Cleaned up some trailing spaces
Signed-off-by: Andrew Miller <amiller@xxxxxxxxx>
---
drivers/staging/rtl8187se/r8180_core.c | 26 +++++++++++++-------------
1 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index e6e39c8..d1a3e65 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -1619,9 +1619,9 @@ void rtl8180_rx(struct net_device *dev)
!bHwError && !bCRC && !bICV &&
eqMacAddr(priv->ieee80211->current_network.bssid,
fc & IEEE80211_FCTL_TODS ? hdr->addr1 :
- fc & IEEE80211_FCTL_FROMDS ? hdr->addr2 :
+ fc & IEEE80211_FCTL_FROMDS ? hdr->addr2 :
hdr->addr3)) {
-
+
/* Perform signal smoothing for dynamic
* mechanism on demand. This is different
* with PerformSignalSmoothing8185 in smoothing
@@ -1658,7 +1658,7 @@ void rtl8180_rx(struct net_device *dev)
}
/* support for prism header has been originally added by Christian */
if (priv->prism_hdr && priv->ieee80211->iw_mode == IW_MODE_MONITOR) {
-
+
} else {
priv->rx_skb = dev_alloc_skb(len+2);
if (!priv->rx_skb)
@@ -1770,7 +1770,7 @@ void rtl8180_data_hard_resume(struct net_device *dev)
rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
}
-/*
+/*
* This function TX data frames when the ieee80211 stack requires this.
* It checks also if we need to stop the ieee tx queue, eventually do it
*/
@@ -1814,7 +1814,7 @@ rate) {
spin_unlock_irqrestore(&priv->tx_lock, flags);
}
-/*
+/*
* This is a rough attempt to TX a frame
* This is called by the ieee 80211 stack to TX management frames.
* If the ring is full packet are dropped (for data frame the queue
@@ -1920,7 +1920,7 @@ void rtl8180_prepare_beacon(struct net_device *dev)
}
}
-/*
+/*
* This function do the real dirty work: it enqueues a TX command
* descriptor in the ring buffer, copyes the frame in a TX buffer
* and kicks the NIC to ensure it does the DMA transfer.
@@ -2188,7 +2188,7 @@ short rtl8180_tx(struct net_device *dev, u8* txbuf, int len, int priority,
priv->txhpbufstail = buflist;
break;
case BEACON_PRIORITY:
- /*
+ /*
* The HW seems to be happy with the 1st
* descriptor filled and the 2nd empty...
* So always update descriptor 1 and never
@@ -2308,13 +2308,13 @@ void rtl8180_hw_sleep(struct net_device *dev, u32 th, u32 tl)
spin_lock_irqsave(&priv->ps_lock, flags);
- /*
+ /*
* Writing HW register with 0 equals to disable
* the timer, that is not really what we want
*/
tl -= MSECS(4+16+7);
- /*
+ /*
* If the interval in witch we are requested to sleep is too
* short then give up and remain awake
*/
@@ -2332,7 +2332,7 @@ void rtl8180_hw_sleep(struct net_device *dev, u32 th, u32 tl)
queue_delayed_work(priv->ieee80211->wq, &priv->ieee80211->hw_wakeup_wq, tmp); /* as tl may be less than rb */
}
- /*
+ /*
* If we suspect the TimerInt is gone beyond tl
* while setting it, then give up
*/
@@ -3172,7 +3172,7 @@ void rtl8180_adapter_start(struct net_device *dev)
netif_start_queue(dev);
}
-/*
+/*
* This configures registers for beacon tx and enables it via
* rtl8180_beacon_tx_enable(). rtl8180_beacon_tx_disable() might
* be used to stop beacon transmission
@@ -3843,7 +3843,7 @@ void rtl8180_tx_isr(struct net_device *dev, int pri, short error)
return;
}
- /*
+ /*
* We check all the descriptors between the head and the nic,
* but not the currently pointed by the nic (the next to be txed)
* and the previous of the pointed (might be in process ??)
@@ -3881,7 +3881,7 @@ void rtl8180_tx_isr(struct net_device *dev, int pri, short error)
head += 8;
}
- /*
+ /*
* The head has been moved to the last certainly TXed
* (or at least processed by the nic) packet.
* The driver take forcefully owning of all these packets
--
1.7.7.6
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
