Drivers that load firmware from their probe routine have problems with the
latest versions of udev as they get timeouts while waiting for user
space to start. The problem is fixed by using request_firmware_nowait()
and delaying the start of mac80211 until the firmware is loaded.
To prevent the possibility of the driver being unloaded while the firmware
loading callback is still active, a completion queue entry is used.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
This conversion of p54spi to use asynchronous firmware loading is based
on the method used in p54usb. As I do not have the hardware, it is only
compile tested. I would appreciate any feedback from people that have the
hardware.
Larry
---
Index: wireless-testing-new/drivers/net/wireless/p54/p54spi.c
===================================================================
--- wireless-testing-new.orig/drivers/net/wireless/p54/p54spi.c
+++ wireless-testing-new/drivers/net/wireless/p54/p54spi.c
@@ -163,25 +163,41 @@ static int p54spi_spi_write_dma(struct p
return 0;
}
-static int p54spi_request_firmware(struct ieee80211_hw *dev)
+
+static void p54s_load_firmware_cb(const struct firmware *firmware,
+ void *context)
{
+ struct ieee80211_hw *dev = context;
struct p54s_priv *priv = dev->priv;
int ret;
- /* FIXME: should driver use it's own struct device? */
- ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev);
-
- if (ret < 0) {
- dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
- return ret;
+ if (!firmware) {
+ /* alternate firmware not found */
+ dev_err(&priv->spi->dev, "Firmware loading failed\n");
+ return;
}
+ complete(&priv->fw_loaded);
+ priv->firmware = firmware;
ret = p54_parse_firmware(dev, priv->firmware);
- if (ret) {
+ if (ret)
release_firmware(priv->firmware);
+}
+
+static int p54spi_request_firmware(struct ieee80211_hw *dev)
+{
+ struct p54s_priv *priv = dev->priv;
+ int ret;
+
+ init_completion(&priv->fw_loaded);
+ /* FIXME: should driver use it's own struct device? */
+ ret = request_firmware_nowait(THIS_MODULE, 1, "3826.arm",
+ &priv->spi->dev, GFP_KERNEL, dev,
+ p54s_load_firmware_cb);
+ if (ret < 0) {
+ dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
return ret;
}
-
return 0;
}
@@ -681,6 +697,7 @@ static int __devexit p54spi_remove(struc
{
struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+ wait_for_completion(&priv->fw_loaded);
p54_unregister_common(priv->hw);
free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
Index: wireless-testing-new/drivers/net/wireless/p54/p54spi.h
===================================================================
--- wireless-testing-new.orig/drivers/net/wireless/p54/p54spi.h
+++ wireless-testing-new/drivers/net/wireless/p54/p54spi.h
@@ -120,6 +120,7 @@ struct p54s_priv {
enum fw_state fw_state;
const struct firmware *firmware;
+ struct completion fw_loaded;
};
#endif /* P54SPI_H */
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
