Re: [PATCH] Staging: rtl8187se: r8180_core.c: Fix coding style issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2012-03-13 at 20:58 -0400, Andrew Miller wrote:
> Fix long line coding style issue
> Signed-off-by: Andrew Miller <amiller@xxxxxxxxx>

Hi Andrew.

Please strive for clarity instead of just fixing
random 80 char warnings.

> diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
[]
> @@ -1607,17 +1609,20 @@ void rtl8180_rx(struct net_device *dev)
>  		/* printk("==========================>rx : RXAGC is %d,signalstrength is %d\n",RXAGC,stats.signalstrength); */
>  		stats.rssi = priv->wstats.qual.qual = priv->SignalQuality;
>  		stats.noise = priv->wstats.qual.noise = 100 - priv->wstats.qual.qual;
> -		bHwError = (((*(priv->rxringtail)) & (0x00000fff)) == 4080) | (((*(priv->rxringtail)) & (0x04000000)) != 0)
> -			| (((*(priv->rxringtail)) & (0x08000000)) != 0) | (((~(*(priv->rxringtail))) & (0x10000000)) != 0) | (((~(*(priv->rxringtail))) & (0x20000000)) != 0);
> +		bHwError = (((*(priv->rxringtail)) & (0x00000fff)) == 4080) |
> +			   (((*(priv->rxringtail)) & (0x04000000)) != 0) |
> +			   (((*(priv->rxringtail)) & (0x08000000)) != 0) |
> +			   (((~(*(priv->rxringtail))) & (0x10000000)) != 0) |
> +			   (((~(*(priv->rxringtail))) & (0x20000000)) != 0);

Likely these | uses should be ||

>  		bCRC = ((*(priv->rxringtail)) & (0x00002000)) >> 13;
>  		bICV = ((*(priv->rxringtail)) & (0x00001000)) >> 12;
>  		hdr = (struct ieee80211_hdr_4addr *)priv->rxbuffer->buf;
>  		    fc = le16_to_cpu(hdr->frame_ctl);
>  		type = WLAN_FC_GET_TYPE(fc);
>  
> -			if ((IEEE80211_FTYPE_CTL != type) &&
> -				(eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS) ? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS) ? hdr->addr2 : hdr->addr3))
> -				 && (!bHwError) && (!bCRC) && (!bICV)) {
> +			if ((IEEE80211_FTYPE_CTL != type) && (eqMacAddr(priv->ieee80211->current_network.bssid,
> +			    (fc & IEEE80211_FCTL_TODS) ? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS) ? hdr->addr2 : hdr->addr3))
> +			    && (!bHwError) && (!bCRC) && (!bICV)) {

This is difficult to read and could be better written
removing unnecessary parentheses and making the egMacAddr
clearer as a function/macro call:

			if (IEEE80211_FTYPE_CTL != type &&
			    eqMacAddr(priv->ieee80211->current_network.bssid,
				      fc & IEEE80211_FCTL_TODS ? hdr->addr1 :
				      fc & IEEE80211_FCTL_FROMDS ? hdr->addr2 :
				      hdr->addr3) &&
			    !bHwError &&
			    !bCRC &&
			    !bICV)

It might be better to reshuffle the test order too:
			if (IEEE80211_FTYPE_CTL != type &&
			   !bHwError && bCRC && !bICV &&
			    eqMacAddr(priv->ieee80211->current_network.bssid,
				      fc & IEEE80211_FCTL_TODS ? hdr->addr1 :
				      fc & IEEE80211_FCTL_FROMDS ? hdr->addr2 :
				      hdr->addr3))

etc...

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux