[PATCH 1/4] staging: comedi: amplc_dio200: separately configure ISA and PCI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The amplc_dio200 driver supports both ISA and PCI cards, but currently
it is only possible to select the driver if PCI is configured.  This
patch splits the configuration to make the ISA and PCI parts seperately
selectable, and changes the driver to only include the selected ISA
and/or PCI board types.

Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
 drivers/staging/comedi/Kconfig                |   25 +++++++-
 drivers/staging/comedi/drivers/amplc_dio200.c |   77 +++++++++++++++++--------
 2 files changed, 74 insertions(+), 28 deletions(-)

diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 12c691d..6edcba9 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -211,6 +211,18 @@ config COMEDI_PCM3730
 	  To compile this driver as a module, choose M here: the module will be
 	  called pcm3730.
 
+config COMEDI_AMPLC_DIO200_ISA
+	tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
+	select COMEDI_AMPLC_DIO200
+	depends on COMEDI_ISA_DRIVERS
+	default N
+	---help---
+	  Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
+	  PC272E ISA DIO boards
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called amplc_dio200.
+
 config COMEDI_RTI800
 	tristate "Analog Devices RTI-800/815 ISA card support"
 	default N
@@ -772,12 +784,12 @@ config COMEDI_ADV_PCI_DIO
 	  To compile this driver as a module, choose M here: the module will be
 	  called adv_pci_dio.
 
-config COMEDI_AMPLC_DIO200
-	tristate "Amplicon PC272E and PCI272 DIO board support"
-	select COMEDI_8255
+config COMEDI_AMPLC_DIO200_PCI
+	tristate "Amplicon PCI215 and PCI272 DIO board support"
+	select COMEDI_AMPLC_DIO200
 	default N
 	---help---
-	  Enable support for Amplicon PC272E and PCI272 DIO boards
+	  Enable support for Amplicon PCI215 and PCI272 DIO boards.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called amplc_dio200.
@@ -1382,3 +1394,8 @@ config COMEDI_FC
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called comedi_fc.
+
+config COMEDI_AMPLC_DIO200
+	def_tristate N
+	depends on COMEDI
+	select COMEDI_8255
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 566cc44..7e8828f 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -217,6 +217,14 @@ order they appear in the channel list.
 
 #define DIO200_DRIVER_NAME	"amplc_dio200"
 
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_DIO200_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_DIO200_PCI
+#endif
+
 /* PCI IDs */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI272 0x000a
@@ -274,10 +282,14 @@ enum dio200_model {
 };
 
 enum dio200_layout {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	pc212_layout,
 	pc214_layout,
+#endif
 	pc215_layout,
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	pc218_layout,
+#endif
 	pc272_layout
 };
 
@@ -290,6 +302,7 @@ struct dio200_board {
 };
 
 static const struct dio200_board dio200_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	{
 	 .name = "pc212e",
 	 .bustype = isa_bustype,
@@ -308,15 +321,6 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pc215e_model,
 	 .layout = pc215_layout,
 	 },
-#ifdef CONFIG_COMEDI_PCI
-	{
-	 .name = "pci215",
-	 .devid = PCI_DEVICE_ID_AMPLICON_PCI215,
-	 .bustype = pci_bustype,
-	 .model = pci215_model,
-	 .layout = pc215_layout,
-	 },
-#endif
 	{
 	 .name = "pc218e",
 	 .bustype = isa_bustype,
@@ -329,7 +333,15 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pc272e_model,
 	 .layout = pc272_layout,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
+	{
+	 .name = "pci215",
+	 .devid = PCI_DEVICE_ID_AMPLICON_PCI215,
+	 .bustype = pci_bustype,
+	 .model = pci215_model,
+	 .layout = pc215_layout,
+	 },
 	{
 	 .name = "pci272",
 	 .devid = PCI_DEVICE_ID_AMPLICON_PCI272,
@@ -337,8 +349,6 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pci272_model,
 	 .layout = pc272_layout,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = DIO200_DRIVER_NAME,
 	 .devid = PCI_DEVICE_ID_INVALID,
@@ -367,6 +377,7 @@ struct dio200_layout_struct {
 };
 
 static const struct dio200_layout_struct dio200_layouts[] = {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	[pc212_layout] = {
 			  .n_subdevs = 6,
 			  .sdtype = {sd_8255, sd_8254, sd_8254, sd_8254,
@@ -385,6 +396,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 0,
 			  .has_clk_gat_sce = 0,
 			  },
+#endif
 	[pc215_layout] = {
 			  .n_subdevs = 5,
 			  .sdtype = {sd_8255, sd_8255, sd_8254,
@@ -394,6 +406,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 1,
 			  .has_clk_gat_sce = 1,
 			  },
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	[pc218_layout] = {
 			  .n_subdevs = 7,
 			  .sdtype = {sd_8254, sd_8254, sd_8255, sd_8254,
@@ -405,6 +418,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 1,
 			  .has_clk_gat_sce = 1,
 			  },
+#endif
 	[pc272_layout] = {
 			  .n_subdevs = 4,
 			  .sdtype = {sd_8255, sd_8255, sd_8255,
@@ -419,7 +433,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
  * PCI driver table.
  */
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI215) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI272) },
@@ -427,7 +441,7 @@ static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
 };
 
 MODULE_DEVICE_TABLE(pci, dio200_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_DIO200_PCI */
 
 /*
  * Useful for shorthand access to the particular board structure
@@ -441,7 +455,7 @@ MODULE_DEVICE_TABLE(pci, dio200_pci_table);
    feel free to suggest moving the variable to the struct comedi_device struct.
  */
 struct dio200_private {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	struct pci_dev *pci_dev;	/* PCI device */
 #endif
 	int intr_sd;
@@ -490,7 +504,7 @@ static struct comedi_driver driver_amplc_dio200 = {
 	.num_names = ARRAY_SIZE(dio200_boards),
 };
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static int __devinit driver_amplc_dio200_pci_probe(struct pci_dev *dev,
 						   const struct pci_device_id
 						   *ent)
@@ -549,7 +563,7 @@ module_exit(driver_amplc_dio200_cleanup_module);
  * This function looks for a PCI device matching the requested board name,
  * bus and slot.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static int
 dio200_find_pci(struct comedi_device *dev, int bus, int slot,
 		struct pci_dev **pci_dev_p)
@@ -611,6 +625,7 @@ dio200_find_pci(struct comedi_device *dev, int bus, int slot,
  * This function checks and requests an I/O region, reporting an error
  * if there is a conflict.
  */
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 static int
 dio200_request_region(unsigned minor, unsigned long from, unsigned long extent)
 {
@@ -621,6 +636,7 @@ dio200_request_region(unsigned minor, unsigned long from, unsigned long extent)
 	}
 	return 0;
 }
+#endif
 
 /*
  * 'insn_bits' function for an 'INTERRUPT' subdevice.
@@ -1332,7 +1348,7 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
 	unsigned int irq = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@@ -1354,12 +1370,14 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		irq = it->options[1];
 		share_irq = 0;
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@@ -1382,7 +1400,7 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	devpriv->intr_sd = -1;
 
 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	if (pci_dev) {
 		ret = comedi_pci_enable(pci_dev, DIO200_DRIVER_NAME);
 		if (ret < 0) {
@@ -1396,9 +1414,11 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 		ret = dio200_request_region(dev->minor, iobase, DIO200_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;
 
@@ -1474,12 +1494,19 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	}
 
 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
+		break;
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
+	case pci_bustype:
 		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+	default:
+		break;
 	}
 	if (irq)
 		printk("(irq %u%s) ", irq, (dev->irq ? "" : " UNAVAILABLE"));
@@ -1529,7 +1556,7 @@ static int dio200_detach(struct comedi_device *dev)
 		}
 	}
 	if (devpriv) {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@@ -1537,8 +1564,10 @@ static int dio200_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, DIO200_IO_SIZE);
+#endif
 		}
 	}
 	if (dev->board_name)
-- 
1.7.8.5

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux