This is a patch to the ni_at_a2150.c file that fixes up a brace
warning found by the checkpatch.pl tool.
Removed unnecessary printk statement.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@xxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/ni_at_a2150.c | 27 ++++++++++---------------
1 files changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 32e675e..f5f21c6 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -349,17 +349,15 @@ static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it)
printk("comedi%d: %s: io 0x%lx", dev->minor, driver_a2150.driver_name,
iobase);
- if (irq) {
+ if (irq)
printk(", irq %u", irq);
- } else {
+ else
printk(", no irq");
- }
- if (dma) {
+
+ if (dma)
printk(", dma %u", dma);
- } else {
+ else
printk(", no dma");
- }
- printk("\n");
/* allocate and initialize dev->private */
if (alloc_private(dev, sizeof(struct a2150_private)) < 0)
@@ -731,9 +729,8 @@ static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
outw(trigger_bits, dev->iobase + TRIGGER_REG);
/* start acquisition for soft trigger */
- if (cmd->start_src == TRIG_NOW) {
+ if (cmd->start_src == TRIG_NOW)
outw(0, dev->iobase + FIFO_START_REG);
- }
#ifdef A2150_DEBUG
ni_dump_regs(dev);
#endif
@@ -860,11 +857,10 @@ static int a2150_get_timing(struct comedi_device *dev, unsigned int *period,
case TRIG_ROUND_NEAREST:
default:
/* if least upper bound is better approximation */
- if (lub - *period < *period - glb) {
+ if (lub - *period < *period - glb)
*period = lub;
- } else {
+ else
*period = glb;
- }
break;
case TRIG_ROUND_UP:
*period = lub;
@@ -903,13 +899,12 @@ static int a2150_set_chanlist(struct comedi_device *dev,
devpriv->config_bits |= CHANNEL_BITS(0x4 | start_channel);
break;
case 2:
- if (start_channel == 0) {
+ if (start_channel == 0)
devpriv->config_bits |= CHANNEL_BITS(0x2);
- } else if (start_channel == 2) {
+ else if (start_channel == 2)
devpriv->config_bits |= CHANNEL_BITS(0x3);
- } else {
+ else
return -1;
- }
break;
case 4:
devpriv->config_bits |= CHANNEL_BITS(0x1);
--
1.7.0.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
