Fix spacing around keywords, '*', binary and ternary
operators, and fix the format of statments and function
declaration.
Signed-off-by: Andrew Miller <amiller@xxxxxxxxx>
---
drivers/staging/rtl8187se/r8180_dm.c | 442 +++++++++++++++-------------------
1 files changed, 197 insertions(+), 245 deletions(-)
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
index bd2cf4a..02bffa9 100644
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -36,10 +36,7 @@ bool CheckHighPower(struct net_device *dev)
// and they are related to OFDM and MAC registers.
// So, we don't want to update it so frequently in per-Rx packet base.
//
-void
-DoTxHighPower(
- struct net_device *dev
- )
+void DoTxHighPower(struct net_device *dev)
{
struct r8180_priv *priv = ieee80211_priv(dev);
u16 HiPwrUpperTh = 0;
@@ -65,7 +62,7 @@ DoTxHighPower(
// printk("DoTxHighPower() - UndecoratedSmoothedSS:%d, CurCCKRSSI = %d , bCurCCKPkt= %d \n", priv->UndecoratedSmoothedSS, priv->CurCCKRSSI, priv->bCurCCKPkt );
- if((priv->UndecoratedSmoothedSS > HiPwrUpperTh) ||
+ if ((priv->UndecoratedSmoothedSS > HiPwrUpperTh) ||
(priv->bCurCCKPkt && (priv->CurCCKRSSI > RSSIHiPwrUpperTh))) {
// Stevenl suggested that degrade 8dbm in high power sate. 2007-12-04 Isaiah
@@ -74,7 +71,7 @@ DoTxHighPower(
u1bTmp= read_nic_byte(dev, CCK_TXAGC);
// If it never enter High Power.
- if( CckTxPwrIdx == u1bTmp) {
+ if (CckTxPwrIdx == u1bTmp) {
u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0; // 8dbm
write_nic_byte(dev, CCK_TXAGC, u1bTmp);
@@ -83,21 +80,21 @@ DoTxHighPower(
write_nic_byte(dev, OFDM_TXAGC, u1bTmp);
}
- } else if((priv->UndecoratedSmoothedSS < HiPwrLowerTh) &&
+ } else if ((priv->UndecoratedSmoothedSS < HiPwrLowerTh) &&
(!priv->bCurCCKPkt || priv->CurCCKRSSI < RSSIHiPwrLowerTh)) {
// printk("DoTxHighPower() - lower Power - UndecoratedSmoothedSS:%d, HiPwrUpperTh = %d \n", priv->UndecoratedSmoothedSS, HiPwrLowerTh );
- if(priv->bToUpdateTxPwr) {
+ if (priv->bToUpdateTxPwr) {
priv->bToUpdateTxPwr = false;
//SD3 required.
u1bTmp= read_nic_byte(dev, CCK_TXAGC);
- if(u1bTmp < CckTxPwrIdx) {
+ if (u1bTmp < CckTxPwrIdx) {
//u1bTmp = ((u1bTmp+16) > 35) ? 35: (u1bTmp+16); // 8dbm
//write_nic_byte(dev, CCK_TXAGC, u1bTmp);
write_nic_byte(dev, CCK_TXAGC, CckTxPwrIdx);
}
u1bTmp= read_nic_byte(dev, OFDM_TXAGC);
- if(u1bTmp < OfdmTxPwrIdx) {
+ if (u1bTmp < OfdmTxPwrIdx) {
//u1bTmp = ((u1bTmp+16) > 35) ? 35: (u1bTmp+16); // 8dbm
//write_nic_byte(dev, OFDM_TXAGC, u1bTmp);
write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);
@@ -115,7 +112,7 @@ DoTxHighPower(
// Because of some event happened, e.g. CCX TPC, High Power Mechanism,
// We update Tx power of current channel again.
//
-void rtl8180_tx_pw_wq (struct work_struct *work)
+void rtl8180_tx_pw_wq(struct work_struct *work)
{
// struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq);
// struct ieee80211_device * ieee = (struct ieee80211_device*)
@@ -136,22 +133,19 @@ void rtl8180_tx_pw_wq (struct work_struct *work)
// Description:
// Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise.
//
-bool
-CheckDig(
- struct net_device *dev
- )
+bool CheckDig(struct net_device *dev)
{
struct r8180_priv *priv = ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
- if(!priv->bDigMechanism)
+ if (!priv->bDigMechanism)
return false;
- if(ieee->state != IEEE80211_LINKED)
+ if (ieee->state != IEEE80211_LINKED)
return false;
//if(priv->CurrentOperaRate < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01.
- if((priv->ieee80211->rate/5) < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01.
+ if ((priv->ieee80211->rate / 5) < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01.
return false;
return true;
}
@@ -159,17 +153,14 @@ CheckDig(
// Description:
// Implementation of DIG for Zebra and Zebra2.
//
-void
-DIG_Zebra(
- struct net_device *dev
- )
+void DIG_Zebra(struct net_device *dev)
{
struct r8180_priv *priv = ieee80211_priv(dev);
u16 CCKFalseAlarm, OFDMFalseAlarm;
u16 OfdmFA1, OfdmFA2;
int InitialGainStep = 7; // The number of initial gain stages.
int LowestGainStage = 4; // The capable lowest stage of performing dig workitem.
- u32 AwakePeriodIn2Sec=0;
+ u32 AwakePeriodIn2Sec = 0;
//printk("---------> DIG_Zebra()\n");
@@ -182,23 +173,23 @@ DIG_Zebra(
// printk("DIG**********OFDM False Alarm: %#X \n",OFDMFalseAlarm);
// The number of initial gain steps is different, by Bruce, 2007-04-13.
- if (priv->InitialGain == 0 ) { //autoDIG
+ if (priv->InitialGain == 0) { //autoDIG
// Advised from SD3 DZ
priv->InitialGain = 4; // In 87B, m74dBm means State 4 (m82dBm)
}
// Advised from SD3 DZ
- OfdmFA1 = 0x20;
+ OfdmFA1 = 0x20;
#if 1 //lzm reserved 080826
- AwakePeriodIn2Sec = (2000-priv ->DozePeriodInPast2Sec);
+ AwakePeriodIn2Sec = (2000 - priv->DozePeriodInPast2Sec);
//printk("&&& DozePeriod=%d AwakePeriod=%d\n", priv->DozePeriodInPast2Sec, AwakePeriodIn2Sec);
- priv ->DozePeriodInPast2Sec=0;
+ priv ->DozePeriodInPast2Sec = 0;
- if(AwakePeriodIn2Sec) {
+ if (AwakePeriodIn2Sec) {
//RT_TRACE(COMP_DIG, DBG_TRACE, ("DIG: AwakePeriodIn2Sec(%d) - FATh(0x%X , 0x%X) ->",AwakePeriodIn2Sec, OfdmFA1, OfdmFA2));
// adjuest DIG threshold.
- OfdmFA1 = (u16)((OfdmFA1*AwakePeriodIn2Sec) / 2000) ;
- OfdmFA2 = (u16)((OfdmFA2*AwakePeriodIn2Sec) / 2000) ;
+ OfdmFA1 = (u16)((OfdmFA1 * AwakePeriodIn2Sec) / 2000) ;
+ OfdmFA2 = (u16)((OfdmFA2 * AwakePeriodIn2Sec) / 2000) ;
//RT_TRACE(COMP_DIG, DBG_TRACE, ("( 0x%X , 0x%X)\n", OfdmFA1, OfdmFA2));
} else {
;//RT_TRACE(COMP_DIG, DBG_WARNING, ("ERROR!! AwakePeriodIn2Sec should not be ZERO!!\n"));
@@ -211,10 +202,10 @@ DIG_Zebra(
if (OFDMFalseAlarm > OfdmFA1) {
if (OFDMFalseAlarm > OfdmFA2) {
priv->DIG_NumberFallbackVote++;
- if (priv->DIG_NumberFallbackVote >1) {
+ if (priv->DIG_NumberFallbackVote > 1) {
//serious OFDM False Alarm, need fallback
if (priv->InitialGain < InitialGainStep) {
- priv->InitialGainBackUp= priv->InitialGain;
+ priv->InitialGainBackUp = priv->InitialGain;
priv->InitialGain = (priv->InitialGain + 1);
// printk("DIG**********OFDM False Alarm: %#X, OfdmFA1: %#X, OfdmFA2: %#X\n", OFDMFalseAlarm, OfdmFA1, OfdmFA2);
@@ -222,21 +213,21 @@ DIG_Zebra(
UpdateInitialGain(dev);
}
priv->DIG_NumberFallbackVote = 0;
- priv->DIG_NumberUpgradeVote=0;
+ priv->DIG_NumberUpgradeVote = 0;
}
} else {
if (priv->DIG_NumberFallbackVote)
priv->DIG_NumberFallbackVote--;
}
- priv->DIG_NumberUpgradeVote=0;
+ priv->DIG_NumberUpgradeVote = 0;
} else {
if (priv->DIG_NumberFallbackVote)
priv->DIG_NumberFallbackVote--;
priv->DIG_NumberUpgradeVote++;
- if (priv->DIG_NumberUpgradeVote>9) {
+ if (priv->DIG_NumberUpgradeVote > 9) {
if (priv->InitialGain > LowestGainStage) { // In 87B, m78dBm means State 4 (m864dBm)
- priv->InitialGainBackUp= priv->InitialGain;
+ priv->InitialGainBackUp = priv->InitialGain;
priv->InitialGain = (priv->InitialGain - 1);
// printk("DIG**********OFDM False Alarm: %#X, OfdmFA1: %#X, OfdmFA2: %#X\n", OFDMFalseAlarm, OfdmFA1, OfdmFA2);
@@ -244,7 +235,7 @@ DIG_Zebra(
UpdateInitialGain(dev);
}
priv->DIG_NumberFallbackVote = 0;
- priv->DIG_NumberUpgradeVote=0;
+ priv->DIG_NumberUpgradeVote = 0;
}
}
@@ -256,13 +247,12 @@ DIG_Zebra(
// Description:
// Dispatch DIG implementation according to RF.
//
-void
-DynamicInitGain(struct net_device *dev)
+void DynamicInitGain(struct net_device *dev)
{
DIG_Zebra(dev);
}
-void rtl8180_hw_dig_wq (struct work_struct *work)
+void rtl8180_hw_dig_wq(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,hw_dig_wq);
@@ -278,10 +268,7 @@ void rtl8180_hw_dig_wq (struct work_struct *work)
}
-int
-IncludedInSupportedRates(
- struct r8180_priv *priv,
- u8 TxRate )
+int IncludedInSupportedRates(struct r8180_priv *priv, u8 TxRate)
{
u8 rate_len;
u8 rate_ex_len;
@@ -292,14 +279,14 @@ IncludedInSupportedRates(
rate_len = priv->ieee80211->current_network.rates_len;
rate_ex_len = priv->ieee80211->current_network.rates_ex_len;
- for( idx=0; idx< rate_len; idx++ ) {
- if( (priv->ieee80211->current_network.rates[idx] & RateMask) == NaiveTxRate ) {
+ for (idx=0; idx < rate_len; idx++) {
+ if ((priv->ieee80211->current_network.rates[idx] & RateMask) == NaiveTxRate) {
Found = 1;
goto found_rate;
}
}
- for( idx=0; idx< rate_ex_len; idx++ ) {
- if( (priv->ieee80211->current_network.rates_ex[idx] & RateMask) == NaiveTxRate ) {
+ for (idx = 0; idx < rate_ex_len; idx++) {
+ if ((priv->ieee80211->current_network.rates_ex[idx] & RateMask) == NaiveTxRate) {
Found = 1;
goto found_rate;
}
@@ -315,17 +302,13 @@ IncludedInSupportedRates(
// Return the upgrade rate if it is successed, otherwise return the input rate.
// By Bruce, 2007-06-05.
//
-u8
-GetUpgradeTxRate(
- struct net_device *dev,
- u8 rate
- )
+u8 GetUpgradeTxRate(struct net_device *dev, u8 rate)
{
struct r8180_priv *priv = ieee80211_priv(dev);
u8 UpRate;
// Upgrade 1 degree.
- switch(rate) {
+ switch (rate) {
case 108: // Up to 54Mbps.
UpRate = 108;
break;
@@ -367,7 +350,7 @@ GetUpgradeTxRate(
return rate;
}
// Check if the rate is valid.
- if(IncludedInSupportedRates(priv, UpRate)) {
+ if (IncludedInSupportedRates(priv, UpRate)) {
// printk("GetUpgradeTxRate(): GetUpgrade Tx rate(%d) from %d !\n", UpRate, priv->CurrentOperaRate);
return UpRate;
} else {
@@ -382,17 +365,13 @@ GetUpgradeTxRate(
// Return the degrade rate if it is successed, otherwise return the input rate.
// By Bruce, 2007-06-05.
//
-u8
-GetDegradeTxRate(
- struct net_device *dev,
- u8 rate
- )
+u8 GetDegradeTxRate(struct net_device *dev, u8 rate)
{
struct r8180_priv *priv = ieee80211_priv(dev);
u8 DownRate;
// Upgrade 1 degree.
- switch(rate) {
+ switch (rate) {
case 108: // Down to 48Mbps.
DownRate = 96;
break;
@@ -434,7 +413,7 @@ GetDegradeTxRate(
return rate;
}
// Check if the rate is valid.
- if(IncludedInSupportedRates(priv, DownRate)) {
+ if (IncludedInSupportedRates(priv, DownRate)) {
// printk("GetDegradeTxRate(): GetDegrade Tx rate(%d) from %d!\n", DownRate, priv->CurrentOperaRate);
return DownRate;
} else {
@@ -448,14 +427,11 @@ GetDegradeTxRate(
// CCK rate.
// 2005.01.25, by rcnjko.
//
-bool
-MgntIsCckRate(
- u16 rate
- )
+bool MgntIsCckRate(u16 rate)
{
bool bReturn = false;
- if((rate <= 22) && (rate != 12) && (rate != 18)) {
+ if ((rate <= 22) && (rate != 12) && (rate != 18)) {
bReturn = true;
}
@@ -466,10 +442,7 @@ MgntIsCckRate(
// Tx Power tracking mechanism routine on 87SE.
// Created by Roger, 2007.12.11.
//
-void
-TxPwrTracking87SE(
- struct net_device *dev
-)
+void TxPwrTracking87SE(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
u8 tmpu1Byte, CurrentThermal, Idx;
@@ -477,36 +450,36 @@ TxPwrTracking87SE(
//u32 u4bRfReg;
tmpu1Byte = read_nic_byte(dev, EN_LPF_CAL);
- CurrentThermal = (tmpu1Byte & 0xf0)>>4; //[ 7:4]: thermal meter indication.
- CurrentThermal = (CurrentThermal>0x0c)? 0x0c:CurrentThermal;//lzm add 080826
+ CurrentThermal = (tmpu1Byte & 0xf0) >> 4; //[ 7:4]: thermal meter indication.
+ CurrentThermal = (CurrentThermal > 0x0c) ? 0x0c:CurrentThermal;//lzm add 080826
//printk("TxPwrTracking87SE(): CurrentThermal(%d)\n", CurrentThermal);
- if( CurrentThermal != priv->ThermalMeter) {
+ if (CurrentThermal != priv->ThermalMeter) {
// printk("TxPwrTracking87SE(): Thermal meter changed!!!\n");
// Update Tx Power level on each channel.
- for(Idx = 1; Idx<15; Idx++) {
+ for (Idx = 1; Idx < 15; Idx++) {
CckTxPwrIdx = priv->chtxpwr[Idx];
OfdmTxPwrIdx = priv->chtxpwr_ofdm[Idx];
- if( CurrentThermal > priv->ThermalMeter ) {
+ if (CurrentThermal > priv->ThermalMeter) {
// higher thermal meter.
- CckTxPwrIdx += (CurrentThermal - priv->ThermalMeter)*2;
- OfdmTxPwrIdx += (CurrentThermal - priv->ThermalMeter)*2;
+ CckTxPwrIdx += (CurrentThermal - priv->ThermalMeter) * 2;
+ OfdmTxPwrIdx += (CurrentThermal - priv->ThermalMeter) * 2;
- if(CckTxPwrIdx >35)
+ if (CckTxPwrIdx > 35)
CckTxPwrIdx = 35; // Force TxPower to maximal index.
- if(OfdmTxPwrIdx >35)
+ if (OfdmTxPwrIdx > 35)
OfdmTxPwrIdx = 35;
} else {
// lower thermal meter.
- CckTxPwrIdx -= (priv->ThermalMeter - CurrentThermal)*2;
- OfdmTxPwrIdx -= (priv->ThermalMeter - CurrentThermal)*2;
+ CckTxPwrIdx -= (priv->ThermalMeter - CurrentThermal) * 2;
+ OfdmTxPwrIdx -= (priv->ThermalMeter - CurrentThermal) * 2;
- if(CckTxPwrIdx <0)
+ if (CckTxPwrIdx < 0)
CckTxPwrIdx = 0;
- if(OfdmTxPwrIdx <0)
+ if (OfdmTxPwrIdx < 0)
OfdmTxPwrIdx = 0;
}
@@ -520,10 +493,7 @@ TxPwrTracking87SE(
}
priv->ThermalMeter = CurrentThermal;
}
-void
-StaRateAdaptive87SE(
- struct net_device *dev
- )
+void StaRateAdaptive87SE(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
unsigned long CurrTxokCnt;
@@ -538,10 +508,10 @@ StaRateAdaptive87SE(
u32 TxThroughput;
long CurrSignalStrength;
bool bUpdateInitialGain = false;
- u8 u1bOfdm=0, u1bCck = 0;
+ u8 u1bOfdm = 0, u1bCck = 0;
char OfdmTxPwrIdx, CckTxPwrIdx;
- priv->RateAdaptivePeriod= RATE_ADAPTIVE_TIMER_PERIOD;
+ priv->RateAdaptivePeriod = RATE_ADAPTIVE_TIMER_PERIOD;
CurrRetryCnt = priv->CurrRetryCnt;
@@ -550,14 +520,14 @@ StaRateAdaptive87SE(
CurrSignalStrength = priv->Stats_RecvSignalPower;
TxThroughput = (u32)(priv->NumTxOkBytesTotal - priv->LastTxOKBytes);
priv->LastTxOKBytes = priv->NumTxOkBytesTotal;
- priv->CurrentOperaRate = priv->ieee80211->rate/5;
+ priv->CurrentOperaRate = priv->ieee80211->rate / 5;
//printk("priv->CurrentOperaRate is %d\n",priv->CurrentOperaRate);
//2 Compute retry ratio.
- if (CurrTxokCnt>0) {
- CurrRetryRate = (u16)(CurrRetryCnt*100/CurrTxokCnt);
+ if (CurrTxokCnt > 0) {
+ CurrRetryRate = (u16)(CurrRetryCnt * 100 / CurrTxokCnt);
} else {
// It may be serious retry. To distinguish serious retry or no packets modified by Bruce
- CurrRetryRate = (u16)(CurrRetryCnt*100/1);
+ CurrRetryRate = (u16)(CurrRetryCnt * 100 / 1);
}
@@ -579,7 +549,7 @@ StaRateAdaptive87SE(
priv->CurrRetryCnt = 0;
//2No Tx packets, return to init_rate or not?
- if (CurrRetryRate==0 && CurrTxokCnt == 0) {
+ if (CurrRetryRate == 0 && CurrTxokCnt == 0) {
//
//After 9 (30*300ms) seconds in this condition, we try to raise rate.
//
@@ -587,7 +557,7 @@ StaRateAdaptive87SE(
// printk("No Tx packets, TryupingCountNoData(%d)\n", priv->TryupingCountNoData);
//[TRC Dell Lab] Extend raised period from 4.5sec to 9sec, Isaiah 2008-02-15 18:00
- if (priv->TryupingCountNoData>30) {
+ if (priv->TryupingCountNoData > 30) {
priv->TryupingCountNoData = 0;
priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate);
// Reset Fail Record
@@ -597,7 +567,7 @@ StaRateAdaptive87SE(
}
goto SetInitialGain;
} else {
- priv->TryupingCountNoData=0; //Reset trying up times.
+ priv->TryupingCountNoData = 0; //Reset trying up times.
}
@@ -623,12 +593,12 @@ StaRateAdaptive87SE(
// 11Mbps or 36Mbps
// Check more times in these rate(key rates).
//
- if(priv->CurrentOperaRate == 22 || priv->CurrentOperaRate == 72)
+ if (priv->CurrentOperaRate == 22 || priv->CurrentOperaRate == 72)
TryUpTh += 9;
//
// Let these rates down more difficult.
//
- if(MgntIsCckRate(priv->CurrentOperaRate) || priv->CurrentOperaRate == 36)
+ if (MgntIsCckRate(priv->CurrentOperaRate) || priv->CurrentOperaRate == 36)
TryDownTh += 1;
//1 Adjust Rate.
@@ -640,7 +610,7 @@ StaRateAdaptive87SE(
// We randomly upgrade the data rate and check if the retry rate is improved.
// Upgrading rate did not improve the retry rate, fallback to the original rate.
- if ( (CurrRetryRate > 25) && TxThroughput < priv->LastTxThroughput) {
+ if ((CurrRetryRate > 25) && TxThroughput < priv->LastTxThroughput) {
//Not necessary raising rate, fall back rate.
bTryDown = true;
//printk("case1-1: Not necessary raising rate, fall back rate....\n");
@@ -658,14 +628,14 @@ StaRateAdaptive87SE(
// Revise SignalStrength threshold to -51dbm.
//
// Also need to check retry rate for safety, by Bruce, 2007-06-05.
- if(priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate ) {
+ if (priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate) {
bTryUp = true;
// Upgrade Tx Rate directly.
priv->TryupingCount += TryUpTh;
}
// printk("case2: StaRateAdaptive87SE: Power(%d) is high enough!!. \n", CurrSignalStrength);
- } else if(CurrTxokCnt > 9 && CurrTxokCnt< 100 && CurrRetryRate >= 600) {
+ } else if (CurrTxokCnt > 9 && CurrTxokCnt < 100 && CurrRetryRate >= 600) {
//2 For Serious Retry
//
// Traffic is not busy but our Tx retry is serious.
@@ -674,161 +644,161 @@ StaRateAdaptive87SE(
// Let Rate Mechanism to degrade tx rate directly.
priv->TryDownCountLowData += TryDownTh;
// printk("case3: RA: Tx Retry is serious. Degrade Tx Rate to %d directly...\n", priv->CurrentOperaRate);
- } else if ( priv->CurrentOperaRate == 108 ) {
+ } else if (priv->CurrentOperaRate == 108) {
//2For 54Mbps
// Air Link
- if ( (CurrRetryRate>26)&&(priv->LastRetryRate>25)) {
-// if ( (CurrRetryRate>40)&&(priv->LastRetryRate>39))
+ if ((CurrRetryRate > 26) && (priv->LastRetryRate > 25)) {
+// if ((CurrRetryRate>40)&&(priv->LastRetryRate>39))
//Down to rate 48Mbps.
bTryDown = true;
}
// Cable Link
- else if ( (CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72)) {
-// else if ( (CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72))
+ else if ((CurrRetryRate > 17) && (priv->LastRetryRate > 16) && (CurrSignalStrength > -72)) {
+// else if ((CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72))
//Down to rate 48Mbps.
bTryDown = true;
}
- if(bTryDown && (CurrSignalStrength < -75)) //cable link
+ if (bTryDown && (CurrSignalStrength < -75)) //cable link
priv->TryDownCountLowData += TryDownTh;
//printk("case4---54M \n");
}
- else if ( priv->CurrentOperaRate == 96 ) {
+ else if (priv->CurrentOperaRate == 96) {
//2For 48Mbps
//Air Link
- if ( ((CurrRetryRate>48) && (priv->LastRetryRate>47))) {
+ if (((CurrRetryRate > 48) && (priv->LastRetryRate > 47))) {
// if ( ((CurrRetryRate>65) && (priv->LastRetryRate>64)))
//Down to rate 36Mbps.
bTryDown = true;
- } else if ( ((CurrRetryRate>21) && (priv->LastRetryRate>20)) && (CurrSignalStrength > -74)) { //Cable Link
+ } else if (((CurrRetryRate > 21) && (priv->LastRetryRate > 20)) && (CurrSignalStrength > -74)) { //Cable Link
//Down to rate 36Mbps.
bTryDown = true;
- } else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) {
+ } else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))
bTryDown = true;
priv->TryDownCountLowData += TryDownTh;
- } else if ( (CurrRetryRate<8) && (priv->LastRetryRate<8) ) { //TO DO: need to consider (RSSI)
+ } else if ((CurrRetryRate < 8) && (priv->LastRetryRate < 8)) { //TO DO: need to consider (RSSI)
// else if ( (CurrRetryRate<28) && (priv->LastRetryRate<8) )
bTryUp = true;
}
- if(bTryDown && (CurrSignalStrength < -75)){
+ if (bTryDown && (CurrSignalStrength < -75)){
priv->TryDownCountLowData += TryDownTh;
}
//printk("case5---48M \n");
- } else if ( priv->CurrentOperaRate == 72 ) {
+ } else if (priv->CurrentOperaRate == 72) {
//2For 36Mbps
- if ( (CurrRetryRate>43) && (priv->LastRetryRate>41)) {
+ if ((CurrRetryRate > 43) && (priv->LastRetryRate > 41)) {
// if ( (CurrRetryRate>60) && (priv->LastRetryRate>59))
//Down to rate 24Mbps.
bTryDown = true;
- } else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) {
+ } else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))
bTryDown = true;
priv->TryDownCountLowData += TryDownTh;
- } else if ( (CurrRetryRate<15) && (priv->LastRetryRate<16)) { //TO DO: need to consider (RSSI)
+ } else if ((CurrRetryRate < 15) && (priv->LastRetryRate < 16)) { //TO DO: need to consider (RSSI)
// else if ( (CurrRetryRate<35) && (priv->LastRetryRate<36))
bTryUp = true;
}
- if(bTryDown && (CurrSignalStrength < -80))
+ if (bTryDown && (CurrSignalStrength < -80))
priv->TryDownCountLowData += TryDownTh;
//printk("case6---36M \n");
- } else if ( priv->CurrentOperaRate == 48 ) {
+ } else if (priv->CurrentOperaRate == 48) {
//2For 24Mbps
// Air Link
- if ( ((CurrRetryRate>63) && (priv->LastRetryRate>62))) {
+ if (((CurrRetryRate > 63) && (priv->LastRetryRate > 62))) {
// if ( ((CurrRetryRate>83) && (priv->LastRetryRate>82)))
//Down to rate 18Mbps.
bTryDown = true;
- } else if ( ((CurrRetryRate>33) && (priv->LastRetryRate>32)) && (CurrSignalStrength > -82) ) { //Cable Link
+ } else if (((CurrRetryRate > 33) && (priv->LastRetryRate > 32)) && (CurrSignalStrength > -82)) { //Cable Link
// else if ( ((CurrRetryRate>50) && (priv->LastRetryRate>49)) && (CurrSignalStrength > -82) )
//Down to rate 18Mbps.
bTryDown = true;
- } else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) {
+ } else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2 )) {
// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))
bTryDown = true;
priv->TryDownCountLowData += TryDownTh;
- } else if ( (CurrRetryRate<20) && (priv->LastRetryRate<21)) { //TO DO: need to consider (RSSI)
+ } else if ((CurrRetryRate < 20) && (priv->LastRetryRate < 21)) { //TO DO: need to consider (RSSI)
// else if ( (CurrRetryRate<40) && (priv->LastRetryRate<41))
bTryUp = true;
}
- if(bTryDown && (CurrSignalStrength < -82))
+ if (bTryDown && (CurrSignalStrength < -82))
priv->TryDownCountLowData += TryDownTh;
//printk("case7---24M \n");
- } else if ( priv->CurrentOperaRate == 36 ) {
+ } else if (priv->CurrentOperaRate == 36) {
//2For 18Mbps
// original (109, 109)
//[TRC Dell Lab] (90, 91), Isaiah 2008-02-18 23:24
// (85, 86), Isaiah 2008-02-18 24:00
- if ( ((CurrRetryRate>85) && (priv->LastRetryRate>86))) {
+ if (((CurrRetryRate > 85) && (priv->LastRetryRate > 86))) {
// if ( ((CurrRetryRate>115) && (priv->LastRetryRate>116)))
//Down to rate 11Mbps.
bTryDown = true;
//[TRC Dell Lab] Isaiah 2008-02-18 23:24
- } else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) {
+ } else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))
bTryDown = true;
priv->TryDownCountLowData += TryDownTh;
- } else if ( (CurrRetryRate<22) && (priv->LastRetryRate<23)) { //TO DO: need to consider (RSSI)
+ } else if ((CurrRetryRate < 22) && (priv->LastRetryRate < 23)) { //TO DO: need to consider (RSSI)
// else if ( (CurrRetryRate<42) && (priv->LastRetryRate<43))
bTryUp = true;
}
//printk("case8---18M \n");
- } else if ( priv->CurrentOperaRate == 22 ) {
+ } else if (priv->CurrentOperaRate == 22) {
//2For 11Mbps
- if (CurrRetryRate>95) {
+ if (CurrRetryRate > 95) {
// if (CurrRetryRate>155)
bTryDown = true;
}
- else if ( (CurrRetryRate<29) && (priv->LastRetryRate <30) ) { //TO DO: need to consider (RSSI)
+ else if ((CurrRetryRate < 29) && (priv->LastRetryRate < 30)) { //TO DO: need to consider (RSSI)
// else if ( (CurrRetryRate<49) && (priv->LastRetryRate <50) )
bTryUp = true;
}
//printk("case9---11M \n");
- } else if ( priv->CurrentOperaRate == 11 ) {
+ } else if (priv->CurrentOperaRate == 11) {
//2For 5.5Mbps
- if (CurrRetryRate>149) {
+ if (CurrRetryRate > 149) {
// if (CurrRetryRate>189)
bTryDown = true;
- } else if ( (CurrRetryRate<60) && (priv->LastRetryRate < 65)) {
+ } else if ((CurrRetryRate < 60) && (priv->LastRetryRate < 65)) {
// else if ( (CurrRetryRate<80) && (priv->LastRetryRate < 85))
bTryUp = true;
}
//printk("case10---5.5M \n");
- } else if ( priv->CurrentOperaRate == 4 ) {
+ } else if (priv->CurrentOperaRate == 4) {
//2For 2 Mbps
- if((CurrRetryRate>99) && (priv->LastRetryRate>99)) {
+ if ((CurrRetryRate > 99) && (priv->LastRetryRate > 99)) {
// if((CurrRetryRate>199) && (priv->LastRetryRate>199))
bTryDown = true;
- } else if ( (CurrRetryRate < 65) && (priv->LastRetryRate < 70)) {
+ } else if ((CurrRetryRate < 65) && (priv->LastRetryRate < 70)) {
// else if ( (CurrRetryRate < 85) && (priv->LastRetryRate < 90))
bTryUp = true;
}
//printk("case11---2M \n");
- } else if ( priv->CurrentOperaRate == 2 ) {
+ } else if (priv->CurrentOperaRate == 2) {
//2For 1 Mbps
- if( (CurrRetryRate<70) && (priv->LastRetryRate<75)) {
+ if ((CurrRetryRate < 70) && (priv->LastRetryRate < 75)) {
// if( (CurrRetryRate<90) && (priv->LastRetryRate<95))
bTryUp = true;
}
//printk("case12---1M \n");
}
- if(bTryUp && bTryDown)
+ if (bTryUp && bTryDown)
printk("StaRateAdaptive87B(): Tx Rate tried upping and downing simultaneously!\n");
//1 Test Upgrading Tx Rate
// Sometimes the cause of the low throughput (high retry rate) is the compatibility between the AP and NIC.
// To test if the upper rate may cause lower retry rate, this mechanism randomly occurs to test upgrading tx rate.
- if(!bTryUp && !bTryDown && (priv->TryupingCount == 0) && (priv->TryDownCountLowData == 0)
+ if (!bTryUp && !bTryDown && (priv->TryupingCount == 0) && (priv->TryDownCountLowData == 0)
&& priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate && priv->FailTxRateCount < 2) {
- if(jiffies% (CurrRetryRate + 101) == 0) {
+ if (jiffies % (CurrRetryRate + 101) == 0) {
bTryUp = true;
priv->bTryuping = true;
//printk("StaRateAdaptive87SE(): Randomly try upgrading...\n");
@@ -836,7 +806,7 @@ StaRateAdaptive87SE(
}
//1 Rate Mechanism
- if(bTryUp) {
+ if (bTryUp) {
priv->TryupingCount++;
priv->TryDownCountLowData = 0;
@@ -852,21 +822,21 @@ StaRateAdaptive87SE(
// this condition will be satisfied at most every 2 min.
//
- if((priv->TryupingCount > (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount)) ||
+ if ((priv->TryupingCount > (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount)) ||
(CurrSignalStrength > priv->LastFailTxRateSS) || priv->bTryuping) {
priv->TryupingCount = 0;
//
// When transferring from CCK to OFDM, DIG is an important issue.
//
- if(priv->CurrentOperaRate == 22)
+ if (priv->CurrentOperaRate == 22)
bUpdateInitialGain = true;
// The difference in throughput between 48Mbps and 36Mbps is 8M.
// So, we must be carefully in this rate scale. Isaiah 2008-02-15.
//
- if( ((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) &&
- (priv->FailTxRateCount > 2) )
- priv->RateAdaptivePeriod= (RATE_ADAPTIVE_TIMER_PERIOD/2);
+ if (((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) &&
+ (priv->FailTxRateCount > 2))
+ priv->RateAdaptivePeriod = (RATE_ADAPTIVE_TIMER_PERIOD / 2);
// (1)To avoid upgrade frequently to the fail tx rate, add the FailTxRateCount into the threshold.
// (2)If the signal strength is increased, it may be able to upgrade.
@@ -875,29 +845,29 @@ StaRateAdaptive87SE(
// printk("StaRateAdaptive87SE(): Upgrade Tx Rate to %d\n", priv->CurrentOperaRate);
//[TRC Dell Lab] Bypass 12/9/6, Isaiah 2008-02-18 20:00
- if(priv->CurrentOperaRate ==36) {
- priv->bUpdateARFR=true;
+ if (priv->CurrentOperaRate == 36) {
+ priv->bUpdateARFR = true;
write_nic_word(dev, ARFR, 0x0F8F); //bypass 12/9/6
// printk("UP: ARFR=0xF8F\n");
} else if(priv->bUpdateARFR) {
- priv->bUpdateARFR=false;
+ priv->bUpdateARFR = false;
write_nic_word(dev, ARFR, 0x0FFF); //set 1M ~ 54Mbps.
// printk("UP: ARFR=0xFFF\n");
}
// Update Fail Tx rate and count.
- if(priv->LastFailTxRate != priv->CurrentOperaRate) {
+ if (priv->LastFailTxRate != priv->CurrentOperaRate) {
priv->LastFailTxRate = priv->CurrentOperaRate;
priv->FailTxRateCount = 0;
priv->LastFailTxRateSS = -200; // Set lowest power.
}
}
} else {
- if(priv->TryupingCount > 0)
+ if (priv->TryupingCount > 0)
priv->TryupingCount --;
}
- if(bTryDown) {
+ if (bTryDown) {
priv->TryDownCountLowData++;
priv->TryupingCount = 0;
@@ -907,14 +877,14 @@ StaRateAdaptive87SE(
//Check if Tx rate can be degraded or Test trying upgrading should fallback.
- if(priv->TryDownCountLowData > TryDownTh || priv->bTryuping) {
+ if (priv->TryDownCountLowData > TryDownTh || priv->bTryuping) {
priv->TryDownCountLowData = 0;
priv->bTryuping = false;
// Update fail information.
- if(priv->LastFailTxRate == priv->CurrentOperaRate) {
- priv->FailTxRateCount ++;
+ if (priv->LastFailTxRate == priv->CurrentOperaRate) {
+ priv->FailTxRateCount++;
// Record the Tx fail rate signal strength.
- if(CurrSignalStrength > priv->LastFailTxRateSS)
+ if (CurrSignalStrength > priv->LastFailTxRateSS)
priv->LastFailTxRateSS = CurrSignalStrength;
} else {
priv->LastFailTxRate = priv->CurrentOperaRate;
@@ -925,18 +895,18 @@ StaRateAdaptive87SE(
// Reduce chariot training time at weak signal strength situation. SD3 ED demand.
//[TRC Dell Lab] Revise Signal Threshold from -75 to -80 , Isaiah 2008-02-18 20:00
- if( (CurrSignalStrength < -80) && (priv->CurrentOperaRate > 72 )) {
+ if ((CurrSignalStrength < -80) && (priv->CurrentOperaRate > 72 )) {
priv->CurrentOperaRate = 72;
// printk("DN: weak signal strength (%d), degrade to 36Mbps\n", CurrSignalStrength);
}
//[TRC Dell Lab] Bypass 12/9/6, Isaiah 2008-02-18 20:00
- if(priv->CurrentOperaRate ==36) {
- priv->bUpdateARFR=true;
+ if (priv->CurrentOperaRate == 36) {
+ priv->bUpdateARFR = true;
write_nic_word(dev, ARFR, 0x0F8F); //bypass 12/9/6
// printk("DN: ARFR=0xF8F\n");
- } else if(priv->bUpdateARFR) {
- priv->bUpdateARFR=false;
+ } else if (priv->bUpdateARFR) {
+ priv->bUpdateARFR = false;
write_nic_word(dev, ARFR, 0x0FFF); //set 1M ~ 54Mbps.
// printk("DN: ARFR=0xFFF\n");
}
@@ -944,21 +914,21 @@ StaRateAdaptive87SE(
//
// When it is CCK rate, it may need to update initial gain to receive lower power packets.
//
- if(MgntIsCckRate(priv->CurrentOperaRate)) {
+ if (MgntIsCckRate(priv->CurrentOperaRate)) {
bUpdateInitialGain = true;
}
// printk("StaRateAdaptive87SE(): Degrade Tx Rate to %d\n", priv->CurrentOperaRate);
}
} else {
- if(priv->TryDownCountLowData > 0)
- priv->TryDownCountLowData --;
+ if (priv->TryDownCountLowData > 0)
+ priv->TryDownCountLowData--;
}
// Keep the Tx fail rate count to equal to 0x15 at most.
// Reduce the fail count at least to 10 sec if tx rate is tending stable.
- if(priv->FailTxRateCount >= 0x15 ||
+ if (priv->FailTxRateCount >= 0x15 ||
(!bTryUp && !bTryDown && priv->TryDownCountLowData == 0 && priv->TryupingCount && priv->FailTxRateCount > 0x6)) {
- priv->FailTxRateCount --;
+ priv->FailTxRateCount--;
}
@@ -966,41 +936,41 @@ StaRateAdaptive87SE(
CckTxPwrIdx = priv->chtxpwr[priv->ieee80211->current_network.channel];
//[TRC Dell Lab] Mac0x9e increase 2 level in 36M~18M situation, Isaiah 2008-02-18 24:00
- if((priv->CurrentOperaRate < 96) &&(priv->CurrentOperaRate > 22)) {
+ if ((priv->CurrentOperaRate < 96) && (priv->CurrentOperaRate > 22)) {
u1bCck = read_nic_byte(dev, CCK_TXAGC);
u1bOfdm = read_nic_byte(dev, OFDM_TXAGC);
// case 1: Never enter High power
- if(u1bCck == CckTxPwrIdx ) {
- if(u1bOfdm != (OfdmTxPwrIdx+2) ) {
- priv->bEnhanceTxPwr= true;
- u1bOfdm = ((u1bOfdm+2) > 35) ? 35: (u1bOfdm+2);
+ if (u1bCck == CckTxPwrIdx) {
+ if (u1bOfdm != (OfdmTxPwrIdx + 2)) {
+ priv->bEnhanceTxPwr = true;
+ u1bOfdm = ((u1bOfdm + 2) > 35) ? 35: (u1bOfdm + 2);
write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
// printk("Enhance OFDM_TXAGC : +++++ u1bOfdm= 0x%x\n", u1bOfdm);
}
- } else if(u1bCck < CckTxPwrIdx) {
+ } else if (u1bCck < CckTxPwrIdx) {
// case 2: enter high power
- if(!priv->bEnhanceTxPwr) {
- priv->bEnhanceTxPwr= true;
- u1bOfdm = ((u1bOfdm+2) > 35) ? 35: (u1bOfdm+2);
+ if (!priv->bEnhanceTxPwr) {
+ priv->bEnhanceTxPwr = true;
+ u1bOfdm = ((u1bOfdm + 2) > 35) ? 35: (u1bOfdm + 2);
write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
//RT_TRACE(COMP_RATE, DBG_TRACE, ("Enhance OFDM_TXAGC(2) : +++++ u1bOfdm= 0x%x\n", u1bOfdm));
}
}
- } else if(priv->bEnhanceTxPwr) { //54/48/11/5.5/2/1
+ } else if (priv->bEnhanceTxPwr) { //54/48/11/5.5/2/1
u1bCck = read_nic_byte(dev, CCK_TXAGC);
u1bOfdm = read_nic_byte(dev, OFDM_TXAGC);
// case 1: Never enter High power
- if(u1bCck == CckTxPwrIdx ) {
- priv->bEnhanceTxPwr= false;
+ if (u1bCck == CckTxPwrIdx) {
+ priv->bEnhanceTxPwr = false;
write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);
//printk("Recover OFDM_TXAGC : ===== u1bOfdm= 0x%x\n", OfdmTxPwrIdx);
}
// case 2: enter high power
- else if(u1bCck < CckTxPwrIdx) {
- priv->bEnhanceTxPwr= false;
- u1bOfdm = ((u1bOfdm-2) > 0) ? (u1bOfdm-2): 0;
+ else if (u1bCck < CckTxPwrIdx) {
+ priv->bEnhanceTxPwr = false;
+ u1bOfdm = ((u1bOfdm - 2) > 0) ? (u1bOfdm - 2): 0;
write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
//RT_TRACE(COMP_RATE, DBG_TRACE, ("Recover OFDM_TXAGC(2): ===== u1bOfdm= 0x%x\n", u1bOfdm));
@@ -1012,29 +982,29 @@ StaRateAdaptive87SE(
// "from CCK to OFDM".
//
SetInitialGain:
- if(bUpdateInitialGain) {
- if(MgntIsCckRate(priv->CurrentOperaRate)) { // CCK
- if(priv->InitialGain > priv->RegBModeGainStage) {
- priv->InitialGainBackUp= priv->InitialGain;
+ if (bUpdateInitialGain) {
+ if (MgntIsCckRate(priv->CurrentOperaRate)) { // CCK
+ if (priv->InitialGain > priv->RegBModeGainStage) {
+ priv->InitialGainBackUp = priv->InitialGain;
- if(CurrSignalStrength < -85) // Low power, OFDM [0x17] = 26.
+ if (CurrSignalStrength < -85) // Low power, OFDM [0x17] = 26.
//SD3 SYs suggest that CurrSignalStrength < -65, ofdm 0x17=26.
priv->InitialGain = priv->RegBModeGainStage;
- else if(priv->InitialGain > priv->RegBModeGainStage + 1)
+ else if (priv->InitialGain > priv->RegBModeGainStage + 1)
priv->InitialGain -= 2;
else
- priv->InitialGain --;
+ priv->InitialGain--;
printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate);
UpdateInitialGain(dev);
}
} else { // OFDM
- if(priv->InitialGain < 4) {
- priv->InitialGainBackUp= priv->InitialGain;
+ if (priv->InitialGain < 4) {
+ priv->InitialGainBackUp = priv->InitialGain;
- priv->InitialGain ++;
+ priv->InitialGain++;
printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate);
UpdateInitialGain(dev);
}
@@ -1047,10 +1017,10 @@ SetInitialGain:
priv->ieee80211->rate = priv->CurrentOperaRate * 5;
}
-void rtl8180_rate_adapter(struct work_struct * work)
+void rtl8180_rate_adapter(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
- struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,rate_adapter_wq);
+ struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, rate_adapter_wq);
struct net_device *dev = ieee->dev;
//struct r8180_priv *priv = ieee80211_priv(dev);
// DMESG("---->rtl8180_rate_adapter");
@@ -1059,15 +1029,15 @@ void rtl8180_rate_adapter(struct work_struct * work)
}
void timer_rate_adaptive(unsigned long data)
{
- struct r8180_priv* priv = ieee80211_priv((struct net_device *)data);
+ struct r8180_priv *priv = ieee80211_priv((struct net_device *)data);
//DMESG("---->timer_rate_adaptive()\n");
- if(!priv->up) {
+ if (!priv->up) {
// DMESG("<----timer_rate_adaptive():driver is not up!\n");
return;
}
- if((priv->ieee80211->iw_mode != IW_MODE_MASTER)
+ if ((priv->ieee80211->iw_mode != IW_MODE_MASTER)
&& (priv->ieee80211->state == IEEE80211_LINKED) &&
- (priv->ForcedDataRate == 0) ) {
+ (priv->ForcedDataRate == 0)) {
// DMESG("timer_rate_adaptive():schedule rate_adapter_wq\n");
queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->rate_adapter_wq);
// StaRateAdaptive87SE((struct net_device *)data);
@@ -1077,11 +1047,7 @@ void timer_rate_adaptive(unsigned long data)
//DMESG("<----timer_rate_adaptive()\n");
}
//by amy 080312}
-void
-SwAntennaDiversityRxOk8185(
- struct net_device *dev,
- u8 SignalStrength
- )
+void SwAntennaDiversityRxOk8185(struct net_device *dev, u8 SignalStrength)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -1089,13 +1055,13 @@ SwAntennaDiversityRxOk8185(
priv->AdRxOkCnt++;
- if( priv->AdRxSignalStrength != -1) {
- priv->AdRxSignalStrength = ((priv->AdRxSignalStrength*7) + (SignalStrength*3)) / 10;
+ if (priv->AdRxSignalStrength != -1) {
+ priv->AdRxSignalStrength = ((priv->AdRxSignalStrength * 7) + (SignalStrength * 3)) / 10;
} else { // Initialization case.
priv->AdRxSignalStrength = SignalStrength;
}
//{+by amy 080312
- if( priv->LastRxPktAntenna ) //Main antenna.
+ if (priv->LastRxPktAntenna) //Main antenna.
priv->AdMainAntennaRxOkCnt++;
else // Aux antenna.
priv->AdAuxAntennaRxOkCnt++;
@@ -1106,18 +1072,14 @@ SwAntennaDiversityRxOk8185(
// Description:
// Change Antenna Switch.
//
-bool
-SetAntenna8185(
- struct net_device *dev,
- u8 u1bAntennaIndex
- )
+bool SetAntenna8185(struct net_device *dev, u8 u1bAntennaIndex)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
bool bAntennaSwitched = false;
// printk("+SetAntenna8185(): Antenna is switching to: %d \n", u1bAntennaIndex);
- switch(u1bAntennaIndex) {
+ switch (u1bAntennaIndex) {
case 0:
/* Mac register, main antenna */
write_nic_byte(dev, ANTSEL, 0x03);
@@ -1155,16 +1117,13 @@ SetAntenna8185(
// Description:
// Toggle Antenna switch.
//
-bool
-SwitchAntenna(
- struct net_device *dev
- )
+bool SwitchAntenna(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
bool bResult;
- if(priv->CurrAntennaIndex == 0) {
+ if (priv->CurrAntennaIndex == 0) {
bResult = SetAntenna8185(dev, 1);
//by amy 080312
// printk("SwitchAntenna(): switching to antenna 1 ......\n");
@@ -1186,17 +1145,14 @@ SwitchAntenna(
//
// 2006.04.17, by rcnjko.
//
-void
-SwAntennaDiversity(
- struct net_device *dev
- )
+void SwAntennaDiversity(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- bool bSwCheckSS=false;
+ bool bSwCheckSS = false;
// printk("+SwAntennaDiversity(): CurrAntennaIndex: %d\n", priv->CurrAntennaIndex);
// printk("AdTickCount is %d\n",priv->AdTickCount);
//by amy 080312
- if(bSwCheckSS) {
+ if (bSwCheckSS) {
priv->AdTickCount++;
printk("(1) AdTickCount: %d, AdCheckPeriod: %d\n",
@@ -1207,7 +1163,7 @@ SwAntennaDiversity(
// priv->AdTickCount++;//-by amy 080312
// Case 1. No Link.
- if(priv->ieee80211->state != IEEE80211_LINKED) {
+ if (priv->ieee80211->state != IEEE80211_LINKED) {
// printk("SwAntennaDiversity(): Case 1. No Link.\n");
priv->bAdSwitchedChecking = false;
@@ -1215,14 +1171,14 @@ SwAntennaDiversity(
SwitchAntenna(dev);
// Case 2. Linked but no packet receive.d
- } else if(priv->AdRxOkCnt == 0) {
+ } else if (priv->AdRxOkCnt == 0) {
// printk("SwAntennaDiversity(): Case 2. Linked but no packet received.\n");
priv->bAdSwitchedChecking = false;
SwitchAntenna(dev);
// Case 3. Evaluate last antenna switch action and undo it if necessary.
- } else if(priv->bAdSwitchedChecking == true) {
+ } else if (priv->bAdSwitchedChecking == true) {
// printk("SwAntennaDiversity(): Case 3. Evaluate last antenna switch action.\n");
priv->bAdSwitchedChecking = false;
@@ -1241,7 +1197,7 @@ SwAntennaDiversity(
priv->AdCheckPeriod *= 2;
//by amy 080312
// Increase Antenna Diversity checking period.
- if(priv->AdCheckPeriod > priv->AdMaxCheckPeriod)
+ if (priv->AdCheckPeriod > priv->AdMaxCheckPeriod)
priv->AdCheckPeriod = priv->AdMaxCheckPeriod;
// Wrong deceision => switch back.
@@ -1277,7 +1233,7 @@ SwAntennaDiversity(
// Evaluate RxOk count from each antenna if we shall switch default antenna now.
// Added by Roger, 2008.02.21.
//{by amy 080312
- if((priv->AdMainAntennaRxOkCnt < priv->AdAuxAntennaRxOkCnt)
+ if ((priv->AdMainAntennaRxOkCnt < priv->AdAuxAntennaRxOkCnt)
&& (priv->CurrAntennaIndex == 0)) {
// We set Main antenna as default but RxOk count was less than Aux ones.
@@ -1287,7 +1243,7 @@ SwAntennaDiversity(
// Switch to Aux antenna.
SwitchAntenna(dev);
priv->bHWAdSwitched = true;
- } else if((priv->AdAuxAntennaRxOkCnt < priv->AdMainAntennaRxOkCnt)
+ } else if ((priv->AdAuxAntennaRxOkCnt < priv->AdMainAntennaRxOkCnt)
&& (priv->CurrAntennaIndex == 1)) {
// We set Aux antenna as default but RxOk count was less than Main ones.
@@ -1317,10 +1273,10 @@ SwAntennaDiversity(
// Our guess is that main antenna have lower throughput and get many change
// to receive more CCK packets(ex.Beacon) which have stronger SignalStrength.
//
- if( (!priv->bHWAdSwitched) && (bSwCheckSS)) {
+ if ((!priv->bHWAdSwitched) && (bSwCheckSS)) {
//by amy 080312}
// Evaluate Rx signal strength if we shall switch antenna now.
- if(priv->AdRxSignalStrength < priv->AdRxSsThreshold) {
+ if (priv->AdRxSignalStrength < priv->AdRxSsThreshold) {
// Rx signal strength is weak => Switch Antenna.
// printk("SwAntennaDiversity(): Rx Signal Strength is weak, CurrRxSs: %d, RxSsThreshold: %d\n",
// priv->AdRxSignalStrength, priv->AdRxSsThreshold);
@@ -1336,7 +1292,7 @@ SwAntennaDiversity(
priv->bAdSwitchedChecking = false;
// Increase Rx signal strength threshold if necessary.
- if( (priv->AdRxSignalStrength > (priv->AdRxSsThreshold + 10)) && // Signal is much stronger than current threshold
+ if ((priv->AdRxSignalStrength > (priv->AdRxSsThreshold + 10)) && // Signal is much stronger than current threshold
priv->AdRxSsThreshold <= priv->AdMaxRxSsThreshold) { // Current threhold is not yet reach upper limit.
priv->AdRxSsThreshold = (priv->AdRxSsThreshold + priv->AdRxSignalStrength) / 2;
@@ -1345,7 +1301,7 @@ SwAntennaDiversity(
}
// Reduce Antenna Diversity checking period if possible.
- if( priv->AdCheckPeriod > priv->AdMinCheckPeriod )
+ if (priv->AdCheckPeriod > priv->AdMinCheckPeriod)
priv->AdCheckPeriod /= 2;
}
}
@@ -1366,12 +1322,11 @@ SwAntennaDiversity(
// Description:
// Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise.
//
-bool
-CheckTxPwrTracking( struct net_device *dev)
+bool CheckTxPwrTracking(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- if(!priv->bTxPowerTrack)
+ if (!priv->bTxPowerTrack)
return false;
//lzm reserved 080826
@@ -1381,7 +1336,7 @@ CheckTxPwrTracking( struct net_device *dev)
//}
//if 87SE is in High Power , don't do Tx Power Tracking. asked by SD3 ED. 2008-08-08 Isaiah
- if(priv->bToUpdateTxPwr)
+ if (priv->bToUpdateTxPwr)
return false;
return true;
@@ -1392,10 +1347,7 @@ CheckTxPwrTracking( struct net_device *dev)
// Description:
// Timer callback function of SW Antenna Diversity.
//
-void
-SwAntennaDiversityTimerCallback(
- struct net_device *dev
- )
+void SwAntennaDiversityTimerCallback(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
RT_RF_POWER_STATE rtState;
@@ -1418,9 +1370,9 @@ SwAntennaDiversityTimerCallback(
}
SwAntennaDiversity(dev);
- } while(false);
+ } while (false);
- if(priv->up) {
+ if (priv->up) {
priv->SwAntennaDiversityTimer.expires = jiffies + MSECS(ANTENNA_DIVERSITY_TIMER_PERIOD);
add_timer(&priv->SwAntennaDiversityTimer);
}
--
1.7.7.6
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
