan length */
devpriv->transCount =
@@ -2005,12 +2005,12 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->transCount = 0;
devpriv->flags &= ~SEND_EOS;
} else {
- /* interrupt for each tranfer */
+ /* interrupt for each transfer */
RtdAboutCounter(dev, devpriv->transCount - 1);
}
DPRINTK
- ("rtd520: scanLen=%d tranferCount=%d fifoLen=%d\n scanTime(ns)=%d flags=0x%x\n",
+ ("rtd520: scanLen=%d transferCount=%d fifoLen=%d\n scanTime(ns)=%d flags=0x%x\n",
cmd->chanlist_len, devpriv->transCount, devpriv->fifoLen,
cmd->scan_begin_arg, devpriv->flags);
} else { /* unknown timing, just use 1/2 FIFO */
diff --git a/drivers/staging/media/go7007/README b/drivers/staging/media/go7007/README
index 48f4476..c8d6214 100644
--- a/drivers/staging/media/go7007/README
+++ b/drivers/staging/media/go7007/README
@@ -6,6 +6,6 @@ Todo:
- testing?
- handle churn in v4l layer.
-Please send patchs to Greg Kroah-Hartman <greg@xxxxxxxxx> and Cc: Ross
+Please send patches to Greg Kroah-Hartman <greg@xxxxxxxxxxxxxxxxxxx> and Cc: Ross
Cohen <rcohen@xxxxxxxxxxx> as well.
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
index 26bacb9..0f909b7 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
@@ -1905,7 +1905,7 @@ associate_complete:
}
}else{
ieee->softmac_stats.rx_auth_rs_err++;
- IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode);
+ IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode);
ieee80211_associate_abort(ieee);
}
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
index 3771985..b526fa4 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
@@ -216,7 +216,7 @@ static bool firmware_check_ready(struct net_device *dev,
break;
default:
rt_status = false;
- RT_TRACE(COMP_FIRMWARE, "Unknown firware status");
+ RT_TRACE(COMP_FIRMWARE, "Unknown firmware status");
break;
}
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
index 3e705ef..9676c59 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
@@ -689,7 +689,7 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel)
case RF_8258:
break;
default:
- RT_TRACE(COMP_ERR, "unknown rf chip in funtion %s()\n",
+ RT_TRACE(COMP_ERR, "unknown rf chip in function %s()\n",
__func__);
break;
}
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index be2a28c..6249c3f 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -671,7 +671,7 @@ void RxReorderIndicatePacket( struct ieee80211_device *ieee,
index = 1;
} else {
/* Current packet is going to be inserted into pending list.*/
- //IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to orderd list\n",__FUNCTION__);
+ //IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to ordered list\n",__FUNCTION__);
if(!list_empty(&ieee->RxReorder_Unused_List)) {
pReorderEntry = (PRX_REORDER_ENTRY)list_entry(ieee->RxReorder_Unused_List.next,RX_REORDER_ENTRY,List);
list_del_init(&pReorderEntry->List);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index c2ab5fa..f6ff8cf 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -2062,7 +2062,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
}
}else{
ieee->softmac_stats.rx_auth_rs_err++;
- IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode);
+ IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode);
ieee80211_associate_abort(ieee);
}
diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c
index 9b50b5b..c51f651 100644
--- a/drivers/staging/tidspbridge/core/io_sm.c
+++ b/drivers/staging/tidspbridge/core/io_sm.c
@@ -2212,7 +2212,7 @@ void dump_dl_modules(struct bridge_dev_context *bridge_context)
if (status) {
pr_debug(
- "%s: Failed to read dll_module stuct for 0x%x.\n",
+ "%s: Failed to read dll_module struct for 0x%x.\n",
__func__, module_dsp_addr);
break;
}
diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
index 006ffd7..3d28b23 100644
--- a/drivers/staging/tidspbridge/core/ue_deh.c
+++ b/drivers/staging/tidspbridge/core/ue_deh.c
@@ -215,7 +215,7 @@ static inline const char *event_to_string(int event)
case DSP_MMUFAULT: return "DSP_MMUFAULT"; break;
case DSP_PWRERROR: return "DSP_PWRERROR"; break;
case DSP_WDTOVERFLOW: return "DSP_WDTOVERFLOW"; break;
- default: return "unkown event"; break;
+ default: return "unknown event"; break;
}
}
diff --git a/drivers/staging/usbip/usbip_protocol.txt b/drivers/staging/usbip/usbip_protocol.txt
index 0f10208..16b6fe2 100644
--- a/drivers/staging/usbip/usbip_protocol.txt
+++ b/drivers/staging/usbip/usbip_protocol.txt
@@ -27,7 +27,7 @@ Once the client knows the list of exported USB devices it may decide to use one
of them. First the client opens a TCP/IP connection towards the server and
sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the
import was successful the TCP/IP connection remains open and will be used
-to trasfer the URB traffic between the client and the server. The client may
+to transfer the URB traffic between the client and the server. The client may
send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and
USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the
server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively.
diff --git a/drivers/staging/vme/devices/vme_pio2_gpio.c b/drivers/staging/vme/devices/vme_pio2_gpio.c
index 8584849..c766d39 100644
--- a/drivers/staging/vme/devices/vme_pio2_gpio.c
+++ b/drivers/staging/vme/devices/vme_pio2_gpio.c
@@ -79,7 +79,7 @@ static void pio2_gpio_set(struct gpio_chip *chip, unsigned int offset,
if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) |
(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
- dev_err(&card->vdev->dev, "Channel not availabe as output\n");
+ dev_err(&card->vdev->dev, "Channel not available as output\n");
return;
}
--
1.7.10.rc4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
