This is a patch to the daqboard2000.c file that fixes up a line over 80
character warning found by the checkpatch.pl tool
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@xxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/daqboard2000.c | 13 +++++++++----
1 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index e61c6a8..2bbd121 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -414,7 +414,8 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
/* If pacer clock is not set to some high value (> 10 us), we
risk multiple samples to be put into the result FIFO. */
- fpga->acqPacerClockDivLow = 1000000; /* 1 second, should be long enough */
+ /* 1 second, should be long enough */
+ fpga->acqPacerClockDivLow = 1000000;
fpga->acqPacerClockDivHigh = 0;
gain = CR_RANGE(insn->chanspec);
@@ -483,7 +484,9 @@ static int daqboard2000_ao_insn_write(struct comedi_device *dev,
* OK, since it works OK without enabling the DAC's, let's keep
* it as simple as possible...
*/
- /* fpga->dacControl = (chan + 2) * 0x0010 | 0x0001; udelay(1000); */
+ /* fpga->dacControl = (chan + 2) * 0x0010 | 0x0001;
+ * udelay(1000);
+ */
fpga->dacSetting[chan] = data[i];
for (timeout = 0; timeout < 20; timeout++) {
if ((fpga->dacControl & ((chan + 1) * 0x0010)) == 0)
@@ -492,8 +495,10 @@ static int daqboard2000_ao_insn_write(struct comedi_device *dev,
}
devpriv->ao_readback[chan] = data[i];
/*
- * Since we never enabled the DAC's, we don't need to disable it...
- * fpga->dacControl = (chan + 2) * 0x0010 | 0x0000; udelay(1000);
+ * Since we never enabled the DAC's, we don't need to
+ * disable it...
+ * fpga->dacControl = (chan + 2) * 0x0010 | 0x0000;
+ * udelay(1000);
*/
}
--
1.7.0.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
